Leaderboard

Hi, The time has come for me to part ways with some of my collection of lovely Warwick basses. These instruments get occasionally played/cleaned and waxed/returned to their classes, and deserve to go to someone who will give them the play time they deserve. After owning a few other thumbs (limited 03 & 06, 98nt) I finally got the “one” I was looking for. This bass is the lightest thumb I have played with the thinnest/fastest neck which plays and sounds great. I bought this bass from the original owner on eBay.de, and the instrument is in excellent original condition except for some blemishing of the paint on the bridge which does not affect its function or the playability. A couple of years ago I had the frets crowned/levelled and the bass set up by Chris Eccleshall guitars, and there is plenty of life left on the frets. Everything else on the bass works as expected. I wrote to Warwick about the spec for the bass and had a prompt reply from H.P. Wilfer, see below. Bass Thumb Bass NT 4 string Serial Number E xxx 87 Year 1987 Month May Number 852 Neck Wood Wenge Wood with Bubinga Strips Fingerboard Wenge Wood, with Mother of Peal Inlays Frets Bronce Warwick Frets Nut Just a Nut Brass Version Neck construction NeckThrough hidden neck construction Body 3 pcs. solid Bubinga Wood Surface Oil Finish / Beewax Pickups active EMG JJ Pickups Electronic 2 Band Electronic by MEC Hardware Schaller Hardware made for Warwick Made in Germany / Pretzfeld (West Germany) Included is a Warwick heavy duty flight case (black), and strap locks £1650 GBP collected, or worldwide shipping at buyers expense. No Trades

With a new Ritter incoming, I decided that one of my old Fenders had to go. As this is the only original finish one I have, I thought it deserved a new home with someone who would play and cherish it. It’s a truly lovely thing and in amazing condition for a ‘68 original finish. It’s been played but, I think, it’s been well looked after during its 55 year life! Currently for sale at BassBross where people can visit, try and talk about PX deals etc. I don’t want to betray any trust with Will so it’s only available for sale direct with him. The description from BassBross is: ”This 1968 Fender Jazz Bass has all the looks and mojo you would expect! Featuring blocks/binding, lollypop tuners, pickup covers, original hardcase. This really is a classic mid-late 60’s look! Everything is original apart from the addition of the some extra screw holes that brings the bridge cover further forward, these can be seen in the photos. This bass has had a life and has quite rightly been played extensively, there are plenty of dings and areas of wear to show this, we think this just adds to making this bass so classic. Please get in touch for any more info/photos. Serial number suggests early 68 Neck dated 7 Feb 68 Pots serial is 6631 = 1966 Pickups dated 3-8-68 = March 68 – Part Exchange Welcome – SPEC Serial Number – 218045 Year – 1968 Colour – Three Tone Sunburst Body Finish – Gloss Body Wood – Alder Neck Finish – Gloss Neck Wood – Maple Fretboard – Rosewood Frets – 20 Scale Length – 34’ Weight – 9lbs8oz/4.3kgs Electronics – Passive Pickups – Orignal Fender Gigbag/Hardcase – Original Hardcase Lots more pics here: https://bassbros.co.uk/product/1968-fender-jazz-bass/

