krazy_olie Posted June 3, 2007 Share Posted June 3, 2007 (edited) I was thinking about splashing out on a cheap fretless bass, as fretless is something I want to be playing but I live off a student loan so big spending is not an option. However it occurred to me that I could just have my Ibanez GSR-200 defretted for what I imagine would be less money. Would anyone recommend for/against having this done. Are there any major disadvantages to having a defretted neck? I would go for a lined one anyway so that doesn't bother me How much would it cost? I could probably do it myself but I know I would just screw it up. Images of a hacked up fretboard spring to mind. Cheers Olie Edited June 3, 2007 by krazy_olie Quote Link to comment Share on other sites More sharing options...
gypsymoth Posted June 3, 2007 Share Posted June 3, 2007 I have asked this question myself, and it seems the only issue is the unsightly lines of whatever you use to fill the fret grooves with. it is supposed to be a fairly simple task that one could tackle at home, and another option is filing the existing frets smooth - which would require more patience than skill. Quote Link to comment Share on other sites More sharing options...
Paul Cooke Posted June 3, 2007 Share Posted June 3, 2007 here's a link [url="http://www.geocities.com/charlesarms/"]http://www.geocities.com/charlesarms/[/url] the one above appears to be competent... I'm pretty sure I found a professional one somewhere hosted by Bassplayer, but that one is refusing to load... there are one or two very scary "guides" out there... some with chisels being used to remove the frets... there is a sticky thread about it over at TalkBass ducks... wonder if we have one... hmmm we need one... perhaps this could be stickied? Quote Link to comment Share on other sites More sharing options...
ali-stare Posted June 3, 2007 Share Posted June 3, 2007 i did a pretty goood job on my old p bass copy but for my current bass i had it done by a pro cost me £70 which was not bad money cos he did an amazing job. if you do it yourself youve got to watch out for the neck bowing as the frets help keep it straight and when removed it tries to fill the gap where they were. Quote Link to comment Share on other sites More sharing options...
Kiwi Posted June 3, 2007 Share Posted June 3, 2007 Machines has defretted his Vintage bass and said it was easier than he thought it would be. Also have a look at this link: [url="http://www.geocities.com/charlesarms/"]http://www.geocities.com/charlesarms/[/url] Quote Link to comment Share on other sites More sharing options...
krazy_olie Posted June 3, 2007 Author Share Posted June 3, 2007 (edited) Thanks for the link. Think I will definately defret it just an issue of DIY or shelling out a bit of cash. The Bass Gallery site says £70, which is a lot more than doing it by myself but at least I'd be guaranteed of a pro job and it's still quite a bit cheaper than buying a new bass. Edited June 3, 2007 by krazy_olie Quote Link to comment Share on other sites More sharing options...
Machines Posted June 3, 2007 Share Posted June 3, 2007 It was a Yamaha RBX775 actually ! Defretting is indeed a piece of cake, making it a tidy affair however - is the hard bit. If you want it to look super neat and professional - i'd get a professional to do it. If you just want something to knock about and try out fretless - save the cash and do it yourself. Quote Link to comment Share on other sites More sharing options...
MB1 Posted June 3, 2007 Share Posted June 3, 2007 MB1. Make a balls of it and there goes any possible resale value. Quote Link to comment Share on other sites More sharing options...
krazy_olie Posted June 3, 2007 Author Share Posted June 3, 2007 To be honest I don't think it has much resale value anyway. Quote Link to comment Share on other sites More sharing options...
steve Posted June 4, 2007 Share Posted June 4, 2007 I'd say have a go and take your time, I did it to an old westone thunder II - and subsequently sold it on ebay for about £70 IIRC. As mentioned above, you need to fill in the fret gaps, I used strips of veneer from an antiques restoration supplier. They fitted the gaps perfectly. I used a soldering iron to warm the frets and melt the glue a bit and then gently lift them out with a set of pliers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.