Leaderboard
Popular Content
Showing content with the highest reputation on 16/08/20 in all areas
-
7 points
-
Due to the Covid-19 situation and severe back problems (66% officially disabled because of it) plus right shoulder injury (non-operable capsulitis from which, after more than 3 years, I will never fully recover), I'm selling all my basses over 4 kilos and also the ones I'm not really using. I've also considerably lowered the price for a quick sale. KRAMER 450 B original fretless from 1979 with original latte macchiato hard case. NOW OPENED (past participle) TO TRADES ! Asking price including shipping fully insured with tracking number to your place in these European countries (ask for other countries) : Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France (excluding French overseas departments and territories), Germany, Hungary, Italy, Latvia, Lithuania, Luxemburg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and United Kingdom : £999 GBP !!! In fully working condition, fully original (except for the new tuners as the original ones were dead and the two strap buttons) and in very good overall condition. Here are the specifications : Body : walnut and maple Neck : aluminium with walnut inserts Fingerboard : ebonol (bakelite, in fact) Positions : 20 original lined fretless (not a defretted model) Headstock : 2 + 2 shape (angled) Pickups : 2 original Kramer with their original wood surroundings (pickups are adjustable ONLY at the back) Preamp : passive Controls : 2 volumes, 2 tones, 3 positions switch with the original aluminium drop Tuners : new Schaller M4 180 Light (to avoid neck diving) Bridge : original Kramer Strings spacing at bridge : 18.5 mm Nut : aluminium with zero fret Strings spacing at nut : 11 mm Knobs : 4 new identical to the original knurled type ones (original well worn and partly broken do come with the bass) Scale : 33 3/4" Hardware colour : chrome and aluminium Truss rod : none and perfect very slight relief whatever strings gauge you may put Finish : high gloss Land of craftsmanship : USA Serial number : 22168 Year : 1979 Weight : 4.505 kilos Action : from a bit under 1.5 mm under the G string to a bit under 2 mm under the E string at 12th position (can go lower, but was perfect for me) Will come with the original Kramer rare latte macchiato hard case and 1 NOS spare set of Alembic CX3-45L strings that suit this fretless at the perfection, even if they have a bad habit to rust in places even when new !?! Non-smoking environment as usual. The bass has been fully set up professionally by Christophe LEDUC who did a fingerboard dressing and changed the tuners. It has been fitted with a brand new set of Alembic CX3-45L nickel pressure wound strings (45 - 65 - 80 - 105). This bass is, despite its age, still very modern sounding and dead silent. No neck diving with the new tuners. Link to the Kramer vintage aluminium page : http://www.vintagekramer.com/alum.htm Link to the Schaller tuners fitted : https://www.emma-music.com/-schaller,us,4,SCH-503172.cfm Link to the Alembic strings : http://www.alembic.com/prod/strings.html What you see is what you get ! Look at the photos taken under different angles to see the very good condition for a 41 years old bass ! Pay attention to the neck fitting where you can hide lots of things : it's the way they were assembled, sometimes very tight, sometimes not at all, but it has no incidence on the sound. All the photos are here : https://drive.google.com/drive/folders/1ENOsU_o_tTfLEu2doDGyeCVE-xYls0Vr?usp=sharing Don't hesitate to ask for more.6 points
-
Due to the Covid-19 situation and severe back problems (66% officially disabled because of it) plus right shoulder injury (non-operable capsulitis from which, after more than 3 years, I will never fully recover), I'm selling all my basses over 4 kilos and also the ones I'm not really using. I've also considerably lowered the price for a quick sale. KRAMER DMZ 6000 B original top of the line from 1980 with original hard case. Pay attention that most people are pretending that this model is a Stagemaster Imperial Bass, but it's the rarer top of the line DMZ 6000 B as the Stagemaster was introduced in 1981, had a 4 bolts neck plate engraved with Stagemaster, had 2 volumes with only 1 tone and the not so good Schaller pickups !!! Absolutely no trade ! Asking price including shipping fully insured with tracking number to your place in these European countries (ask for other countries) : Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France (excluding French overseas departments and territories), Germany, Hungary, Italy, Latvia, Lithuania, Luxemburg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and United Kingdom : £1350 GBP !!! In fully working