WITHDRAWN; apologies - Here is a stunning example of Stuart Spector's work, this CODA is adorned with a superb piece of high grade buckeye burl and has a Pau Ferro fingerboard fitted with quality abalone Spector crown inlays. Neck NECK CONSTRUCTION: 1-Piece Rock Maple, SPECTOR® 1962 Neck Shape™ FINGERBOARD: Pau Ferro NECK INLAYS: Abalone Spector inlays NUMBER OF FRETS: 20 SCALE LENGTH: 34" RADIUS: 7.25" WIDTH AT NUT: 1.5" STRING SPACING AT BRIDGE: 0.75" Hardware BRIDGE HEX KEY SIZE: 2mm TRUSS HEX KEY SIZE: 5mm COLOR: Chrome BRIDGE: Hipshot A style TUNERS: Schaller® STRAP BUTTONS: Dunlop® Dual Design™ Electronics TONE CIRCUIT: Aguilar® OBP-2™ with passive tone and active/passive switching CIRCUIT TYPE: 9-Volt Active BRIDGE PICKUP: Aguilar® J™ NECK PICKUP: Aguilar® J™ PICKUP TYPE: Passive - Single Coil, This bass is Active or Passive via Push-Pull Pot Body SPECTOR® Original Coda™ Body Shape BODY CONSTRUCTION: Lightweight Alder PICK GUARD: None Top: Buckeye Burl top - £400 option FINISH OPTIONS: High Gloss Weight: 4kg/9lb 2oz Condition is excellent/unmarked other than a single ding on the body top inside edge; shown circled in one photo. Comes with a Spector Hardcase with key (made in Canada by TKL), a Spector Deluxe padded gig bag, a pair of Dunlop strap locks and the truss rod and bridge allen keys. Price is £2,200 by cash/bank transfer collected or local delivery/meet up close(ish) to Hertford. Thanks for looking. More info and review below the photos. Please PM me for more info/photos. ABOUT THE CODA 4™ It is no joke that Stuart Spector is always thinking about new ways to bring new avenues to improve player experience and offer new soundscapes for musicians to explore. The Coda™ Bass is the perfect example of how Stuart looks to take classic ideas and put a decidedly SPECTOR® twist on them. Part homage to the great bass sounds and styles of the past and yet new and refreshing because of the attention to detail and hand-crafted construction, the Coda™ is nothing short of a new SPECTOR® Classic. "But why do something that's been done before?" Do not let the familiar and more traditional styling deceive you. This bass is a thoroughbred SPECTOR® through and through. All of the things that make our NS-Bass™ models so popular are present in the Coda™. It's these little details and the fact that these basses are hand-made by Stuart Spector and his master craftsmen in our Woodstock Workshop that sets the Coda™ apart from the rest. SPECTOR® players are always first to point out how the necks of their guitars and basses are notably better than any instrument they've ever played. We invite you to try a Coda™ and see if you don't agree with us. "We feel we've created something new and special honouring those classic designs of years past. " ~ Stuart Spector Spector Coda Review 2011 Stuart Spector is a legend in the bass world. His instruments have provided the backbone to bands like Metallica and Living Colour, and have often been imitated. Spector’s Coda series is made by hand by the man himself and his small team in the USA, and unlike his more sleek models like the NS, which still looks futuristic over 30 years after its debut, the Coda pays tribute to an altogether more vintage aesthetic. THE LOWDOWN I reviewed both the Coda 4 (four string) and Coda 5 (five string) basses. Each features: a one-piece rock-maple neck with a 20-fret Pau Ferro (Bolivian rose¬wood) fretboard carved into Spector’s 1962 neck shape; a lightweight alder body; Aguilar OBP-2 active tone circuits; passive Aguilar J single coils; Schaller tuners; Dunlop Dual Design strap pins; and 34-inch scale lengths. The fret radius on each instrument is a curvy and comfortable 7.25 inches. Lined or unlined fretless fretboards are available at no additional charge. The Coda is available in four colours: creme, solid black, candy tangerine and metallic blue. I reviewed the Coda 4 in Candy Tangerine and the Coda 5 in solid black. The workmanship of both basses was absolutely flawless. The crucial neck joint area is unbelievably tight, ensuring unfettered energy transfer between the wood grains of the neck and body. The finish is perfectly applied – something you really appreciate on a jet-black instrument like the Coda 5 on review – and the fretwork is incredible. Bass players often aren’t as picky about the condition of their frets as guitarists, since there’s less bending involved, so I’ve played some basses with pretty woeful frets. The Codas leave them all in the dust. The sheer smoothness of the fret ends encouraged me to get more adventurous in my arrangements, throwing in more slides and grace notes than I would otherwise attempt, simply because the instruments felt so damn agreeable to such techniques. FACE THE BASS The Coda’s tones are very punchy, powerful, dynamic and balanced. The low end is deep and tight, the treble is present and raspy (in a good way) and the midrange is very musical, placed smack bang in the middle of the midrange spectrum rather than being an overly boomy low-mid or overly honky upper-mid voice. The bass’ unplugged tone is noticeably piano-like in tone, attack and sustain, and I quite happily spent about an hour and a half playing the Coda 5 unplugged before it dawned upon me that I should plug it in and hear what it could do through an amp. The Coda’s “plugged in” tone is similar to it’s unplugged voice: balanced, sustaining and with great dynamics. Because the pickups are passive and only the pre¬amp is active, you can switch the preamp off and use the bass with a more vintage tone, which is great for straight-ahead rock and old-school soul and R&B. The ability to boost the treble and bass via the active pre-amp maintains the balanced tone and sustain characteristics while building upon them for a percussive, snappy slap-and-pop tone, and dipping out the treble and keeping the bass up high creates a killer dub voice. I also liked using the bass pot to reduce the low frequency a little, to allow the instrument to sit more neatly within a recording that featured double-tracked seven-string electric guitars. IN A CLASS OF THEIR OWN The Codas are world-class basses that are built with a discriminating touch to create, dare I say it, champagne tones. The workmanship really is second to none, and the only reason I’m not immediately wiring money to the distributor so I can keep the basses instead of returning them after the review is because my bank manager would kill me. By Peter Hodgson Price: RRP $4199.99 (Coda 4); $4399.99 (Coda 5)

