Jump to content
Why become a member? ×

Sold........Peavey SUB 15" PA speaker
£80


Recommended Posts

NOW ON EBAY........
I've had this cabinet about 4 years and used it only 3-4 times to add to an existing PA in larger than normal venues for the band(s). Works well as it has an onboard crossover, simply plug in to the amp output or chain off another speaker and it gives out low end volume to add to the 'top' speaker cabs.
[size=5]In very good condition with original packing box. Collect and test is always better but it works fine. [/size]
[size=5]Here is some online specs....[/size]


[indent=5]
[b][size=5]Features[/size][/b] [/indent][list]
[*][size=3]15" heavy-duty woofer with 2 3/8" voice coil and 50 oz. magnet[/size]
[*][size=3]Peak Power: 800 Watts[/size]
[*][size=3]RMS Power: 400 Watts[/size]
[*][size=3]Lightweight trapezoidal enclosure[/size]
[*][size=3]Durable, plastic, injection- molded enclosure[/size]
[*][size=3]Heavy duty steel grille[/size]
[*][size=3]Molded-in pole mount[/size]
[*][size=3]Top and bottom flying point inserts[/size]
[*][size=3]Weight Unpacked: 33.40 lb(15.15 kg)[/size]
[*][size=3]Weight Packed: 44.00 lb(19.958 kg)[/size]
[*][size=3]Width Packed: 19.37"(49.1998 cm)[/size]
[*][size=3]Height Packed: 29.75"(75.565 cm)[/size]
[*][size=3]Depth Packed: 24.37"(61.8998 cm)[/size]
[*][size=3]Frequency range (-10 dB, half space): 45 Hz to 3 kHz[/size]
[*][size=3]Sensitivity (1 Watt/1 meter): 97 d[/size]
[*][size=3]Transducer complement: Heavy-duty 15" woofer with 2 3/8" voice coil and 50 oz.magnet.[/size]
[*][size=3]Nominal impedance: 8 Ohm[/size]
[*][size=3]Input connections: Two 1/4" phone jacks in parallel[/size]
[*][size=3]Enclosure materials and finish: Injection-molded, 1/4" thick polypropylene with textured finish; dark gray color[/size]
[*]
[/list]

Edited by mybass
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...