Jump to content
Why become a member? ×

new jack for IEM's


Recommended Posts

I have a pair of IEM's I use for running, they're not expensive ones and the jack has a dodgy connection and keeps cutting out the right one.
Anyone know how difficult they are to fix? There's three wires inside, I know this because I chopped the plug.
Any advice gratefully received.

Link to comment
Share on other sites

It may be the socket on whatever player you are using, so chopping the plug could have been a bad move. also possible that the bad connection is at the earpieces.
Put a new plug on and see how it goes. If you can solder small fine wires.

Link to comment
Share on other sites

It was definitely the plug, I tested it with different player's & when I moved the cable is when the cut out occurred.
I'm not too handy with a soldering iron so I'm going to see if I can find someone local to have a go. I only bought them in Feb, shame to chuck them away.

Link to comment
Share on other sites

you'll need to find someone who's very skilled with a soldering iron, the wires in the cables that i've dealt with have been hair fine and enamel coated so they're a pain to solder. but it is possible, go for a good quality replacement plug, i'm a fan of the Neutrik ones (the right angled 3.5mm stereo is my favorite as it has good cable strain relief and is solidly made.

Matt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...