gav4003

Just found this thread. Any info what the bridge pup is?

Got an old laney rbh800 head going into 2x 410 bass cabs loaded with h/h cabs. Got a custom done big muff clone by tt audio for a nice bit of growl and a rat clone for when you need to go that bit ott. Can't work out how to add photo of it. Been out of music and off this forum for years until recent

[quote name='spinynorman' post='1112762' date='Feb 2 2011, 07:23 PM']I had one of these, I think it's a great amp and actually I'm wondering if I was sensible to sell it. I used it with an Ashdown MAG 210T and an Ashdown MAG 115T. This worked really well and you can often pick these up pretty cheap on eBay or here. They're also light, which is something to think about if you don't have roadies. In terms of volume, I used both cabs on larger gigs, which gives you a 4ohm load, and never got the master volume beyond 10 o'clock. No problem being heard over a Marshall powered guitarist and drummer with a big kit. On smaller gigs and rehearsals I used whichever cab I felt like and never had problem with volume. I had the HA3500 with solid state and tube gain both set at about 12 o'clock. The main thing that put me off a 4x10 is having all that weight to lift in 1 cab. Also if you went for a Mag 4x10, it's rated 8ohms, so I guess you'd only be getting 250W out of it.[/quote] +1, Ashdown mag cabs for anyone on a budget (or not even) sound amazing, loads of handling, amazing tone, don't bust the bank balance, I ran my hartke 3500 through a 410 most of the time until I got the 810 version. Ashdown cabs are without a doubt the way forward. Never been a great fan of their heads though

[quote name='dougie' post='1161460' date='Mar 14 2011, 10:08 AM']if by chance the pots are the same as the MK111 ive so many im giving them away.......and knobs and eq sliders everything that isnt an output to be precise[/quote] Very good chance they are, with all the 'mark ...' heads they were basically the same parts from the mark iii on. If you have 4 pots I can get that would be amazing mate, thanks.

Got an old mark vi head today, works lovely but a couple of the pots are snapped off, can still turn with pliers but not overly convenient.Anyone reccomend somebody to replace them Bridgend/Cardiff area?

Favourite 2 are "lemmy uses 4 strings, you don't need more than that" and if you balls it up just keep playing, if anyone says anything it was the guitarist that went wrong"

If i'm not on shift or away I'l drop by, I'll bring my Ric 4003, all my other gear is pretty basic and beaten up.

And one living in sunny Bridgend