.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
disssa
-
Posts
395 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by disssa
-
Unfortunately not at the moment. I would like to change the PCB a little because there are one...two errors. Maybe then...
-
Peavey Standard MKIII Preamp:
-
My version of the Matchless DC-30 preamp (EF86 channel only):
-
Not an 1:1 clone (this will come next) but really close to a Furman PQ3:
-
-
Way Huge Angry Troll Clone:
-
I used the original factory schematics 1:1, also for the switching. I compared the copy with the original. They sound the same to my ears.
-
Some of my Peavey (Preamp) Clones:
-
Acoustic 360 preamp: First I tried the viva-analog Version, but I dont like it. The assembly instructions are not easy to understand and also contain errors. The potentiometer layout is terrible and looks amateurish. So I used the Factory schematics and designed my own PCB layout. I kept the blend function.
-
The heatsink is bolted to the voltage regulator of the tube heater. According to the data sheet, no heatsink needs to be used. But I do. The voltage regulator gets very hot. I created the layout for the pcb. I used the factory schematics.
-
Fender Bassman 100 Preamp (bass channel):
-
What is the fault? Capacitor and diodes polarity correct? ICs plugged in correctly?
-
I created two different versions of the pcb. Version 1 is only a single channel-version, version 2 is a dual channel-version. How important is the limiter? Should both channels be switchable?
-
I made a PCB, but haven't set it up and tested it yet...
-
A mix between Vong by schalltechnik 04 and Broughton Hi/Lo PassFilter:
-
I can't find any schematics for the Grand Prix...
-
No new invention, but again just a copy: Trace Elliot V-Type Preamp as a pedal
-
I traced a lot of Broughton Pedals. I noticed that well-known circuits have been modified a little bit. Not more. I traced also a lot of other pedals. Most pedals are based on well-known circuits. I build the pedals for myself. I also don't publish schematics from traced pedals. At most from pedals that are only a 1:1 copy themselves.
-
My version of the schalltechnik_04 Pumpernickel:
