amewse Posted March 9, 2013 Share Posted March 9, 2013 Here we have an original switch for a Kramer 450B from the late 1970s or early 1980s. I had a local engineer turn up a new switch tip in aluminium which is threaded and fits but needs final shaping as it needs to be a little more pointed. If you do not have access to a lathe, this could be achieved using a little emery cloth or fine file if the tip was mounted in a drill to spin it. The switch is the correct Switchcraft type and has its original flanged mounting bezel? I am looking for £20.00 for this switch. Thanks for looking. Angus. [IMG]http://i1353.photobucket.com/albums/q668/amewse/image_zpsd5710af8.jpg[/IMG] [IMG]http://i1353.photobucket.com/albums/q668/amewse/image_zps3ff5e2f1.jpg[/IMG] Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted March 10, 2013 Share Posted March 10, 2013 you should get the switch anodized after finishing the shaping too Link to comment Share on other sites More sharing options...
amewse Posted March 12, 2013 Author Share Posted March 12, 2013 Thanks, good advice. Link to comment Share on other sites More sharing options...
kiffer27 Posted March 29, 2014 Share Posted March 29, 2014 amewse.........I know this is a REALLY long shot, since it was a year ago that you posted this, but do you by any chance still have this switch for sale?? Cheers Kiffer Link to comment Share on other sites More sharing options...
amewse Posted April 19, 2014 Author Share Posted April 19, 2014 Hi Kiffer, yes, it is still available, sorry for the delay in my reply. Just let me know if you want it. Thanks, Angus. Link to comment Share on other sites More sharing options...
Recommended Posts