I bought this a few years back after falling in love with the look and the heritage. I’ve never seen another! I did a lot of research before buying and there seems to be some evidence that these were genuinely made as test runs for the Fender Custom Shop. It’s certainly recorded that one of the very first P basses out of the CS was a ‘Mary Kaye’ model. From my experience as an ex-CS dealer, the build quality is certainly up there with the CS. Unfortunately my wimpy left wrist, damaged a few years back in a motorcycle accident, means I really struggle with the classic P bass neck profile so I decided to sell it. It’s currently for sale at BassBross in Leominster. This gives people the opportunity to give it a try in the relaxed atmosphere at his showroom. It is only for sale via BassBross (which also allows for various purchase or trade options). From Will’s text: ”This is a very rare bass indeed! Rumour has it that these were early builds for the US Custom Shop. They made a limited run of Stratocasters, Telecasters, Jazz basses and Precisions. The P-basses and Telecaster 6 strings are generally believed to be the rarest. Fender Custom Shop have recently revisited this model in bring out the 57 Mary Kaye Journeyman relic model. But this one here is the original version! This bass features the full size 13′ body width making it slightly chunkier than the modern day P basses. There are a couple of marks on the side of the body and pickguard, other than that is is in outstanding condition for its age. Serial Number – V034979 Year – 1987 Colour – Olympic White Body Finish – Gloss Body Wood – Alder Neck Finish – Gloss Neck Wood – Maple Fretboard – Maple Frets – 20 Scale Length – 34” Weight – 9lbs8oz/4.3kgs Electronics – Passive Pickups – Orignal Fender Gigbag/Hardcase – Hardcase Lots of pics here: https://bassbros.co.uk/product/1987-fender-mary-kaye-1957-reissue-precision-bass/

In super condition with just one small pin ding on the rear shown in pix. 2021 model made in Mexico. no scratches or other marks, gold finish. There is some discolouration to the scratch plate, all works as it should and comes with posh fender padded bag. shipping uk £20, NOW £399

PRICE DROP TO £695 picked up or £750 delivered in the UK Tentatively posting what I believe to be a very rare Musicman USA Sub Sterling. This is not the cheaper Sterling by Musicman model - it was made in the Musicman USA factory. This bass was a little lockdown project of mine. It’s refinished in Sonic Blue Nitro and the neck has been stripped and finished with gunstock oil and is very skinny, smooth and fast. The preamp has been upgraded to Aguilar 3 Band with Switchable Mid and push/pull for passive mode by The Gallery. I’ve also swapped the pickup cover and knobs to white/cream although the originals of both are available. A rosewood fender thumb test has been added and the pickguard swapped to tortoiseshell, I have the original of this too. It’s very lightweight for a Musicman (4kg/8.8lbs) and is a genuinely great bass. I’ve had both flats and rounds on it and it’s great with both. Currently strung with rounds. I would consider posting but would much rather meet up in person. I’m based in a Chessington, Surrey/SW London but willing to travel to meet someone. Give me a shout with any questions. Thanks Dan

Thinking of moving to the SLB-300 for a few reasons but mostly for portability; despite being a whole lot easier than my 4/4, this baby can still take some moving around. Krivo mag PUP adds a new dimension to the tone, especially when blended with the onboard pre-amp. No trades thanks, collection from Canterbury ideal but may be tempted into the car or onto the train with it. For those of you who like an EUB to feel like an upright, this is the EUB you've been looking for. As an instrument to play it feels the part more than any other EUB I've played, and I've probably played most of the main contenders at one time or another. Close your eyes and use headphones and the feel and sound are as close as you'll get (I tend to rehearse it unplugged acoustically as it's fine as long as there's no background noise). Speaking length is just under 42 inches/106 cms and it's a D neck. Sound-wise it's taken me a long time to get the tone I want from it. In fact, having worked through various wing, underfoot and fingerboard PUPs, I've found that the tone on which I get the most compliments from both my bandmates and audiences is the at first hearing rather thin sounding and mid-heavy tone from the onboard circuit, which despite not sounding great solo'd seems to work really well with a band (also very well with headphones which is what the bass was originally developed for of course). The smaller the overall sound of the band the more I blend in the Krivo which adds some weight to the tone especially to the lows. It's Yamaha. It is the most stunningly engineered instrument, you get the sense that it would take a seismic event to damage it, and although there are a few dents here and there, the bits that matter, the board, bridge, tailpiece and tuners are all in perfect functional and aesthetic condition. I'm not sure I'm going the prefer the SLB-300 but I'm pretty sure I'm going to find it easier to carry to gigs and rehearsals. The only down side of the 100 is that it is very heavy - way heavier than my 4/4 in fact, and very long. There's a very big part of me would like to keep it and also buy the 300, take the 300 out with me and keep the 100 for silent practice at home. But that part of me also hasn't got as much money as it would like to think it has so is probably going to be disappointed 🤔 Strangely enough, despite being the oldest of the SLB series this is still far far the most expensive and will take close to £5,000 out of your bank account if you could find one for sale https://www.yamahamusiclondon.com/SLB-100-Silent-Upright-Bass/pidKSLB100. This is perhaps a reflection of the fact that in the context of it's original application - a silent headphone oriented rehearsal instrument for professional musicians as opposed to a gigging instrument - it really does tick all the boxes in a way that the more recent Yamaha models, developed with an eye to gigging, perhaps don't.

Hi, Here’s a Darkglass Alpha Omega Photon. It’s in fantastic condition as it’s only been used a couple of times. It’s a great unit, got amazing sounds out of it however I realised I might be more of an analog dude. It comes with the box and a carrying case I got separately. I can ship it for a fiver anywhere in the UK. Let me know if you’re interested and I’ll take it from there. Cheers!

These are absolutely glorious things.