Jump to content
Why become a member? ×

Polish a satin finish?


dincz
 Share

Recommended Posts

[quote name='3below' timestamp='1427837760' post='2734988']
My Gibson SG chocolate brown was satin. I have used Briwax dark wax polish on it and it is now developing a nice (IMO) lustre rather like my Warwicks. I like it, is easy to keep looking nice.
[/quote]

+1 on Briwax
My Warwick Thumb was always done with Warwick Beeswax until few years ago when a local luthier with an excellent reputation was doing some electronic mods told me to use Briwax as it stops your hand sticking to back of the neck when sweating. The other big advantage is it allows the wood to breathe better than the beeswax and as mentioned by 3below it gives a really nice satin finish which is more natural on the bass. The bass doesn't have that greasy feel either just after polishing.

My Overwater (avator pic) i was told to use furniture polish like Pledge which seems to work well on this type of smooth satin finish. Haven't tried the briwax on it yet but might <_<

Dave

Edited by dmccombe7
Link to comment
Share on other sites

[quote name='dmccombe7' timestamp='1427898060' post='2735610']


+1 on Briwax
My Warwick Thumb was always done with Warwick Beeswax until few years ago when a local luthier with an excellent reputation was doing some electronic mods told me to use Briwax as it stops your hand sticking to back of the neck when sweating. The other big advantage is it allows the wood to breathe better than the beeswax and as mentioned by 3below it gives a really nice satin finish which is more natural on the bass. The bass doesn't have that greasy feel either just after polishing.

My Overwater (avator pic) i was told to use furniture polish like Pledge which seems to work well on this type of smooth satin finish. Haven't tried the briwax on it yet but might <_<

Dave
[/quote]

Pledge does bring the samll feature of making your bass totally impossible to spray with any kind of paint or lacquer at any time in the future. This is because the silicone in the spray will repel any spirit based finishes. You're not alone in advocating this approach, so each to their own. Good luck

Link to comment
Share on other sites

Don't smear goo all over it, it's not a sideboard! :lol:

If your bass has a modern poly finish (which if it's the Cort in your sig, it amost certainly has), then T-Cut (or similar paint polishing compound) will make it glossier than a very glossy thing.

Test a little bit in an inconspicuous area first, but I'm confident it'll give the effect you want. I've polished several satin-finish necks like this and you can get a factory, high-gloss finish. It is very labour-intensive though (and will possibly result in hand cramp!), but is worth it.

I use cotton wool make-up pads to apply & polish, and wipe off the residue with a clean, soft cotton rag.

Jon.

Link to comment
Share on other sites

[quote name='Grangur' timestamp='1427898466' post='2735619'] Pledge does bring the samll feature of making your bass totally impossible to spray with any kind of paint or lacquer at any time in the future. This is because the silicone in the spray will repel any spirit based finishes. You're not alone in advocating this approach, so each to their own. Good luck [/quote]

i wasn't aware of that ? Mmmm

Link to comment
Share on other sites

  • 3 weeks later...

[sup]You could use high grit wet sanding to polish it up then use cutting compound (t-cut and alternatives) to bring it up to it's final finish. Just like car bodywork.

Or get a power buffer and some cutting compound and go to town. I wouldn't attempt cutting compound alone by hand or you'll be there a long long time.[/sup]

[sup]The fact you've managed to polish it with the wear from your fingers should mean you can polish it with friction.[/sup]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...