Jump to content
Why become a member? ×

South west bass bash, yes a real one. Sunday 18th October.


Jimrs2k2
 Share

Recommended Posts

[quote name='Mornats' timestamp='1444597050' post='2884454']
Indeed! Is yours an Italian-made one?
[/quote]

I will be bringing and demonstrating my brand new, knockout brilliant Indonesian made Multiamp, Tr121h and tr151, and we'll discuss and put an end to this "is it italian made?" nonsense! I'm hoping I will also have the rather tiny and equally superb new Nano 300, which is also Indonesian made, but even though it is a new product, distributors around the world cannot get enough as all that are being made have already been pre-ordered...

Edited by MoJoKe
Link to comment
Share on other sites

[quote name='Mornats' timestamp='1444672694' post='2884997']
Well the MarkBass Italian vs. Indonesian test is on! If anyone has a good video camera that will do bass sounds justice it may be good to record it for Basschat posterity.
[/quote]

I'll happily bring my camera, in the right place it gives a decent representation

Link to comment
Share on other sites

I'm hoping to attend. I have a newish all-digital Markbass LMIII I could bring along for a comparison with an older or LMII model - to see if there really is a difference.

I've just put a couple of music-related books in the Recycling section for anyone attending the bash. Just message me and I'll reserve them and bring them along for you.

Edited by stevie
Link to comment
Share on other sites

[quote name='ern500evo' timestamp='1444835480' post='2886533']
Looking increasingly likely that I'm gonna have to bail on this. Gutted, am determined to get to a bash someday! Will keep trying to rearrange stuff but not looking good at present.
[/quote]

So, how many have we got coming then?

I will have to leave at 3-ish as I have to be in Axminster at 4, so if anyone would like to see the Multiamp in all its luvverly glory it'll need to be early on. Also, and rather disappointingly, I spoke with MSL yesterday and they still have not received their stock of the Nano 300 or the other new amp, the Ninja 1000 (the front panel even looks like an LM3 which has dropped some acid tabs!!). Hopefully sometime after 20th. As long as not needed elsewhere, given some notice I can usually borrow their demo kit anytime if anyone wants to see it...

Link to comment
Share on other sites

Thats this sunday!
Feck, i've got to pay closer attention!
From 12o/c?
Yep, can make that but got a gig to go to in Bristol later so wont be hanging about till the bitter end.
Will bring trace v4, barefaced vintage, stingray4, pedals & new toy squier vm jazz 5er.

Link to comment
Share on other sites

Hi everyone, although I can't make it I've arranged with Stevie for the Basschat 12" speakers to be there. Thanks to GrahamT for taking them across.

Here's where the design took place if you haven't been following it http://basschat.co.uk/topic/227904-1x12-cab-design-diary/page__st__420__p__2847253__hl__12%20beyma__fromsearch__1#entry2847253

Link to comment
Share on other sites

I hope everyone attending the bash will have a listen to these cabs as critically as possible. The next step is to voice them (as they say) and we'd like your input on this. I'll have a Markbass LMIII connected, and will be inviting you to adjust the tone controls to get as close to the sound you'd like from the finished cab. I'm going to try to bring some measuring gear if I can.

I'd also like to point out that I'm selling an Eden 15+horn speaker cab, a 1,000W power amp, some 12" speaker chassis, an electronic crossover and some outboard equalisers on the For Sales boards and would be happy to deliver any of these to the bash tomorrow.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...