condition, fully original (except for the added strap button for better balance) and in very good overall condition. Here are the specifications : Body : figured walnut and figured maple top with non figured same woods for the back Neck : aluminium with figured maple inserts and perfect neck joint Fingerboard : ebonol (bakelite, in fact) with crown inlays Frets : 20 Headstock : 2 + 2 shape (angled) Pickups : 2 original DiMarzio humbucking PAF (yes, in 1980 it was still Patent Applied For) P/J, the bass side of the P pickup has a different discolouration which is quite typical Preamp : active DBL-1 preamp buffer which means the controls are exactly the same as a passive bass Controls : 2 volumes, 2 tones, 3 positions "mini" switch for the pickups selection and series/parallel "mini" switch for each pickup Tuners : original Schaller Bridge : original Badass Strings spacing at bridge : 19.5 mm Nut : aluminium with zero fret Strings spacing at nut : 11 mm Knobs : 4 new identical to the original knurled type ones (original well worn and partly broken do come with the bass) Scale : 33 3/4" Hardware colour : chrome and aluminium Truss rod : none and perfect very slight relief whatever strings gauge you may put Finish : high gloss Land of craftsmanship : USA Serial number : A2048 Year : 1980 Weight : 4.690 kilos Action : from a bit under 1.5 mm under the G string to a bit under 2 mm under the E string at 12th fret (can go lower, but was perfect for me) Will come with the original Kramer hard case where the handle has been moved for better balance. Non-smoking environment as usual. The bass has been fully set up professionally by Christophe LEDUC. It has a new battery and has been fitted with a brand new set of Elixir Nickel Plated Steel Bass Strings with a NANOWEB® Coating 14002 strings (40 - 60 - 75 - 95). This bass is, despite its age, still very modern sounding and dead silent. Only very slight neck diving but with the added strap button, it balances perfectly. Link to the Kramer vintage aluminium page : http://www.vintagekramer.com/alum.htm Link to the Elixir strings : https://www.elixirstrings.com/guitar-strings/electric-bass-nickel-plated-steel-nanoweb-coating What you see is what you get ! Look at the photos taken under different angles to see the fantastic condition for a 40 years old bass (only very small blemishes) ! All the photos are here : https://drive.google.com/drive/folders/1mWh2Iwo467qeJsimpX3UdFegJOTs_HIe?usp=sharing Don't hesitate to ask for more.6 points
-
Well folks, this is it. Young @BreadBin met me in a car park on the outskirts of Frome and I got my hands on that upon which many other hands have alighted. A thousand thanks to all those who took part, including those who I was unable to fit into the scheme, it was truly a remarkable effort. Not the farthest a bass has been delivered in this way, but I have my eye on one in Scotland so any record holders out there - beware!6 points
-
6 points
-
Due to the Covid-19 situation and severe back problems (66% officially disabled because of it) plus right shoulder injury (non-operable capsulitis from which, after more than 3 years, I will never fully recover), I'm selling all my basses over 4 kilos and also the ones I'm not really using. I've also considerably lowered the price for a quick sale. ARIES BAJADERA 6 with 39 pieces of woods à la Carl Thompson ! A rare and unique ergonomic bass (only one ever made as a sixer) totally hand made by the Sabic brothers before they started working for a well known bass custom shop. Absolutely no trade ! Asking price including shipping fully insured with tracking number to your place in these European countries (ask for other countries) : Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France (excluding French overseas departments and territories), Germany, Hungary, Italy, Latvia, Lithuania, Luxemburg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and United Kingdom : £1599 GBP !!! (new price would be around £4000 GBP...) In fully working condition, fully original and in excellent overall condition (The bass has been totally refurbished by Mike WALSH at Zoot Bass). Here are the specifications : Body and neck : 39 pieces of wenge, maple, walnut and padauk Fingerboard : wenge with 2 stripes of padauk and walnut Frets : 24 inox and dressed by Christophe LEDUC Headstock : 3 + 3 shape (angled) with the same stripe of padauk and walnut Pickups : 2 original single coils Rough Crystal (LeFay pickups brand) Preamp : active only original Aries Solfegio prototype with transistors (with carbon cavity cover) Controls : volume, blend, bass, mids, treble Tuners : Gotoh Res-O-Lite 350 Bridges : original Neuser mono rails Strings spacing at bridge : 18.5 mm Nut : ebony Strings