livingbasshead

I bought a GK NEO 410 off of Douglas. Was a swift transaction and a pleasure to do business with. Thanks!

Does anyone know where I can get a neck to fit the Squier Modified Bass VI? Can't find one anywhere! It's 30" scale, 'C' shape. Also used on the modified baritone jazzmaster.

Thought I'd share - £699, thats a great price [url="http://www.pmtonline.co.uk/ampeg-svt810e-bass-cabinet.html"]http://www.pmtonline.co.uk/ampeg-svt810e-bass-cabinet.html[/url]

I use these ones from Maplins with Van Damme XKE cable [url="http://www.maplin.co.uk/p/635mm-side-entry-mono-jack-plug-yl03d"]http://www.maplin.co.uk/p/635mm-side-entry-mono-jack-plug-yl03d[/url] I bought a load in bulk and have been making patch cables and selling them on ebay at different lengths (10cm, 15cm, 30cm, 50cm and 1m). If anyone is interested I can make custom sizes too. I stuck an advert up on the 'affiliates' page - 10% discount (i.e. 10% less than the ebay price). These little jacks in my opinion are just as good with regards to sound and are very low profile. [url="http://basschat.co.uk/topic/265016-custom-built-pedal-board-cables-pancake-jacks-and-van-damme-cable/"]http://basschat.co.uk/topic/265016-custom-built-pedal-board-cables-pancake-jacks-and-van-damme-cable/[/url] [sharedmedia=core:attachments:197715] pm me if you're interested

Thanks for replying. I have a newer phase 90 and don't have a problem with gain suck - but i thought i'd try a phase 100 as i wanted a bit more control over the intensity. At the weekend I replaced the switch back to a stomp switch, and changed one of the jack inputs (which was a bit dodgy) but still have the problem. I have a workaround that I can use my a patch on my BDDI deluxe with a higher gain, but I'd like to customise the MXR to increase the gain somehow - any suggestions welcome

I recently bought an old phase 100 and I have a problem that when I switch it on it sucks some gain out of my signal so the effected tone is lower output than the clean tone. Has anyone experienced this or know a way of tweaking it to address this problem? Its been modified with a flick switch at some time in the past but I don't imagine that would affect the resistance. Happy to post pics etc if anyone can suggest anything, thanks!