kodiakblair Posted April 29, 2017 Share Posted April 29, 2017 I've stuck the Artec SE-2 in another bass but encounter a strange problem. The volume pot doesn't work, the bass plays and the blend works fine but I can't turn down the volume. Any ideas folks ? Wasn't the best solder joint on the volume ground, could that be the issue ? Cheers KB Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted April 29, 2017 Share Posted April 29, 2017 Might be be but I would of thought if it was a bad ground it would not work at all or be very crackly and intermittent I think it is a bad pot mate Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted April 29, 2017 Author Share Posted April 29, 2017 (edited) [quote name='Thunderbird' timestamp='1493492729' post='3288799'] Might be be but I would of thought if it was a bad ground it would not work at all or be very crackly and intermittent I think it is a bad pot mate [/quote] I think I'll take that a stage further an say the whole thing is shot Volume pot don't respond nor do either of the tone pots. Blend seems to be acting like a volume pot,roll it back and I'm getting almost zero volume. Go past the centre dent an I'm jumping to turn the amp down Edited April 29, 2017 by kodiakblair Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted April 29, 2017 Share Posted April 29, 2017 Send it back send it back lol Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted April 29, 2017 Author Share Posted April 29, 2017 Too late brother. 2nd bass it's been in Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.