Jump to content
Why become a member? ×
Scammer alert: Offsite email MO. Click here to read more. ×

All Activity

This stream auto-updates

  1. Past hour
  2. Grab yourself a lot of amp for very little cash. Comes complete with the foot controller and in a generic Gator gig bag that does the job Goodcondition revelled with JJ preamp valves. price includes UK postage here’s the blurb / tech bits The Genz Benz Shuttle Max 9.2 is a highly versatile, lightweight (around 3.75-6.75 lbs) bass amplifier head known for its dual-channel preamp (clean FET & tube-driven), powerful Class D output (900W @ 4 Ohms), and advanced tone-shaping, featuring a 4-band EQ with parametric mids, global filters, and foot-switchable blending for massive headroom and classic to modern bass tones. Key Features Dual Preamp: Offers a clean, pristine FET channel and a warmer, grit-capable tube (12AX7) channel, blendable via footswitch. Powerful Class D: Provides 900 watts at 4 ohms (500W at 8 ohms) with Genz Benz's 3DPM™ for solid output and articulation. Advanced EQ: Each channel has 4-band EQ with dual parametric mids, plus global signal-shaping filters for detailed tone control. Lightweight Design: Ultra-portable for gigging bassists. Versatile Tone: From bright and airy to dark and overdriven, it's a top-tier, adaptable amp. Why It's Popular Versatility: The two distinct channels allow for a wide sonic palette, from pristine cleans to gritty overdrive. Power & Portability: Delivers substantial power in a compact, easy-to-carry package, a hallmark of the Shuttle series. Tone Shaping: The extensive EQ and filters give bassists immense control over their sound. In essence, the Shuttle Max 9.2 is a legendary amp for players seeking maximum tonal flexibility, power, and portability in one lightweight head.
  3. This is already a bargain - I paid £165 for mine second-hand and was glad to find one at that price.
  4. Not really playing this so up for sale again 👍
  5. Found some further spec on the head Power Output: 200W RMS Power Requirement: 230/115/100 V Frequency response: -3dB at 35Hz and 14 kHz Speaker Outputs: Speakon/Jack High Instrument Output: Impedance 1m Ohms, input range 25mV - 1.5V p-p Low Instrument Input: Impedance 100k Ohms, input range 25mV - 6V p-p Line Input: Impedance 100k Ohms, input level 0dBu nominal DI Output: 600 Ohms balanced, level 0dBu nominal Speaker Outputs: 1/4" jack connectors for 4 and 8 ohm speaker cab configurations. Effects Send: 1k Ohms, level 0dBu nominal Effects Return: 1M Ohms, input level 0dBu Nominal Pre-Amp Tubes: 1 x ECC83 1 x ECC82 Output Tubes: 1 x ECC83 4 x 6550 EQ: Fully Passive Middle, Bass, Treble, Mid Shift, Bass Shift, Bright Mute: Mute the output of the amplifier (useful when tuning) VU Meter: Visual indication of the output level of the LB-30
  6. Following with interest.
  7. Bowling For Soup - Father Christmas The Hives & Cindi Lauper - A Christmas Duel Bad Religion - O Come All Ye Faithful Vince Guaraldi Trio - Christmas Time Is Here
  8. Just a post in praise of the TI JR. Obv, not to your taste, and that is cool. But if anyone out there likes a nice, compliant string that is a bit (tiny bit) rubbery/bendy, then this is the set you are seeking.
  9. Few bits and bobs need to go the fund my GAS. im way back home tomorrow so will post pics All prices include UK postage Source Audio Atlas Compressor £135 Mint Boxed EBS Multi Chorus Used but working perfectly £35 Korg Mini Pitck Black Tuner Mint boxed £25 Pedal Train Nano Plus with Bag Godd condition coupler if holes drilled £25 T Rex Fuel Tank Fair condition 100 % working £45 Bindle of assorted patch and DC power leads £12.50 Or Take the lot for £210
  10. A Merry Jingle - The Greedies (which were a “supergroup” made up from Thin Lizzy & The Sex Pistols)
  11. Not a Christmas song per se, but the full piano version of Merry Christmas Mr. Lawrence by Ryūichi Sakamoto himself is a delight for the ears, and you can add the sung version from David Sylvian called Forbidden Colours.
