Jump to content
Why become a member? ×

Jazz neck ski jump?


Chewie
 Share

Recommended Posts

Hello guys and gals.......
I've got a 1967 jazz which I have to set the strings a little higher than I'd like because there is a slight bend in the neck around the 14th 15th fret.
The truss rod works but at its maximum this bend is still there. I've taken the neck off and the truss rod nut and lubricated it but to no avail.
Do any of you cats know a vintage bass legend that could iron this bend out for me.....so to speak.......?
God bless,
By the way, I'm listening to Betty Davis alot latelly, Miles' wife back in the day. The band are absolutley smashing!

Edited by Chewie
Link to comment
Share on other sites

What Ped said.

The truss rod unless well out of kilter, won't have much bearing on that part of the neck. Assuming that the nut is ok and you have the correct relief in the neck, then it might well be fret wear. Quite often a graduated leveling is required down that end or it maybe as simple as just one or two slightly higher frets.

Link to comment
Share on other sites

Sounds like you've got what's known as a ski jump, sometimes a fret job will solve it if it's very minor and you've got plenty of fret material there. The other alternative would be removing the frets and levelling the board. Not a major job but not particularly desirable on a vintage bass.

Link to comment
Share on other sites

[quote name='Manton Customs' timestamp='1506853073' post='3381460']
Sounds like you've got what's known as a ski jump, sometimes a fret job will solve it if it's very minor and you've got plenty of fret material there. The other alternative would be removing the frets and levelling the board. Not a major job but not particularly desirable on a vintage bass.
[/quote] What do you guys charge for a "fret job".......?

Link to comment
Share on other sites

[quote name='gary mac' timestamp='1506850138' post='3381437']
What Ped said.

The truss rod unless well out of kilter, won't have much bearing on that part of the neck. Assuming that the nut is ok and you have the correct relief in the neck, then it might well be fret wear. Quite often a graduated leveling is required down that end or it maybe as simple as just one or two slightly higher frets.
[/quote]Thank you sir, Do you have anybody in mind that could perform such genius? I live in Swindon. Kind regards,

Link to comment
Share on other sites

[quote name='Chewie' timestamp='1506871637' post='3381649']
Thank you sir, Do you have anybody in mind that could perform such genius? I live in Swindon. Kind regards,
[/quote]

I don't know anyone in that neck of the woods, sorry.

Check out the pinned post about BC'ers willing to help out.

Link to comment
Share on other sites

[quote name='gary mac' timestamp='1506961403' post='3382341']
I don't know anyone in that neck of the woods, sorry.

Check out the pinned post about BC'ers willing to help out.
[/quote]Sorry Gary, where do I find these pinned posts? I'm a numpty on here....!

Link to comment
Share on other sites

[quote name='Manton Customs' timestamp='1506898268' post='3381920']
Around £70 if it's just a level, crown, polish and full setup that is required. Anything more than that would be difficult to quote for without seeing it.
[/quote]Cheers......... I've just noticed you're in Shropshire.......... I'm in Wiltshire......... Can you recommend anybody nearish to Swindon?

Link to comment
Share on other sites

Yes, hope you get it sorted. If you can't find a luthier who is local to you - it may be a bit of a trek to South Wales
But Dave Dearnaley is a very highly regarded luthier in this neck of the woods. Top bloke and a great craftsman, who also builds some really stunning acoustic instruments
I'm sure he could sort it for you - I know he likes restoring vintage, classic guitars and would enjoy the challenge too :)
Best of luck with it

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...
6 hours ago, GuyR said:

The hump around the 15th fret is quite common I understand from Martin at Bass Gallery. One of my 62s has it and, as it was only slight, a fret dress sorted it out. Good luck with it.

Cheers GuyR,

That's good to hear......  In a nice way........  Actually there was a Belgian guy on here telling me it is a tell tale sign of originality.  A bit like shrinking scratch plates...  Just more scary!!!

I took it to a guy in Bristol called Martin Bailey.........  he didn't think there was anything wrong with it and reckoned I had the relief too tight.....

I wonder if the position of the neck to the body might need a fart of adjustment?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...