Leaderboard

*£875 posted* Hand made in small numbers in Japan, these basses really are a joy. The 24 fret Maple neck features block inlays with Luminlay side dots, stainless steel frets and classic style Gotoh tuners. The Ash body is scaled down with an ample cutaway allowing access to the dusty end, this results in it being super light at 3.7kg/8.1lb. The controls are Volume, Volume, Tone with a series/parallel switch to fatten up the sound when required. It features a Gotoh bridge and the latest Atelier Z pickups with staggered pole pieces. It's in fantastic condition and comes with an Atelier Z gig bag which unfortunately has a broken zip (may be fixable?). I've added a picture of the top of the headstock which highlights the only imperfection.

1982 Ibanez Blazer for sale, spares or repairs. All original, electrics work fine. Looks it's age and cool for it in a genuinely roadworn way. The issue is the neck. It has a forward bow that I just can't get straight with the truss rod even with 2 washers added which is a real shame as it sounds epic with the Super P4 pickup. Try as I might I just can't get the action lower than 4mm at the 12th fret due to the curve. The neck isn't twisted by the way. Selling as spares/repairs just to be clear. If you can fix it with skills I don't possess then great. If the neck is a goner then I reckon the remaining parts are worth the asking price to be fair. I'll post with the neck detached to make packing and shipping easier and cheaper. The strings are not included as they are brand new TI flats that will be going on my next bass. You're welcome to come and have a look in advance if you are in or near the Cardiff area. £150 with postage being £12 extra Cheers.

NOW SOLD £1300 £1200 Sadly having to sell this wonderful bass as it does not get the use it deserves…. I think I bought It back in 2011 from Bass Direct, it has a few scars on it, 2 major ones are some wear by the neck pickup and a dent by the volume pot [both pictured] Comes with original gigbag I am based in Bristol and am happy to drive to meet depending on the distance, also happy to get it couriered at the expense of the buyer. Any questions please don’t hesitate to ask

VGC, comes complete with Fender Quick locks, P/U covers and Fender gig bag. Just over the 4 kilo mark, in weight. Here’s the official blurb: The Fender FSR 60's Jazz Bass is a really cool, limited edition Jazz bass in a Walnut finish. The Ash body is bright, and always features an interesting woodgrain and the pickups and sounds you'll get from this bass are exactly what everyone loves about the Jazz bass. Punchy, but controlled sounds with the ability to control each pickup individually or blend the 2 together, allowing you to cut through the mix by only using the bridge pickup or fatten the low-end by running both at once. The Slim C neck is comfortable to play and features a round feeling 7.25" fretboard radius making it very easy to move around the neck. Japanese Build Quality The almost unthought about member of the Fender factories, Fender Japan release some amazing guitars that some even say are just as good if not better than their American counterparts. Made in small numbers purely for sale in Japan these guitars are rarely seen outside of their home country except in these small FSR runs. Specifications Model Name: Classic 60S Jazz Bass Walnut, Rosewood Fingerboard Model Number: 5250151922 Color: Walnut Body Shape: Jazz Bass Body Material: Ash Body Finish: Polyester Neck Neck Material: Maple Neck Shape: Slim "C" Scale Length: 34 "(864 Mm) Fingerboard Radius: 7.25" (184.1 Mm) Number Of Frets: 20 Fret Size: Vintage-Style String Nut: Synthetic Bone Nut Width: 1.5 "(38.1 Mm) Neck Plate: 4-Bolt Neck Finish : Polyester Position Inlays: White Dot Controls: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup) Pickup Switching: None Pickup Configuration: SS Bridge: 4-Saddle Vintage-Style Tuning Machines: Vintage- Style Orientation: Right-Hand Pickguard: 1-Ply Black Control Knobs: Vintage Style Black Plastic Jazz Bass Collection preferred, or could possibly meet half way within reason. Can ship, at your risk / expense. No trades, please.

Lovely Squier Bronco Bass in red, purchased from Big County's Scott Whitley. This bass benefits from some lovely flame on the neck and headstock. it's in very good condition with only a couple of very slight marks. The grey square thing on the scratchplate is a stick on furniture carpet protector from B&Q which I use as a thumb rest. Happy to remove before sale if required. There's a scratch on volume knob. The bass benefits from the following mods: High Mass Bridge Artec Blade style pickup The original bridge and pickup will be included. Based in Milton Keynes. Postage available at buyers risk and cost. No case available but I have packing materials. £125 firm.

