Jump to content
Why become a member? ×

Sandberg Review


GM10
 Share

Recommended Posts

Well, I'm just back after some gig - Guadalajara (ska rock) from Austria was here in Kaunas, by the way..
Fun thing is, that I've seen this J/MM Sandberg for the first time today, and, bang, same evening a bassist uses 4string one on the stage!
It wasn't bad at all, sound, I mean - bass was ran through an Ampeg one, no compressor though, but then again, it was ok, maybe a lil more punchyness wanted..
I got a nice chat with bassist after the gig, he was pretty cool guy by the way, simply very easy to communicate with. So he told, as he doesn't like Fender ( he had few of them - J and P...) he wanted to try Sandberg, and it fitted for him veryyy much.
J/MM pickups are very versalite, he mentioned, there's just a bit of playing with bass eq, that's all.

All in all, if run'ed through good compressor, I think, that's a good one bassy thing.
I liked it, he liked it, so +2, eh? :)

Link to comment
Share on other sites

[quote name='David Nimrod' post='143409' date='Feb 19 2008, 09:52 PM']Sorry, but I've seen some really badly built Sandbergs (problems with the frets).[/quote]


I've only ever seen two Sandbergs and I own one. Both were spot on so I don't quite get the inconsistancy in quality control. In doing some research on Bass talk, the yanks absolutely rave about them. Read a number of threads and not yet found anything regarding any issues with the quality of build. Where as on Basschat there's been a few negatives?

Couldn't resist adding a little picy of mine.

[attachment=5761:New_Bass...c_07_008.jpg]

Link to comment
Share on other sites

[quote name='Gloria stits' post='143463' date='Feb 19 2008, 11:18 PM']I've only ever seen two Sandbergs and I own one. Both were spot on so I don't quite get the inconsistancy in quality control. In doing some research on Bass talk, the yanks absolutely rave about them. Read a number of threads and not yet found anything regarding any issues with the quality of build. Where as on Basschat there's been a few negatives?

Couldn't resist adding a little picy of mine.

[attachment=5761:New_Bass...c_07_008.jpg][/quote]
purdy! are you sure you don't want to start a porn thread? :)

Link to comment
Share on other sites

[quote name='Gloria stits' post='143463' date='Feb 19 2008, 11:18 PM']I've only ever seen two Sandbergs and I own one. Both were spot on so I don't quite get the inconsistancy in quality control. In doing some research on Bass talk, the yanks absolutely rave about them. Read a number of threads and not yet found anything regarding any issues with the quality of build. Where as on Basschat there's been a few negatives?[/quote]


They were at PMT in Birmingham.

Several Sandbergs had the slot for the fret tang cut a mm or so deeper than the fret tang itself, all down the neck... leaving a gap.

When I pointed this out to Dave Sheriff, who had been going on about 'custom shop quality' he was a bit downcast :huh: me too :)

I was thinking about one pretty seriously at the time. However, I've seen others that have looked and played beautifully, so who knows?

Link to comment
Share on other sites

  • 1 month later...

[quote name='Gloria stits' post='143463' date='Feb 19 2008, 11:18 PM']Where as on Basschat there's been a few negatives?[/quote]

The only dodgy ones I've seen were in the Bass Centre where a good few basses (of all makes) looked as if they'd been thrown around the shop as hard as possible (eg. knobs missing, several dings). That wasn't a build quality thing though.

I was initially tempted by a Sandberg California J/MM but now I'm leaning more towards a Clover with they Hybrid MM/J bridge pick-up. I'm also vaguely tempted by a 7-string Sandberg.

Link to comment
Share on other sites

I was in Electro Music in Doncaster where they have a good range of Sanbergs, Dave had just got a new one in and urged me to try it out, It was a black bass with matching headstock rosewood board with pearl blocks - sexy sexy !!

Pups were Musicman / Precision OMG how BIG did that sound ! Really well put together too, only thing that put me off was the big plastic Nut !! looked really cheap and out of place on such an instrument

Link to comment
Share on other sites

[quote name='Marcus' post='162497' date='Mar 24 2008, 06:38 AM']I was in Electro Music in Doncaster where they have a good range of Sanbergs, Dave had just got a new one in and urged me to try it out, It was a black bass with matching headstock rosewood board with pearl blocks - sexy sexy !!

Pups were Musicman / Precision OMG how BIG did that sound ! Really well put together too, only thing that put me off was the big plastic Nut !! looked really cheap and out of place on such an instrument[/quote]

Come on then, what did you walk out of EM with? :)

Link to comment
Share on other sites

[quote name='warwickhunt' post='162500' date='Mar 24 2008, 07:06 AM']Come on then, what did you walk out of EM with? :huh:[/quote]

Nothing at all...... can you believe it ?

Am I cured ? (I doubt it)

Am I skint ? (Isn't everyone)

Didn't Electro Music have anything in the Bass Dept (Actually a lot more than usual)

I did try the Mark Bass F1 through a MB cab and an SWR cab, one sounded average one sounded AWESOME !!!

I'll let you make your own mind up which was which !! :)

Link to comment
Share on other sites

  • 9 years later...

[quote name='David Nimrod' timestamp='1203457948' post='143409']
Sorry, but I've seen some really badly built Sandbergs (problems with the frets).
[/quote]

I really find that hard to believe, one thing people usually rave about is the frets being amazing AND they have some incredible fret levelling systems in place too.
Sandberg have to be one of the best finished basses I have ever seen.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...