Jump to content
Why become a member? ×

Jazz Bass - Complete Ground Shielding kit, (anti interference).
£25


Recommended Posts

[font=Arial][font=Verdana][size=2][b][u][size=4]Jazz Bass - Complete Ground Shielding kit.[/size][/u][/b][/size][/font][/font]

[font=Arial][font=Verdana][size=2][b][u][size=4]As used on Fender USA Vintage Series & Custom Shop Jazz Bass[/size][/u].[/b][/size][/font][/font]

[size=4][font=Arial][font=Verdana][b]Brass Shield Plates for Neck Pickup, Bridge Pickup with Bridge Ground + Control Cavity Shield.[/b][/font][/font]
[font=Arial][font=Verdana][b]Fitted Black Waxed Cotton [font=Verdana]Ground wires, ready soldered.[/font][/b][/font][/font]

[font=Arial][font=Verdana]Fits into the body cavities under the pickups & the controls, to provide shielding from buzz, hum and electrical noise. [/font][/font]

[font=Arial][font=Verdana][font=Verdana]As used on FENDER USA Vintage[/font] Series '62 Jazz Bass + others.[/font][/font]

[font=Arial][font=Verdana]All plates are hand cut from Real Brass Sheet, (.020"), Pick up [font=Arial]c[/font]avity Shield Plates, supplied [font=Arial]w[/font]ith (0.4" thick) High Density Foam Rubber.[/font][/font][/size]

[size=4]Control cavity plate supplied drilled for fixing screws, self adhesive backing also supplied.

[font=Arial][font=Verdana]Pick up plates [font=Arial]f[/font]it underneath the pickup providing shielding from external electrical interference[font=Arial].[/font] [font=Arial]B[/font]lack waxed cloth covered wires soldered on, the other end of these wires is simply soldered to the pre-soldered area on the control cavity plate, [/font][/font]or can be terminated under the fixing [font=Arial][font=Verdana]screws provided. A wire [font=Arial]is fitted[/font] for connection to the Bell Plate lower fixing screw to complete the shielding circuit.[/font][/font]

[font=Arial][font=Verdana]The bridge has to be loosened so the extension can be fitted under the flange to make ground contact, then the bridge re-tightened. If a ground wire is already fitted under the bridge this can be left in place.[/font][/font]

[font=Arial][font=Verdana][font=Arial]The[/font][/font][/font][font=Arial][font=Verdana] black foam rubbe[font=Arial]r[/font]s st[font=Arial]i[/font]ck onto the top of the Pickup plates t[font=Arial]o[/font] serve as the pickup 'riser' when you loosen the four adjusting screws. [/font][/font]

[font=Arial][font=Verdana]Each kit is cut from sheet brass, machined, finished & wired by hand.[/font][/font] Some sharp edges are inevitable, normal caution advised when fitting.

[font=Arial][font=Verdana]Cost of the complete shielding kit is £25 + £2 1st class recorded postage.[/font][/font][/size]
[url="http://smg.photobucket.com/user/kjon51/media/Shielding%20kits/20130601_163414_zps22bed5d7.jpg.html"][/url]

[size=5][font=Arial][font=Verdana]Precision bass, P/J & special/custom kits available to order, please PM me for more info.[/font][/font][/size]

[size=4][font=Arial][font=Verdana]Cheerz, John[/font][/font][/size]

Edited by KiOgon
Link to comment
Share on other sites

  • 6 months later...
  • 2 months later...
  • 10 months later...
  • 1 year later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...