Jump to content
Why become a member? ×

Leaderboard

Popular Content

Showing content with the highest reputation on 22/06/18 in all areas

  1. Wow. No biggie, I recognise your tone from some of the "sales assistants" in multiple shops that ultimately went bust due to lack of customer loyalty as a result of awful customer service😁
    9 points
  2. I can do shiny and new. You want old school? I can do old school. You want etched & engraved? I can do etched & engraved. You want figured maple? I can do figured maple. You want 3D finish? I can do 3D finish. You want customised rarity? I can do customised rarity. You want barking mad silliness? I can do barking mad silliness. You want more photos? http://s1128.photobucket.com/user/h4ppyjack/library/Basses CURRENT/AliKat Double Bass 2018
    4 points
  3. That's a fine suggestion. * 'Real singers don't use music stands' * 'Don't we usually do this in G?' * 'Have I passed the audition?' * 'You don't need a full Marshall stack in a pub' * 'There's no money above the fifth fret' * 'I didn't have time to learn this one' * 'No, it's not a "big guitar" ' * 'You can have a go on my bass if I can have a go on your girlfriend'.
    4 points
  4. Glad to hear he hasn't besmirched the good ped name
    4 points
  5. I don’t have it yet, but I can’t help posting the finished pictures!! 😍 Should have it next week I think! Specs you can’t see, dual coils with a East Uni-Pre. Si
    3 points
  6. I'll be ordering one of these tomorrow (hang the expense..!) if this is what is delivered..!
    3 points
  7. Sorry, we're fresh out. We've plenty of scatology, though; will that do..?
    3 points
  8. I'm going to be seeking a finders fee for owning the pig that started all this, just saying...
    3 points
  9. Anyone visiting Bass Direct is a serious potential buyer. I would like to bet that they get almost no casual 'walk-ins'. I've spent time at the retail 'coal face' and have to agree with mrtcat (and therefore disagree with FDC484950) that if they want a long term future they should/must pay attention to making the customer feel good about the purchase. I travel on Ryanair by necessity not choice - even Michael O'Leary, about whom it has been said that he is capable of starting an argument even when in a room on his own, has realised that a business has to give the customer the 'warm fuzzies' as my kiwi mate calls it. I am not saying that Bass Direct is as bad as Ryanair btw - far from it, but they need to up their game in that department
    3 points
  10. Yes, that is the attitude that a lot of music shops had when I was young many years ago, and why no-one was that worried when a lot of them closed down.
    3 points
  11. Because I'm swaying more to playing 5 string instead of 4 I thought I'd convert my '72 ish P bass onto a 5 string I have seen people doing this but keeping the 4 string neck and changing the nut and bridge, but to be honest I don't think I would be able to get on with the tight string spacing so I think I will get a 5 string neck and rout out the neck pocket and change it that way I'm still not 100% sure whether it's going to be a Tele or a Precision I'm leaning more toward a Tele but that could change? But here's the donor bass
    2 points
  12. This is 27 years old but has recently been completely refurbished/refinished and refretted, consequently it’s in mint condition. The refinish was done by Sims guitars in Kent, they’ve done a truly fantastic job. It features a thuya root face and back with an ash core. The neck is wenge and maple with a 24 fret ebony fretboard which has a very thin band of lighter wood purfling running along the edge. It’s 34” scale length with twin Kent Armstrong humbucking pickups and a Bartolini preamp. The bass is amazingly easy and comfortable to play, and very lightweight. The string spacing is about 18mm at the bridge. I would prefer collection from Birmingham, or I can deliver for train fare. The instrument comes with a Hiscox case. Trades welcome for cheaper 6 string basses plus cash my way. I particularly like the headless thing, so maybe Status?
    2 points
  13. SOLD - Thanks for all the interest! Hello all, I've decided to put my fretless up for sale. It's an Adamovic Jupiter 4, fretless, made by Nikola Adamovic in Holland. This is an amazing instrument but it's leaving the family to free up some room for a 6 string fretless. A quick run down of the specs below: 4 string 34" scale Flamed redwood top and headstock cap Limba body Spalted maple lined freboard and nut Flamed maple and purpleheart neck Glockenklang 3 band preamp, knobs are volume, pickup pan (there are two pickups under the ramp), treble, bass and mid. I can't remember what all the little switches do, one is a killswitch, I think the other changes mid-freqs adjusted by the mid knob and the other is a phase knob but I'm not 100% certain. Overall the bass is in great condition, it has a few marks in the finish from aging that I've tried to capture in the photos but it has been looked after by the previous owners and there are no big chips or dings in the finish. The fretboard is in great condition, the action is nice and low as I had it set up by Curvy Sounds in Newcastle not long after I bought it. The preamp is nice and flexible, I'd say it leans towards the classic fretless sound more than the modern super bright fretless sound. It's fat and warm but the mids can be boosted for more attack or for playing "Portrait of Tracey" on repeat. Every time I play it I think it's an amazing bass but I yearn for 6 strings, if this bass was a 5 or 6 I'd keep it until the grave but alas, it's a 4 so it's disposable to me. Despite it's appearance the bass is very small and incredibly light.My bathroom scales think it's 2.3kb / 5lbs and I'd say that's about right. It's a featherweight but it's incredibly resonant and loud when not plugged in, it balances perfectly on a strap, as should be expected as Nikola's philosophy when making his designs was "ergonomics first". I had a look on his website and with his 2018 price list and this would have cost in excess of 4500 euros to be built today. With regards to payment I can do Paypal or cash on collection. I can drive to meet or deliver as long as it's not too far from Newcastle. I travel for work and spend a lot of time around Europe so I'll do my best to answer any questions asap. I'm happy to PM my number to discuss the bass on the phone provided I'm not working outside of Europe zone 1. THe bass will be shipped in a hard case, shipping would be £30 within the UK. International buyers, PM for a price. I'd be interested trades, PM me if you're interested, I'll consider anything. Cheers, Dave
    2 points
  14. Who said 'Half-pint'..? Come on, own up... You're not leaving until the culprit is found. I don't mind; I've got all the time in the world... ... ...
