Jump to content
Why become a member? ×

Apeneck Sweeney

Member
  • Posts

    107
  • Joined

  • Last visited

Everything posted by Apeneck Sweeney

  1. I've just had a look at this and if you use a Pan block at the beginning of a preset you can do this with one block. Thanks for the idea.
  2. This may be useful to anyone wondering about the Stomp’s versatility. I do a doubling gig with a function band where I have to change from double bass to bass guitar mid set. I use IEMs but still have my amp on stage. The way I use the Stomp is bass guitar into the mono input, double bass into effects return, Effects Send to my amp (with a send block just before the amp/cab sim at the end of the chain), the Left output to a radial JDI for front of house (with amp/cab block) and the Right output going to my IEM mixer using a TRS to XLR (though the headphone output would work too). I’ve found that I tend to have to use the ground lift on the JDI. My double bass patch has an effects return as first block (with no signal coming through it from main input) and a send at the end so it works the same as the bass guitar blocks in terms of front of house and stage amp. One problem with this setup is that I can’t use the Stomp’s tuner for the double bass without swapping over plugs. I do have a small Wee Lush A/B switch but I’m trying to keep the setup as simple as possible. I have a larger board with HX Effects and Mesa Subway DI on but found stage real estate enough of a problem with having the double bass and bass guitar. The Stomp and JDI fit nicely under the band music stand. I had thought about swapping over the Mesa with the Stomp and having the HX Effects in an effects loop from the Stomp. That way I could just take the Stomp on smaller footprint gigs but still have the amp sims when there was more room. To do this I’d have to change my doubling gig presets with the Amp/Cab block on path B at the end of the chain with it panned fully left and the dry path (without amp/cab) panned to the right side. Left output to FOH, right to stage Amp and the headphone output to IEMs.
  3. It sounds like the same as my ACG's preamp (SEQ). Coincidentally I just wrote to Alan today about this preamp as I wanted to try the version with the overshoot peak pots and was considering upgrading. He told me there was an adjustable trim pot inside that can alter the overshoot and sent me the diagram to show where they were as there are 2 trims on each of the filter boards. The other trim pots are to balance the level of each pickup. You may already know about this but I had been playing it for 3 years without realising. I boosted the trims today and absolutely love the sound. The bottom end has really come to life. It might be worth trying before selling. If not good luck with the sale. ACG_SEQ.pdf
  4. There is an export button on the top left (I think) of HX edit. I have my patches saved on my mac
  5. I'm interested but will have to wait for someone to buy my my Erhlund EAP first. (probably time to give it a bump)...no need it's still on first page
  6. I managed to find a free hour to go and visit Pierre. It turned out to be only a 12 minute cycle ride away from where I’m staying. It was good to actually get my hands on one of the basses I’d looked at and also try out some other great instruments. I highly recommend getting in touch with him if you find yourself in Brussels.
  7. Yes, there’s some great looking basses there. Unfortunately it’ll probably be too awkward to arrange a time as I’m unlikely to know in advance when I can excuse myself from parenting duties. I do have 3 days though so may drop them a line. This just the sort of info I was hoping to find here. Thanks everyone.
  8. Thanks. That’s a shame. I’ll have to default to my usual sifting through vinyl instead. ps I’m still enjoying the fretless Maruszczyk Frog though there’s a Wal on here that’s got my attention.
  9. I’ve just ordered a super midget but I’m still tempted by this. It depends on if I can be honest enough with myself to admit that I’m going to keep both rather than the partner ready line : “I need to try them both next to each other and keep the one I like best.” Manchester and Yeovil are too far away from each other so I’ll have to wait to make my decision once the post option appears.
  10. I’m in Brussels for a few days with family and was hoping to slope off at some point and have a look at some basses. Has anyone who knows the city got any recommendations? Time will be too short to just try the google top ten and hope to get lucky.
  11. Go to https://uk.line6.com/software/ click on Downloads at the top, then go to HX Stomp in the Hardware pulldown menu. the list of all effects is pages 19 to 27. You can bypass HX Effects (which I have) so I'm guessing you can on the Stomp.
  12. Double bass wooden endpin from Lando Music. http://www.kontrabass-atelier.de/teile_e.html#ep It's approx 16cm without rubber, approx 18cm with. For 10mm end pin socket £25 inc p&p I've recently increased the height I have my bass at by 7cm (finally sorting out my left shoulder problem in thumb position) so can no longer use this. There are a couple of small scratches on the metal ring (see photo, they're both pretty similar so didn't take 2 pictures) I did have a thin strip of paper inside the metal ring to keep it nice and tight but it seems fine at the moment. I guess this may be due to the wood reacting to temperature. If you're in Manchester you can pick it up and save yourself a fiver. I've tried to get a decent shot of the length but due to the angle when getting the whole thing in it looks out with the ruler. Did a close up on the last one.
  13. I promised my wife that I would sell it once I got my Helix HX but I'm such a hoarder I was tempted to keep it just in case I needed it in the future. There are more than a few things I have that also fit into that category (like spare emergency amps that don't really work that well anymore). Typical conversation with self...I might need it as a practice/headphone amp...but you have a Phil Jones Bass Buddy...well what if that breaks?...etc I now need to have a long hard look at my preamps. Marie Kondo has a lot to answer for.
  14. Thanks for the messages Al Know & songofthewind.
  15. After reading a post from another bass player and where they placed the Ehrlund I seem to have finally found a place where it works on my bass. I'm withdrawing this from sale for the time being. For Sale Ehrlund EAP acoustic pickup. Highly regarded but just not quite right for my bass. £240 including signed for and insured UK postage. PRICE REDUCED TO £225. (That's about a £200 saving on new from Ehrlund.) Paypal Business payment for your peace of mind. https://ehrlund.se/product/eap-system/
  16. Zoom B3n in very good condition. It's been attached to my pedaltrain with hard case since I've had it. It's pretty much mint apart from a couple of small marks on one side (see photo). I've left the hook velcro I used on in the middle. When I attached it to my board I removed the rubber feet and had strips of velcro in their place. The rubber feet were kept on greaseproof, sticker backing paper, so were reattached with no loss of stickiness. The price includes UK signed and insured postage.
  17. I just bought some strings from Luke and they were delivered quickly and in described condition.
  18. PM'd re other set of Thomastiks (and, optimistically, the La Bella 760FLs if Roger hasn't taken them.)
  19. I'm trying to fit the helix plug (dc-3G?) under my pedal train metro. I plan to use a splitter c14 to dual c13 to feed 1 spot cs6 and the dc-3G. There's only enough space for the helix power if I don't add any of the European or uk plug adaptors, as they make it too wide to fit flush against the underside of the board. Does anyone know what I need to plug directly into the 2 flat pins? I think I might need a c14 to NEMA 5-15R and just plug into the 2 non earthed holes. I spent a lot of time searching online for information but had no luck. I would have rung up Maplins if they were still around. Any help appreciated as I'd rather check before ordering one. Thanks.
  20. I'd been looking at the same seller for the HX Effects for a while but was having so much trouble deciding between Stomp, LT & HX I knew that once I made up my mind I'd not want to wait 8 weeks for it as I'd probably have changed my mind by the time it arrived. I took the link down as I wasn't sure about basschat policy on this forum for commercial sales.
  21. just seen one for £349 on eBay (I've just bought a Hx Effects but was still getting eBay alerts) OK....just noticed it's the Grey seller (if I have the right term - someone referred to the same seller when selling HX Effects preorder) and not someone selling theirs on. I've removed link
×
×
  • Create New...