Groove65

ok feedback from last nights pub gig - ran the head with a 212 and a 210 on top (standard config) played at a smidge over 1pm on the master volume. sounded fine and some of the regulars in the audience said the bass cut through ok (one of the guys is a sound engineer by trade anyway) so im a happy chap. the only thing i would recommend is to either put the amp on some sort of foam / carpet if you're putting it on top of the stack to stop any vibration going into the amp from the speakers.. either that or just pop it on a side table..

im running one with a RS212 and a RS210 - sounds absolutely brilliant to me. loaded up the tube drive toneprint with no loss in volume. we have a LOUD drummer and 2 guitarists and a singer that belts out as well - was running at under half on the volume knob and it sounded so sweet with my Jazz/Status neck combo... didnt seem to be struggling at all will be gigging the setup on 17th so will report back after - im not expecting it to be lacking in cutting through the mic

+1 on the tapatalk plugin - i use the app quite a lot and would much prefer to use Basschat on tapatalk Cheers all

Lol one thing i noticed in practise tonight was the lack of treble in the setup - seems the 410XL on its own with the BH250 is very mids biased... wonder if its because the XL410 doesnt have a horn in it ? loving the BH250 though - played it at 1/2 power for 2 hours and it wasnt even getting warm !! and the inbuilt tuner is a really nice feature

brilliant news chaps and many thanks for that !! really makes my life easier... looks like i'll be on the lookout for a 2x12 soon

Hi all, just picked up a TC BH250 head (lovely little thing !) and ive got a Hartke XL410 to run it through. the question i have is the XL410 is a 8 ohm cab with 2 jacks - 1 input and 1 'extension' does anyone know if the 'extension' is a parallel output ? ideally i want to run a couple of 8 ohm cabs off the one speakon jack on the back of the BH250 head (yes its only got the one speaker output) to give me a nice 4 ohm load total. my concern is that plugging another 8 ohm cab into the 'extension' on the back of the hartke is just going to result in a 16 ohm series load... thoughts ?? infact, does anyone know how to get a parallel config if you only have 1 speaker out on the amp head ?