    2 points
  15. Pint held purely for scale 😁
    2 points
  16. I'm sure I'll survive and sorry for the thread hijack @Christine
    2 points
  17. They were a cracking little band though. Such pointy hairstyles, no wonder you bled.
    2 points
  18. That sense of pride you feel when you have made a minor purchasing error, but manage to cover that up using existing parts and you are confident that noone will notice the error..
    2 points
  19. Today I screwed up again, nothing major but a silly mistake, I forgot to rout the neck binding rebate before radiusing ah well have to do it another way tomorrow, still not the end of the world just a waste of time So as you may have guessed I radiused the Ebano fretboard, first though I shaped the neck using a jig that fits into the truss rod slot, then in my hurry to radius the fretboard I did that and then shaped it instead of shaping, routing then radiusing. After all that i glued in the Mother of Pearl and sanded them down to 320 grit for now until I fir the binding and clean it up then I can sand down to 3000 grit and see how we look after that; any finer and I'm off shopping again! The inlays were a good fit, I needed to press them in using a vice (linoleum jaw linings) but the fit was good, just that tiny nick to fill, I'm very pleased with that job, lets see how I get on with the headstock inlays hopefully next week. The inlays for the other neck arrived today, so I will get them sorted tomorrow with luck.
    2 points
  20. Just traded my pride and joy bass for 10 years with Mike. Excellent guy in every aspect, especially as trading is very much down to trust. Mike receives my highest regards as a great member of Basschat. Buy/sell/trade with Mike without any hesitations!
    2 points
  21. Just came across this and was very surprised and saddened to hear of your experience with us. Was it me personally you were dealing with? I can't recall this exchange you're referring to, although that doesn't mean it didn't happen. I do try to help all my customers with any questions or service needs they may have with our products in a very timely manner. In the case of your 6" midrange driver, there have been other customers with the same question or curiosity as to whether or not it was working due to the fact that the high frequency content of a bass guitar is very low in output relative to the lower frequencies. My response for testing this was to play full- range, pre-recorded music thru the speaker to see if the output was consistent with the recording. In all cases, it eliminated any concerns the customer had regarding the 6" driver. I do take great pride in our customer support and service, and expect no less from our dealers. This, of course, doesn't excuse any poor communication on my part, and I am very sorry if it was me personally you were corresponding with. Best Regards, Jim Bergantino
    2 points
  22. What an amazing looking instrument and wife
    2 points
  23. "...after several days' exchange of evidence, EHX's lawyer summed up her case for the prosciutto. The judge then allowed the jerky to retire, giving them 12 hours to come to a unanimous brisket."
    2 points
  24. You're welcome, what we're here for right? And I'm with you in wanting to give the Helix (HX in my case) offerings some serious further consideration. I agree that there has been a LOT of very helpful and considered comments on this thread (as well as more porcine stuff and the left field prospect of budding marketing careers being launched).
    2 points
  25. Will happily consult on the design of a bass wah... I have already thought of the silly name for it. Perhaps a picture of a pig wearing a beret with a string of onions round it's neck would go well on the design? An auto-wah version could be a "pork wah? Sausage machine" Why aren't I in marketing?! This is gold dust!
    2 points
  26. Yes...but it’s an MM Jazz body. I didn’t have my ruler handy in 1999 to measure pickup placement thus ensuring I didn’t look so silly in 2018 🙄😉
    2 points
  27. Yeah but its not a Jazz Bass in the true sense. When was the last time you saw a Fender Jazz with a Stingray pickup in that position.? How is it going to sound like a P Bass (under that pickup cover) in that position anyway.? Im just saying for Fender its a bit Leftfield. There are only so many things you can do with an Electric Bass, radically new bass design is just a pipe dream when it comes to an instrument like the bass, its all been done imo. The last radical design on the bass was a Dingwall. but since then its just minor tweaks.. I do wonder if on some Piano forum there are people moaning because makers aren't doing something radically different or groundbreaking with the piano.. ?