spacing at nut : 9 mm Knobs : black metal knobs Scale : 34" Hardware colour : chrome Truss rod : one (fully working) Finish : waxed Land of craftsmanship : Croatia Serial number : 10902 Year : 01 September 2002 Weight : 4.808 kilos Action : from 1.5 mm under the C string to 2 mm under the B string at 12th fret (can go lower, but was perfect for me) Will come with a used semi rigid case from FX Cases. Non-smoking environment as usual. The bass has been fully set up professionally by Christophe LEDUC who did a frets dressing. It has a new battery and has been fitted with a brand new set of D'Addario EXL165-6 nickel round wound strings (32 - 45 - 65 - 85 -105 - 135). This bass is, despite its look, totally ergonomic and very well thought. No neck diving. Link to the new Aries Facebook page where you will see it in bad condition just before I bought it in Croatia : https://www.facebook.com/AriesBassescom/ Link to the Zoot Bass page : https://zootbass.com/index.html What you see is what you get ! Look at the photos taken under different angles to see the real almost new condition for an 18 years old bass ! All the photos are here : https://drive.google.com/drive/folders/1mS73v7OV9Hts3wxWj6JACKBlZxsK17KG?usp=sharing Don't hesitate to ask for more.5 points
-
Yamaha BBP34 in Midnight Blue bought new (not by me) from Kennys’ Music in June 2019. It's in excellent condition as is the original and rather hefty hard case. Original pack of tools are included. It weighs about 9.7lbs and the action is currently set extremely low. I've cut and paste a full description from the web below. I'm selling it because I've got used to the wider, flatter neck profile on my BB1100s and simply haven't taken to this neck which is slimmer and more jazz-like. This is an extraordinary instrument and hopefully someone will play it to its full capability. I'd prefer pick up obviously, but will courier at buyer's expense. Thanks for looking. YAMAHA BBP34 MIDNIGHT BLUE PRO SERIES MADE IN JAPAN The Yamaha BBP34 is designed for the bass player that won't settle for anything but the best. The Pro Series BB's represent the pinnacle of everything the BB designers have sought to achieve over four decades of striving for perfection. Carefully crafted one at a time by a select team of master artisans at Yamaha's headquarters in Japan, and featuring a unique Alder/Maple/Alder laminated construction finished with Yamaha's proprietary IRA (initial response acceleration) technology, the Pro BB offers a rich, organic tone and incomparable resonance and playability—this is the bass that you've always dreamed off. Alder/Maple/Alder Body Construction The new Yamaha BBP34 features an Alder/Maple/Alder multi-laminated body construction. The hard maple center increases body stiffness and accentuates midrange to cut through the mix of a band, and allows a more uniform transmission of vibrations between the body and the maple neck for unparalleled resonance and sustain. 6-bolt Miter Neck Joint Miter bolting holds the neck closer and tighter to the body fusing these two separate components into one. Compared to a conventional bolt-on joint, miter bolting offers more efficient transfer of string vibration throughout the body, for improved sustain and outstanding resonance that brings every note to life. YGD (Yamaha Guitar Development) Custom V7 Pickups Alnico magnets produce a fat yet penetrating tone that works in combination with the unique Alder/Maple/Alder construction of the 700 and Pro models for an organic, well-defined sound. The new BB models are equipped with one tone control and two volume control knobs, for versatile sound shaping. Convertible Bridge and Saddle for Precise Tone Shaping: Vintage Plus Bridge The Yamaha BBP 34 Pro is equipped with the Vintage Plus Bridge, which incorporates “Diagonal Body Thru Stringing,” where strings are angled at the saddle and pass through the instrument to the bridge at a 45º angle, as opposed to the traditional vertical stringing method which places more stress on the strings. Diagonal Body Thru Stringing significantly reduces this stress while transferring string vibration to the body reliably and efficiently. Strings can also be set to the tail end of the bridge, which comes equipped with a convertible saddle that can be adjusted to 2 different angles for more precise tonal shaping and feel. The rounder side of the saddle gives a slightly softer sound, while the more angled area produces a slightly tighter one. The brass saddle of the Vintage Plus Bridge delivers a slightly deeper low-end, and the steel bridge plate offers a brighter tone. All screws and springs are made of stainless steel to guard against corrosion. Five-piece Neck with new shape The new series features a 5-ply