koval123

Up for sale goes a rare bird - Fender Precision Bass PLUS Deluxe, made in USA, Corona plant, in 1992 or 93. The short "Plus" series is considered to be a predecessor of the Deluxe series. It sports downsized ash body in a high-gloss clear finish, 22-fret maple neck with rosewood fretboard, Lace Sensor pickups and unique Philip Kubicki preamp. It's in a great shape and carries only very small signs of normal use. Neck is straight with truss rod working as it should, frets still have plenty (~95%) of life in them. Hi-mass Schaller bridge (with micro-tuners) and heavy-duty tuners, Schaller straplock pins (original US-market straplocks included). The only modification is a battery box installed within the cavity cover (no additional holes in the body). It comes with a new contemporary Fender Elite Series HSC (last piture in the listing) and the case candy i got with both the bass and the case. Sending within Europe possible, ask me for cost estimate. Price drop to GBP1200

You're more than welcome!

Hello, up for sale goes a nice NS-4CR Spector bass made in Czech Republic in SSD era (1993-99), shortly before Stuart Spector regained the Spector trademark. It features: Solid red gloss finish Solid Maple Wings 3pc Rock Maple Neck-Thru Body with Graphite Reinforcements Rosewood Fingerboard Abalone Dots Inlays EMG Pickups Original and rare Czech Made 9V Hazlab preamp version Solid Brass Bridge Schaller Strap Buttons Schaller M4 Tuners. Killer sound! The Czech Haz pre is the closest you will get to a Spector NS-2 tone. Very good condition, only one small paint chip (oval crack actually) by the bridge. Comes in a hardshell case. Trade possible for a John Suhr era Fender JB Deluxe.

This beauty is now sold. Thank you people for your kind words and support!

@therealting I took measurements and it's 4,4kg on a digital kitchen scales.

@therealting I'm already out for the weekend and will be back on Sunday evening, will check it then. As far as I remember it's a bit above 4kg.

Up for sale goes a nice made in Japan super-jazz Moon JJ. It has one of the most comfy necks I've ever played - one piece thin profile maple with ebony fretboard. Body is beautifully grained light ash covered with transparent finish. Bartolini pickups and pre-amp (TCT) allows for setting everything from Marcus Miller sound to modern glassy tops. Safe shipping in a tight-fit HSC possible, cost to be set individually.

Lovely! IMO that's the best feature this model has. Might take some time to adapt but once you do it soon becomes your favorite neck...

Nice indeed. Does it have a compound neck profile and fretboard radius?

Hi, are these Suhr pups?

Up for sale goes a rare bird - Fender Jazz Bass Plus, made in USA in 1993. The short Plus (there was also Precision Plus) series is considered to be a predecessor of the Deluxe series. It sports downsized alder body in a beautiful purple (sort of metallic) finish, maple neck with rosewood fretboard, Lace Sensor pickups and unique Philip Kubicki preamp with passive mode. It carries small signs of normal use and is in good overall condition. Neck is straight with truss rod working as it should, frets still have plenty of life in them. It is equipped with Hipshot downtuner, original tuner is also included. It comes with its original HSC which is beat-up on the outside but still provides relevant protection. Sending within Europe possible, ask me for cost estimate.

@JohnFitzgerald, @Volvito: thank you fine gentlemen for your kind words. I'm happy to know you're enjoying them Mayos 😎

@Peaty It's 4,3 kg / 9,6 lb It looks even better in close contact 😎

Up for grabs goes a nice 1987 Yamaha Motion MB-III bass made in Japan. It's in good condition with lots of small dinks, scratches and several hairline finish cracks. The finish itself was originally white but has aged beautifully to more ivorish. It sports two passive humbuckers (dual jazz singles in one housing), 24 frets neck with rosewood fretboard, alder or basswood body. Tuning machines and bridge (chrome-plated machined brass) were made by Gotoh. It's lightweight (3,3 kg / 7,3 lb) and compact thanks to 32" scale. Shipping within EU+ possible, ask me for cost estimate. More pictures to follow soon.

Up for grabs goes a very nice custom-ordered Mayones BE4. It's the BE4 (E for exotic woods) model that features bolt-on (6 bolts) construction, 5 pieces mahogany-maple comfortable neck on amazakoe (aka ovangkol) body in natural wood oil finish. Custom order was for the fretboard - here it's beautiful ebony with only side dot markers. It was made in 2007 and has the profiled/curved body profile much like in Spector or Warwick basses. Electronics is a factory-installed Bartolini JJ pups and 3 band Bartolini EQ (NTMB 918F). Outstanding build quality, great ergonomics and very little signs of use. Shipping within EU+ possible, ask me for cost estimate. Now with better pictures uploaded.