For sale or trade mayones ellegance, Easy to play and a clear sound, Body: American Ash Wenge middle Top: Flamed Maple Neck heel: Special contoured for easy upper frets access Neck-thru-body Scale: 34.25" (870 mm) Neck: 9-ply / Maple-Mahogany Weight: 4.4kg Radius: 20" (508 mm) Fingerboard: Hard Rock Maple Truss rod: Double action truss rod Frets: 24 jumbo Nut: Ebony nut Pickups PB-H / Bartolini PrecissionBass (neck) + Soapbar (bridge) pickups Bartolini H.R 4.6. active preamp Control: 1 × Volume, 1 × Balance, 1 × Middle (push-pull for mid range selection), 1 × Treble/Bass Bridge: Mayones X2 two-piece string spacing: 18 mm Tuners: Schaller M4 Separate 9V battery compartment(-s) Hardware colour: Black (BLK) case: Mayones Hiscox Bass Hardcase https://m.facebook.com/story.php?story_fbid=10218877734437285&id=1319896227

If I didn't already have a long-neglected Blazer project (the original Mk 1 with the big single-coil pickup) I'd be on it like a Shakespearean sonnet. Or something. GLWTS!

The square B&Q thing looks like a button... was hoping it activated some kind of transformer type transformation into maybe an actual mechanical Bronco. Your 'furniture square' has disappointed sir... and frankly put me right off, had it have transformed, I would be a buyer right away! 😁

Compact, rugged, Boss OC-2 clone which does the whole OC-2 tone really well! In very good condition (home use only), under a year old and I have owned from new. Oh and it's also a fraction of the cost and size of an OC-2 Price includes UK P&P.

Meet Veronica. She's a Japanese JB62 made for the export market with some upgrades. She's from 2007/8 and bears the 'Crafted in Japan' label. She benefits from the following alterations: Wizard 84 Pickups Badass II Bridge Vintage Style Tuners (although non reverse) from a MIJ Fender Hootenaney Button Dunlop Straplock Tuning Pegs Gorgeous Seafoam Green Nitro finish from Andy Viccars inc matching headstock '64 style decal Earthing strip removed, body drilled to accept earthing wire from bridge to cavity Cavities shielded with copper foil. Groovy Aum sticker on pickguard (happy to remove before sale) Mint pickguard imported from The States. This is a well used bass and the parts do show signs of use. By nature, nitro is a delicate finish and there are marks to the body including some light buckle rash on the back. I've tried to photograph the marks as best I can but some haven't come out as clearly as I'd liked - so maybe I should describe it as slightly roadworn. The front pot has a slight crackle. I can't guarantee the electrics are original. Reddish mark on the back of the neck - no idea what it is - been there since I've had it. Incredibly dark and lovely rosewood board She's set up with a reasonably low action. No significant dead spots or wolf tones and she's an extremely resonant bass that has received lots of compliments on her sound. I used this bass when the band I was in supported Madness at Northampton Cricket Ground! I've sold this bass on once and bought it back again, so won't be disappointed if it doesn't go. Hard to price, but looking for £650. Only trades would be something Mustangy or one of the Fusion range of GK Class D heads. Messages regarding other trades will be ignored. I'd much prefer collection from Milton Keynes so any potential buyer can check her out in the flesh, in which case she'll be supplied in a leatherette slip case. I am prepared to post at buyer's cost and risk. Most couriers won't insure musical instruments unless shipped in a hard case. A good quality hard case can be added for an extra £50. Thanks for looking.

Those octave patches really are very good!

Sad to sell but needs must. Kramer XL 8 8string bass with the famous aluminium neck. Holds tune really well. Tonal range is immense. From delicate harmonics to thunderous deeps. Will cut through any mix. The case is included in the sale. Collection preferred from Cardiif. Will post at a realistically insured price or maybe meet.

I’ve just uploaded clips of some new patches I’ve made (see my latest post in the thread below). They might sway someone. Also does a convincing octaver: https://drive.google.com/file/d/1efg5sMTSGWu634ZZ2UH-d6dHoaQt7PpM/view?usp=drivesdk https://drive.google.com/file/d/1ZPdoaZQTnVBD8HarWJdq_wewLxtJTlaG/view?usp=drivesdk