  12. Backdoor Santa - Clarence Carter Silent Night - Bootsy Collins Christmas with the Devil - Spinal Tap
  13. Song suggestions please for a Christmas Playlist. Songs suitable for general listening but which avoid the bleedin' obvious! I'll add them to this Spotify playlist (and maybe change the cover art)
  14. I have the following for sale. To sell as a job lot would be lovely, but I am happy to break up into smaller batches too of course. Postage will be added and calculated according to items purchase, but if you buy the lot I will cover it. All jacks have been used but are in full working order: 5 x KMMK SP400 right angle square 1/4" TS jack plugs - SOLD 8 x KMMK SPS connectors (7 size 5, 1 size 4) 1/4" TS jack plugs, ultra low profile - £5 each 2 x Neutrik right angle 1/4" TS jack plugs - £3 each Made up cables: 1 x 1/4" to 1/4" TS jack cable, 28cm of Van Damme XKE cable, Rean jacks - £5 1 x 1/4" right angle to 1/4" straight jack TRS cable, 45cm of Van Damme XKE cable, Rean jacks - £6 1 x 1/4" right angle to 1/4" right angle jack TS cable, 30cm of Van Damme XKE cable, Neutrik jacks - £8 2 x 1/4" TRS to 1/4" TRS jack cables, 40cm of Lynx Custom Cable, Creation jacks - £12 each 1 x Roland RCC-10-TRTR Interconnect Cable, 10ft/3m balanced - unused - £12 Cable: Van Damme Tour Grade XKE Mic Cable (red) 4 x 1m length - £2 each 1 x 3.75m length - £6 The right angle jacks in this picture have sold.
  15. I built a small pedal board around the Bassrig 15 for my 80s - 90s cover band.
  16. Spot on. Danny and Fil at Wings of Pegasus deserve our support. Edited to add: I just watched Mohini D's response video through and it was a cringe-fest. The good news was that she copped a lot of grief in the comments.
  17. I think the thing I like about Danny is beyond the brash Yorkshire humour is a genuine love for music. I do enjoy his deep dives into some of the ridiculous stuff that’s happening in the music industry, glad someone’s talking about it and not dancing around the subject.
  18. That does look good... Very tempting.... Spent an hour before torrential rain hit (again) Glue front and back panel Route the edges so there's a nice curve Nice 6mm routing bit makes this dead easy (as previously suggested) Solder speaker wire to the speaker Fill and sand any problems. Paint front baffle matt black. Take off side handles and rear speakon panel, and paint the wood matt black. I'll mask this area off before the Armacab goes on. Assemble, check all OK Check it all works. Wait for warm weather to do the Armacab. - July 2027?
  19. The bit in the earlier video when the nauseating couple were banging on about moving to LA and being in the Tesla and waving some toxic energy drink around was truly horrendous. Sadly, this is the dreadful world that social media has brought us to, and these parasites will grow undeservedly rich from it.
  20. It's 10lbs, there or there abouts. Balances really well and feels proper solid.
  21. Thanks Kodiak I will give them a look. In the mean time I located the template on the useful things shelf in the garage and used the router to cut the rough shape of the inner body block. There is still lots of tidying up on the front and back to get the shape flat enough plus I need to remove excess glue from the initial glue up of the blank. I now need to order the walnut top and some light coloured veneer for laminating. The back is coming out of a nice pice of hard wood shelving that I rescued from a local skip, not sure quite what the wood is but it is a nice deep red colour with a pleasing grain and very hard, so perfect for fending off belt buckle rash. Hopefully I can get that planed down to the required thickness and sanded over the festive break.
  22. Here's the grille I've got - perforated aluminium sheet, 10mm holes, with the speaker on top to give a good idea of scale.
  1. Load more activity
×
×
  • Create New...