    2 points
  28. Don’t get it: why is @mrtcat wrong? Poor customer service is bad PR, regardless of the customer’s intention.
    2 points
  29. They know and recognise me as someone who has spent a lot in there over the years, probably £5k to date and I've also sold stuff to staff. It was reasonably busy but it's not a customer's job to convince a shop and it's staff that they're worthy of being welcome. Everyone is a potential customer when you are running a business whether they spend today, tomorrow or years down the line. If they're having a bad day then they need to be professional and suck it up a bit like the rest of us in our professional lives.
    2 points
  30. Fender Precision Bass Deluxe USA Nice Fender five string P deluxe in a delightful cherryburst finish. P deluxe V basses seem to be fairly rare now. These are very versatile basses with a lot of great sound possibilities, which cover a lot of styles. I wouldnt compare this bass to a standard passive precision. The body has some nice grain to it. The fretboard is made from pao ferro which looks awesome. Its smooth and shiny. The serial number dates this bass to 2005, though the neck is dated early 2006. So its got the anniversary label on the back of the headstock. It's defenitely not a heavy weight champion. I did weigh the bass on my kitchen scale, which says it weighs about 4.1kg! Some pictures: As you can see on the pictures, a (original replacement) black pickguard is fitted. The original pearl pickguard is included in the sale. The bass is in good used shape, with only light user marks (scratching on the back). It still looks and feels very fresh. Elixir strings have been fitted. I got this bass in a trade a while ago, as I did want to try a fiver again after a few years. I think its an awesome sounding allrounder, but I still dont like to play fivers it seems... A Fender molded hardshell case is included in the sale Now £1.100 with fender molded hardcase, or £1.050 without. Trades/partial trades are certainly welcome! I like traditionally styled basses, 4 strings only. I would especially like a vintage lightweight precision (could add some money) from the early 70s or late 60s per example, or a vintage mustang bass... Otherwise; surprise me!! The bass is located in the Netherlands. I am willing to ship within the EU (includes UK) at buyers risk and expense. Costs will be about 60gbp with neck attached or 30gbp with neck seperated. Price is firm. I wont include shipping in the price.
    1 point
  31. Not according to Reverb which lists some that have sold for as little as 650 and many around the 1000-1200 range... https://reverb.com/uk/price-guide/guide/15172-moog-taurus-i-1970s-black
    1 point
  32. Hey Tim,pretty sure they use 45to100 sets.i asked the same question
    1 point
  33. Neck carving is the best bit, and over too soon
    1 point
  34. I have to ask; how much was postage from SA?!? It’s obviously good for metal, right?
    1 point
  35. The fingerboard is really quite red, rather than purple. It reminds me strongly of Cedar of Lebanon though I doubt that is what it is. The invoice & spec states that it is Rosewood, but I don't believe that for a minute. Apart from anything else, that would have fallen foul of CITES, Shirley. As to "brushed aluminium", I say to you "Pah!", and again "Pah!", and thricely "Pah!". This is hologrammatically etched 3D aluminium I'll have you know, My Good Man.
    1 point
  36. I'm moving on my Phil Jones Bass Cub as it's no longer needed now I'm selling my double bass. It's the black version, in excellent condition, comes with the carry bag, and has recently been PAT tested. £360 collected or can post.
    1 point
  37. On my way to the Isle of Wight Festival for the day, should be a blast
    1 point
  38. We're having a Skype meeting with Mr Chown this weekend. I'll bear it in mind. Remember where you read it first. I'll grant licence for the usual fee.
    1 point
  39. I'm sure a new one still does. This one came with the Hiscox case shown in the photo. I bought the MM case for my SR4 but thought I'd give the buyer case options and priced accordingly - some buyers dont want hard cases at all.
    1 point
  40. Definitely not, upheld it throughout !!!!!!!!!!!
    1 point
  41. Yes, those of us who are no longer 'prime cuts' are more likely to make a pig's ear of things.
    1 point
  42. As long as your drummer uses 7A sticks you’re fine with your class d amp.
    1 point
  43. If i get it in a skoda fabia, i am sure an A4 will be no problem.
    1 point
  44. I hear good things about bamboo laminates. Also, @Christine is considering using Rocklite for the fingerboard on a build. The two together ought to earn some eco-geek points.
    1 point
  45. I just dropped a blob on each spot. I’ll block sand it tomorrow at “chateau Peugeot “ and do another really thick coat at lunchtime hopefully next week’s fine weather will give a painting day
    1 point
  46. Two too many knobs? It's supposedly like a Stingray - one knob for volume and two for active EQ. It's as simple as you can get for an active bass.
    1 point
  47. Failed promises?
    1 point
  48. At least you can get him to make you another one!
    1 point
×
×
  • Create New...