Jump to content
Why become a member? ×

*SOLD* Precision P Bass Guitar Neck
£65


Recommended Posts

I just bought this off ebay (£74.99) for a project which is now in the *ahem* bin...

Perfect, unused condition, but now loaded with tuners. BUT - the neck is now pre-drilled so would need filling and re-drilling for your project. Also, a couple of tuner screws missing.

Any questions, ask away...

Ebay listing:
[color=#333333]We are now selling a range of beautifully finished Canadian Maple necks.[/color]
[color=#333333]This striking neck is finished in a Light Vintage Gloss and features black binding around the neck.[/color]
[color=#333333]Perfect to replace a broken or damaged guitar neck, to upgrade your existing guitar or to finish your current project.[/color] [list]
[*][size=3]Maple Fingerboard & Black Binding [/size]
[*][size=3]Fingerboard Radius - 9.5"[/size]
[*][size=3]20 Frets, Black Block Inlay[/size]
[*][size=3]Headstock Truss Rod adjustment[/size]
[*][size=3]Gloss Finish[/size]
[*][size=3]Colour - Light Vintage[/size]
[*][size=3]With skunk stripe[/size]
[/list]
[list]
[*]42mm Bone nut
[*]18mm Tuner holes
[*]Heel width 63.5mm (2.5 inch)
[*]Scale length 864mm
[*]Modern C Profile
[*]Approx Thickness at 1st F­­ret - 20.4mm
[*]Approx Thickness at 12th Fret - 23.1mm
[/list]

Edited by ShaunB
Link to comment
Share on other sites

They were fitted to a '62 replica p-bass (luthier-build) that I bought a while back - not realising the neck was going to go "banana" - so I'm not sure what they are, but I'm assuming they were a good set as the bass was valued at £800. They work as they should.

You can see 'em in situ: [font=Verdana][size=3]http://basschat.co.uk/topic/90374-steed-basses-build-thread/[/size][/font]

[font=Verdana][size=3]Hope that helps.[/size][/font]

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...