maple and mahogany laminated neck, in a bolt-on design that delivers a sharp attack, and quick response. This durable construction resists warping and twisting and adds the tight, penetrating character of maple combined with the warmth of mahogany to the instrument’s tone. The New BB models feature a slightly thinner neck than previous BB basses, improving playability and feel for both modern and traditional players. Lightweight Tuners Lighter weight tuners offer a better balance and complement the overall feel, providing a perfect match for the smaller, lighter body of the new BB. I.R.A. (Initial Response Acceleration) Any bass benefits from being "played in," a process in which the instrument matures and opens up as the stresses between the wood and finish, neck and fingerboard, and body and hardware are released, resulting in better sound and playability. Yamaha’s exclusive Initial Response Acceleration (IRA) technology releases those stresses by applying specific vibrations to the completed instruments as part of the crafting process and gives a "played in" bass from day one. The Yamaha BBP34 Pro Series Made in Japan, this is the ultimate BB, featuring an Alder/Maple/Alder construction treated with Yamaha’s unique IRA technology, a six-bolt miter neck joint, and a diagonally strung convertible bridge. Alder / Maple/ Alder Body Construction 6-Bolt Miter Neck Joint 5-piece Neck YGD Custom V7 Pickups (AlnicoV) Vintage Plus Bridge : Convertible Bridge and Saddle Lightweight Open Gear Tuners I.R.A Treatment Made in Japan5 points
-
Not all of my Spectors are ‘boutique’ as some of them are customized Euro basses but anyway, here we go5 points
-
Up for sale is my Fender Japan Jazz Bass Special which I actually imported from Japan myself as I couldn't find one here! It's one of the coveted first run E series (1984-1987) with the all black neck and Hot Rod larger pole PJ pickups which sound amazing! It's a low number E series so I think it's possibly a 1985. It is all original, even down to the pots and switches and even has all 3 of it's original 'F' knobs present and complete (they are pretty much impossible to find and are pricey when they do show up) I suppose I have to mention the ubiquitous Duff McKagan of Guns and Roses connection - he used exactly the same bass throughout the GnR years... Which I knew nothing about until I started shopping for one! I was initially inspired to get one because Zia Geelani of Ozric Tentacles played one to GREAT effect. It really is a fabulous bass, the neck is Jazz width at the nut (which is graphite) and super solid and straight, the nicest Fender neck I've played, and the truss rod works perfectly with plenty of adjustment in either direction. The electronics are Volume/volume/TBX tone control (goes brighter and also deeper than a normal passive tone - every bit of it usable) and also a pickup selector switch which between them all adds up to incredible versatility for a passive bass. It's pretty lightweight weighing in at 8.7lbs and balances perfectly. It does have some dinks and bumps here and there and has been touched up near the input jack where it looks like it was dropped at some point in it's life. Purely cosmetic as it doesn't affect the playability in any way - Genuine road worn mojo! It is a 35 year old bass after all. Currently set up with a nice low action with a set of virtually new DR Hi Beams 100-40. Another nice touch is the head stock decal, which in fact isn't really a decal.. They were actually silk-screen printed on then lacquered over! Quality. The whole bass is pure class and feels it. I will miss it dearly and already plan to get another when my finances pick up again. I'm just looking to get back what it cost me which is £680. I will post it safely if required at the buyers expense. Thanks for looking.5 points
-
Due to the Covid-19 situation and severe back problems (66% officially disabled because of it) plus right shoulder injury (non-operable capsulitis from which, after more than 3 years, I will never fully recover), I'm selling all my basses over 4 kilos and also the ones I'm not really using. I've also considerably lowered the price for a quick sale. NOGUERA Harmonie Standard Custom 6 Fretless with amazing woods. Absolutely no trade ! Asking price including shipping fully insured with tracking number to your place in these European countries (ask for other countries) : Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France (excluding French overseas departments and territories), Germany, Hungary, Italy, Latvia, Lithuania, Luxemburg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and United Kingdom : £1599 GBP !!! In fully working condition, fully original and in excellent overall condition (second