Jump to content
Why become a member? ×

Aguilar TH500 distortion issues...


Conan
 Share

Recommended Posts

Having recently acquired one of these amps, I am happy with the "warmth" in the tone and the control over the midrange - both of these factors were important to me in choosing a new amp to replace my Hartke LH500 :)

However, I am having problems getting a truly clean (i.e. undistorted) sound from the amp. Even with the gain set on [i][b]zero[/b][/i] (and the drive fully off) there is some break-up! :huh:

Has anyone else experienced this? Is there a way around it?

There are no centre detents on the tone controls, but am I correct in assuming that they offer cut and boost, and therefore would be "flat" in the 12 o'clock position?

I'm confused... :mellow:

Edited by Conan
Link to comment
Share on other sites

[quote name='Highfox' timestamp='1426156850' post='2714964']
Edit to ask, what are you putting it through?
[/quote]
[quote name='discreet' timestamp='1426156934' post='2714966']
Which bass are you using?
[/quote]

Cab is a Barefaced Big One. I've tried the amp with three passive jazz basses - A CIJ Geddy Lee with EMG pickups, A J&D 1975 with Toneriders and a MIM Fender with the stock pickups. None of them are high-output basses...

If I was using a Spector I could understand! :D

Edited by Conan
Link to comment
Share on other sites

[quote name='Highfox' timestamp='1426158085' post='2714986']
I don't think it should be distorting that easy, it's not a crappy guitar lead in the chain or something like that?
[/quote]

Nope. I only use quality cables (OBBM at the moment).

[quote name='JamesBass' timestamp='1426159153' post='2714999']
Change cables, then if that doesn't work, engage the -10db pad and see how that effects it?
[/quote]

Tried that. It helps with the distortion, but the level is too low...

Link to comment
Share on other sites

[quote name='JTUK' timestamp='1426160698' post='2715024']
Have you or can you try it with another cab...
Some cabs are notoriously 'inefficient' and need a lot of driving
and it may be the amp hasn't the guts for it..??
[/quote]

That cab is fine with 500 watt heads in general - the amp shouldn't have an issue with it.

Edited by Mudpup
Link to comment
Share on other sites

[quote name='JTUK' timestamp='1426160698' post='2715024']
Have you or can you try it with another cab... Some cabs are notoriously 'inefficient' and need a lot of driving and it may be the amp hasn't the guts for it..??
[/quote]

There are other cabs I can try, yes. My cab never had any issues with my old Hartke, and it was fine with the TC RH750 I (briefly) owned.

Link to comment
Share on other sites

[quote name='Mudpup' timestamp='1426161347' post='2715037']
That cab is fine with 500 watt heads in general - the amp shouldn't have an issue with it.
[/quote]

Exactly. Barefaced cabs are very conservatively (i.e. realistically) rated. It's nominal impedance is 6 ohms, so its not as if it is drawing the maximum power from the amp anyway - 300/350 watts maybe.

Edited by Conan
Link to comment
Share on other sites

[quote name='Lozz196' timestamp='1426165968' post='2715117']
I have Drive on full, and Gain at 12 o`clock, and even then only get break-up when I hit the strings hard on my passive Precision.
[/quote]

Hmmmm. That's not what I wanted to hear... :(

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...