basslondon

BEQ 700 pedal 

Great Swiss army knife for those tricky tonal situations...😄

Pick up / drop off (in London )

Squier by Fender Jazz Bass Metallic Red
Very Good Condition
The Squier Affinity Series J Bass® features a rosewood fingerboard,
two single-coil Jazz Bass® pickups and a top-load bridge.

COLLECTION / PICK-UP / DROP-OFF in LONDON

Bass Amp setup including:
Behringer BX4500H Ultrabass 450W Head Good Condition
and a tatty hand built Bass Cab containing an Eminence Kappa 600W 15" Speaker nice and compact if a little heavy! Not a Neo speaker.....😏 Sounds good though!

COLLECTION / PICK-UP / DROP-OFF in LONDON

Behringer BX4500H Ultrabass 450W Bass Amp:
 Powerful 450-watt bass amplifier head

Even has one of the bungs in the port!

Trace Elliott made in Maldon 

All original Trace drivers all working perfectly fine.

No issues maybe a bit tatty in the covering but a sound unit otherwise. 

Pickup only or arrange collection from you favourite courier.

Any questions fire away

The bottom bit of a 1210h combo ( so not quite a 2103H but 90% there, but not totally as there's no tweeter control ( but there is still the tweeter)

All original trace/celestion  drivers and in green carpeting.

Pickup only or you can arrange courier collection.

Any questions fire away.

Righto 

Update 1x15 cab is sold!

Update Head sold subject to completion.

This is a chance to get traditional trace gear in good working condition for a bargain price. PICKUP ONLY..... You'll need a van or a friend with one!

Up for grabs is a 4x10 cab, 1x15 cab a 2x10 cab* and a GP12 SMX 280w head*  (the head was removed from the 2x10 combo to give more options as a stand alone head)

Tatty covering on some parts ( the head especially, nothing a bit of tolex wont sort out) everything working fine.

All cabs and amp are the Maldon factory years.

All drivers are original Celestion for Trace all work perfectly.

Any Questions fire away!

Can split but mainly looking to give someone a bargain!

N

14 hours ago, tauzero said:

IIRC, you need to use the software with the Superfly connected direct to the computer, not via a hub, as it twangs the wires directly rather than using a driver.

I dumno..it works on my brother's old  laptop with Windows XP faultlessly. I managed to get a driver for it to work on Windows 10 for about three days then the inevitable windows update broke it again by replacing the USB driver with a later ( non working version) it's just far easier to have an old cheap ( I see xp netbooks for £30)  xp laptop for this  and use that....takes all the headache out of everything.

500 watts into 4 ohms ( 2x250w output) 

Includes the windows software.

Programmable Preamp.

Software works a treat on Windows XP not so much on Win 7 and 10.( The driver software is the culprit ........I've heard you can get around it in Win 7 and Win 10 but I gave up trying.....)

Small but solid. This is no MarkBass or TE Elf  featherweight. 

Tatty but fully functional.

It's gonna be 10-20 quid to ship I should imagine. 

Open to pickup of course. I work in London so a meet up there is possible as well as here in Norfolk.

Lovely tool.

Right. The basic cab is a light but strong ply cabinet. Used to house 300 w Fender driver ( heavy but not overly efficient. ) No crossover and vented slots at the front, it’s surprisingly light and sturdy.

I upgraded the driver ( at considerable cost) with a Faital Pro 15” HP1060. These are not the cheaper modified FH/PR range you find in the Vanderkley cabs but premium HP range ...offering the same Faital pro sound with elevated power rating.  This driver is rated at 1000w ( 2000w peak) and with 97dB sensitivity is an easy drive for lower powered amps. It’s 8 ohms so can be coupled with another cab without killing your amps power stage.

Collection from Kings Lynn...audition is possible in a room without other folk. Just you and an amp. ( Social distancing is still key at this time).

My First Trace Elliot amp.... Bought for £600 In Birmingham 1989. Lasted til 2002 when amazingly it got stolen from a gig. We had just set up and sound checked and went off for some food... came back and there was just a bunch of leads where the amp had been. This was in a  bar in Tolouse in France. I had to do the gig with my Sansamp and a side fill. The Gendarmes were useless btw.

Open to Trades

Saw him play at a gig here in Kings Lynn last year with Kimberley Rew ( Katrina and the Waves) lovely chap to talk to. The free bonus was a certain Thomas Dolby was there too doing a couple of tunes solo as the warmup act!

Nice!

And cheap!

Neck is straight, action is about 4 or 5 mm til about the 14th Fret then rises to 5 or 6 mm by fret 24 (doing the measurements with a diy tape measure not a micrometer so might be a mm or so off)

Neck thickness is about 22mm (so neither  thick not thin ..it’s thinner than my Shuker Jazz but similar to my Status Empathy 5. 

String to String Spacing:

at the nut: 9mm ( string centre to string centre)

at the  12th fret : 12 mm

at the bridge : 16mm

nut width is  42 mm

1 hour ago, therealting said:

Always wondered what these are actually like to play...

They are lovely.....

20 hours ago, Hellzero said:

Here's the real power of this monster tested by a tech on TB :

"Using a 1 Khz signal in, and a maximum of 2% distortion here's the results:

2 Ohm operation with only 1 channel = 930 WRMS
4 Ohm operation both sides at the same time = 625 WRMS per ch.
4 Ohm bridged = 1500 WRMS"

I had one, damn heavy and powerful.

GLWYS.

Thanks for clearing that up fella....😀

This is sold pending the usual 

ive just been made aware  that I paid way over the odds for this when I bought it. In this case the price has had a £100 reduction and is available immediately without the 8 week wait of a new one. 

3 minutes ago, prowla said:

It is something to factor in when buying from abroad.

Exactly! Buy this one instant gratification and not vat/duty hassles. Make me an offer today lol....

45 minutes ago, prowla said:

Crikey - taxes must've been huge!

 

Well the VAT was £71.75 and the duty was £8.75 on a £349.00 bass so sorry it stands me £430 .50  in not £450. Not far off mind...

2 hours ago, Woodwind said:

Out of interest what's the voltage/hertz in Qatar?

Did you get any noise from that impressive looking transfromer?

It’s 240v/50 hz in Qatar ( a hang over from it’s days as a UK colony ) but the head had come via the US airbase ( Al Udeid just outside the city) so when it arrived it was wired for 115v and came with the transformer.

First order of business was to change the mains in on the transformer in the Trace from 115v tap and connect it to the 230v tap. That negated the need for the transformer so I then worked without it. so I can’t tell you how noisy the transformer was...