owner). Here are the specifications : Body : old stock mahogany Top : old stock spalted chestnut with thick old stock rosewood veneer between body and top Neck : one piece old stock flamed maple Fingerboard : superb old stock LEGAL Brazilian rosewood Positions : 21 original maple lined fretless Headstock : 3 + 3 shape with spalted chestnut veneer Pickups : 2 original hum-cancelling Noguera single coils with spalted chestnut covers Preamp : Noguera 2 bands Controls : volume (active/passive), blend, bass, treble Tuners : Hipshot UltraLite USA Bridge : original Noguera old stock rosewood with adjustable brass saddles Strings spacing at bridge : 19 mm Nut : bone Strings spacing at nut : 9.5 mm Knobs : 4 dark rosewood Scale : 34" Hardware colour : black Truss rod : one (fully working) Finish : high gloss Land of craftsmanship : France Serial number : 6002 Year : 2007 Weight : 4.487 kilos Action : from a bit under 2 mm under the C string to a bit under 2.5 mm under the B string at 12th position (can go lower, but was perfect for me) Will come with the original non branded Noguera hard case. Non-smoking environment as usual. The bass has been fully set up professionally by Christophe LEDUC. It has a new battery and has been fitted with a brand new set of Kalium Hybrid Bass Balanced BH-136-6BS round wound strings (29 - 41 - 57 - 76 -102 - 136). This bass has been custom made with exact specifications for the previous owner and is in almost new condition. Link to the Noguera page where you can see this very bass : http://noguera-basses.com/modele_basse.php?serie_b=Harmony&model_b=Deluxe&page=photos&categories=Serie Harmonie&galeries=Harmonie Standard Custom&nopage=1&ppp=6 Link to the Kalium strings : https://kaliummusic.com/product/string-pack-2g2x343c3k3q/ What you see is what you get ! Look at the photos taken under different angles to see the almost new condition for a 13 years old bass ! This is a totally unique bass !!! All the photos are here : https://drive.google.com/drive/folders/1hz6HjS1hD1zw9g3co2vPw1iy-oP5dnGa?usp=sharing Don't hesitate to ask for more.4 points
-
4 points
-
4 points
-
So up next will be a modern 5 string. - 35” scale - 24 frets (may opt for 21) - 2 active EMG MM pups - passive EQ VVT (may put in a preamp) - Black hardware - 18mm string spacing (single string bridge) at bridge - brass nut (10mm spacing) 50mm wide - swamp ash body with a tbd top (walnut likely) - maple neck, bolt-on - wenge fretboard (most likely) - I quite like scalloped headstocks, so will probably go with that Will be doing a full-size drawing in the next weeks..... old school style3 points
-
PJ bass with versatile 3 band EQ, including semi-para mids. Bought new from Andertons in Mar 2020, just as lockdown came into force (!) - so has only seen very light home use and is in "nearly new" condition. Almost £100 / 20% discount off the list price - so I hope this has been priced fairly / competitively. Weight: 4.4kg / 9.7lbs Spec attached Collection from E London would be ideal or happy to meet half way within a 50 mile radius; but I can consider couriering (P&P extra) if this is the only option. PS not looking for any trades on this one - thanks for looking!3 points
-
I have for sale a Fodera Custom Flame Maple Monarch 5 strings in very good condition. Comes with Fodera case and certificat of Authenticity from Fodera. Price £5500 plus shipping! NO TRADES, ONLY CASH! I will take some photos next days. Until then, if you press the pic below you go directly on the official link with details:3 points
-
Sexy tops, exotic woods, high end mega money basses I would like to see, the flashier the better. Here is mine. Not super high end but a full fat cherry burst Lakland 5594..3 points
-
Due to the Covid-19 situation and severe back problems (66% officially disabled because of it) plus right shoulder injury (non-operable capsulitis from which, after more than 3 years, I will never fully recover), I'm selling all my basses over 4 kilos and also the ones I'm not really using as this amazing one. I've also considerably lowered the price for a quick sale. SIVCAK OSCII 5, fiver Jazz Bass on steroids with the best and most transparent preamp to date (I've tried everything on the market).3 points
-
3 points
-
Couldn't find the original NME page, but in reviewing UFO in the late '70's following their tour of the US, NME used the below photo with the caption "Members of UK rock band UFO photographed entering US passport control". Always made me smile3 points
-
This chap isn't a drummer, he's a musician who drums 😁 Sadly, most drummers I seem to have the (dis)pleasure of playing with don't appear to understand that as well as keeping time, a good drummer should supply a groove that adds to and supplements the music, rather than just bashing a cymbal as hard as they can on every beat with a fill on every single drum at least every 4 bars... So if anyone knows a rockin' jazzydrummer looking for a progressive-punk-funk band please give them my details! At present I'm quite enjoying Mr EZ who resides in my phone...3 points
-
3 points
-
Exactly my feelings - latest build was a use up the parts draw thing, next one will be English spalted Ash body, and I like the idea of the rest being UK as well - good idea.3 points
-
I was a young kid, in the times before internet (but just after dinosaurs were extinct so we never overlapped) and the only way I had to find out about various bands out there was listening to the radio (very few dedicated rock shows), and sharing among friends... and sometimes just taking a punt on something. I was at the local record store looking for I can't remember what, which they didn't have, and I could not go home empty-handed. I knew of Michael Schenker and was curious... but the MSG section was empty. Then I remembered UFO. They had only Force It (1975) and Strangers in the night (1979). I bought Force It because it was cheaper. Getting home, putting the album on... Let it roll starts... and I was hooked before we got to the first solo. I wore out that album. Then I bought Strangers in the night, and I was a UFO fan ever since. I don't listen to them a lot these days, but they're always going to be up there for me. True no nonsense rock and roll band.3 points
-
3 points
-
Beware when mixing a P with a J as the P has almost twice the output of a standard J. Furthermore, good sounding fiver P are not the easiest to find. The 18 mm strings spacing at the bridge is indeed the standard for a fiver. Forget the Big Splits as just as you noticed they sound hollow and very American, meaning mid scooped. If you want to have an "authentic" sounding P/J fiver go for the standard : a single coil J at the bridge slightly overwound and a humbucking parallel wired P. I would look by Aguilar if you want to stay in, again, "authentic" sounding pickups as it's what they really do : copies of the originals. I love the Nordstrand pure single coils, but not the rest of their range. You could try Häussel in Germany, they make outstanding pricey pickups. You can also ask Christoph Dolf from BassCulture in Germany to make you a perfectly matched set with whatever cover you like. His stacked pickups are certainly the best ones I've ever heard and terrific sounding stacked J's. He works alone and as a full custom shop at ultra decent prices (around 250 Euros for a set delivered to your door in about 2 weeks). Just say my name, it may help a bit. You can also buy a set by Benedetti, THE French pickups maker. Michel, who's dead now, has been making boutique pickups all his life and has transmitted his full knowledge before dying. Ask @ped...3 points
-
3 points
-
Here's us live in our living room for a Punk 4 The Homeless online benefit yesterday. It features my phone on drums!3 points
-
Inspired by @Baxlin mentioning the Petersons, I've had a re-listen to this - Wayfaring Stranger by Hadye Bluegrass Orchestra. "Wayfaring Stranger" has been covered many many times, by many top artists..... but I reckon these Norwegian youngsters are the best of the bunch.3 points
-
Top advice there. A set up can make a massive difference. I think I'd been playing for about ten years before I'd even heard of a set up but once you've had a good set up you'll never go back. Think of it as having a service on your car, the way it drives and sounds much smoother after all the filters and fluids are changed. Changing strings can completely change the character of your bass too, but don't just think if the sound think of the feel, it's a very personal thing so be prepared to experiment. People on here sometimes sell second hand strings after trying them out for a few mins so could be easy to try a few sets.3 points
-
And tada! Survived the journey across the ocean... my first Smith after 33 years of playing! What an awesome beast, absolutely lives up to expectation in tone and playability 🤩3 points
-
2 points
-
I posed the question 'who will make our cables' the thread is just there 👇 a few below this. I alluded to the retirement of our very own obbm aka bassic bits aka Dave. Well, I'm delighted to tell you that @Chienmortbb has recently made and delivered for me, a bespoke instrument cable at a very competitive price and in very good time. I know the test of a cable is time, and only time will tell if this will prove entirely reliable. However, it looks and feels excellent, is noiseless and I am happy to recommend it. After all, if no one on Basschat had made a noise about obbm cables I would never have discovered them.2 points
