Up for grabs is my EA Rig which consists EA Doubler Amp and 2x 1-12CLX Cabs...
The head is ideal for Double Bass,
The 1st cab is the newer version with 2 speakon connectors and is mint, comes with a padded cover.
The 2nd cab is an older version with 1 speakon and 1 jack connector has few marks but nothing bad, comes with a nylon cover (not padded)
looking for £850 for the complete rig .... or...... £500 for both cabs and ill keep the head
collection is 5 mins from M1 junction 25
CLX 1X12 CAB
Configuration: Coaxial 1 x 12"
Woofer:
Custom Kevlar 12"
Tweeter:
1" High Effciency Phenolic Compression Driver
Tweeter Level Control:
located on rear connection panel
Frequency Response:
38Hz to 14kHz
Sensitivity:
103dB @ 1m
Sound Pressure Level:
128dB @ 1m
Power Handling:
350 watts (continuous unclipped power)
Impedance:
8 ohm
Connection:
One Speakon Jack and
One quarter inch Jack
Size:
19"H x 17"W x 15"D
Weight:
44 lbs (20 kg)
Handle:
One integrated custom cup handle on each side
EA DOUBLER AMP
•Inputs: Configuration: 2 independent channels, Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass- Channel 2 has XLR input with phantom power
•Input Impedance: 1Meg ohm input impedance on both inputs
•Trim controls: Independent channel level adjustments, DI output level, and high pass filter
•Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2
•Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
•EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages (Channel 2 only) - Channel 2 also includes switchable Phantom Power, Variable Phase Control, and switchable Variable Notch Filter
•Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers
•Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4" stereo wired as TRS)
•Protection: Internal cooling fan, thermal and overload
•Line Voltage: 100/120 - 240 volts internally selected via jumper
•Frequency Response: 20Hz to 20kHz +/- 3dB
•Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms
•Size: 2.1"H x 10.5"W x 5.4"D
•Weight: 2.6 lbs