icecream

Just bought the kit from them myself, have levelled up my Hohner B2A, vast improvement. I would highly recommend Crimson, watch as many of Ben's videos as you can (he sometimes goes off on a tangent, but you learn stuff this way). Cheers, Garry

Many thanks to all. The bass is now redressed with all frets the same height. A very slight bit of relief, and all frets are now buzz free. A good clean and oil while everything was apart, now ready for action.

Nice one Andy. I guessed that from it's current state, just wanted to confirm before I smooth it down.

Hi, I have recently bought a headless B2A, which needs some fret work. Not too familiar with zero frets, but the majority seem to believe these should have some additional height, i.e. about normal nut height. Mine is actually at fret level - in fact slightly low with the wear. I feel certain it is the same fret wire as the othrr frets. Could anyone with one of these confirm the zero fret height? Many thanks.