-
Hard to believe my SR900 is my home beater bass (not that it gets beaten), I got it fairly cheaply on here and wow what a great Ibby, although I found a solution for those terrible Bartolini Mk 1’s, I hate them! - bit of fettling involved with those cheap Chinese covers off eBay but got there in the end 😊2 points
-
This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!!This does not compute!!!!! (I know what you mean really)2 points
-
It's a shame we're so distant..! I have an added advantage, though, in being deaf enough to support wah-fuzz-synth bass playing..!2 points
-
Haha, yeah the latter. I've been oogling the Bogart basses too. I'm not in any hurry, so it's just whatever comes up when. I treated myself to a £6 strap for my Hohner, and that's keeping me entertained for now2 points
-
I really don’t think you will regret it - when you speak to him you can ask him to vary somewhat from the ‘stock’ pick ups he does, for example leaning a 58 slightly more to a 60’s2 points
-
That's the other thing for me, I'm trying to use British stuff for my build as much as possible, such as native only woods, so UK built pickups would be good.2 points
-
Yup, looks a dead ringer for the early Cort A6. I suspect that Tanglewood had a few sample 'Baron' 6ers made, then Cort took over production. The Baron is a 96 with a serial number of 00064664, not sure how to decode that, but the 000 part might suggest it was a very low number run. In any event, £500 would probably be about where I'd think to value it, I wouldn't expect much more and probably wouldn't take much less if I were to sell it.2 points
-
You asked!! Here are three GB basses from Bernie Goodfellow; two Spitfires and a Rumour. About as boutique as you can get from my stable.2 points
-
2 points
-
Have a word with Jaime at Creamery pick ups in Manchester - my 58 P he did is hands down probably the best pick up i have ever played.2 points
-
SR300 are great basses. I reckon your best bet would be to Invest in a good set up and try some new strings on your Ibanez. I had a very early 2000's Ibanez SR500 and it was fantastically sensitive to the strings I put on it. Feeling and sounding awful with nickel 45-105s, bland with stainless Elites 40-100, better with stainless elites 35-95 and absolutely incredible with Thomastik jazz flats. £300 would get you something different, but not necessarily "better". If your heart is set on a new bass Second hand would definitely be the way to go, but sadly options will be limited at shops and trade in on your bass wouldn't be a huge sum.2 points
-
Your present Ibanez is a fine bass; there's not much better in that price bracket. Why do you want another in its place..?2 points
-
2 points
-
2 points
-
I would buy a Harley Benton and with the rest I would spend it on cheap hookers, coke and bottles of JD so I could be the proper rock star I should have always been. If I can't play Paranoid properly on that , I'm not going to play it properly on a multi thousand pound coffee table bass either.2 points
-
2 points
-
It's been a little while since I did anything to this but whilst I continue playing my mini bass instead of finishing off completely, I decided to get on with a couple of jobs on this. FIrstly, I needed to decide on what the front of this should look like. I opted for the flamed maple veneer so I can also do a matching headstock - this build is also about re-using and the maple veneer can from my dad who had this knocking around for years so sort of fits into this as it wasn't bought specifically for this build and was potentially destined for the bin as there are a few cracks in it. I cut the cracked sections away which left me just enough width for the top. I then glued the two pieces of veneer together along the straight line I just cut. I know this sounds a bit odd as the veneer is only 0.6mm thick but I wanted to do this to give me a singe sheet to glue onto the body. I glued along the edge of the veneer and held them with masking tape until dry. Net up I sanded the top of the body flat ready to accept the veneer and drew the centre line. Using a gloss paint roller and wood glue I put an even coat on both the bbody and veneer them stuck them together, holding them in place with plenty of clamps!! So this is how the tope now looks - not perfectly book matched but is fine for this project. I'm planning on having a black scratch plate on this, only because I got given one and I want to re-use that too!! Here's a mack-up of how that might look: But I also tried it without the scratch plate and that looks kind of nice too!! Decision, decisions,...2 points
-
Hi All, hope you're all doing fine... here is my actual new project EVO-X5 Super M2 points