Jabba_the_gut

How it is at the moment next to how it should look when done.

Pockets and cavity routing has been the next task. As with most people, I find it quicker to remove the bulk using a Forstner bit then finish off with the router. I've had five bits of routing to do here; neck pocket, bridge pocket, pickup cavity, battery box cavity and control cavity. I've got template that I have used for each of these before so it isn't such a time consuming task this time! The pieces of spalted beech next to the body will be used to make the control cavity cover. Always nice to have a couple of pieces for this so I can either pick the one that looks the best (if all goes well) or use the spare (if it doesn't!!).

Could you post a picture of the eq connection please.

Nice. I like the white pickguard. and it being very orange!!

That's what I was wondering... I trawled for more pictures and found this link https://www.dhgate.com/product/top-quality-mayones-custom-bass-guitar-4/405960006.html Looks like this might well be some form of knock off then with a logo. Starts with the description '4 string....'.

No maker name on the ad - is it a Mayones Setius Bass??... https://www.ebay.co.uk/itm/Custom-Bass-guitar-5-string-Fan-frets/164255778483?hash=item263e6846b3:g:eEUAAOSwmv1e7zU-

After work and going for a walk wasn't too much time left this evening but enough to get the neck trimmed and the tuner holes drilled. Careful use of templates and router table - always makes me nervous at this stage as it is the final outline and you really don't want anything moving or cutting were it shouldn't!! This had to be done in two stages due to the angled headstock - template for the fretboard and a second small template for the headstock. Next task to trim the body and start routing that.

Quick early morning bit of band-sawing - I've cut off the excess so the neck is ready to trim using the router. Now that it is trimmed, I'm glad I replaced the veneer on the front of the headstock as the replacement is a really nice match to the body wood. The black mini toggle switches I want for the pickup and LEDs have turned up. Easy enough to get a chrome finish but a black finish is harder to find and seems to have a premium attached - worth the extra though so they fit in with the general look.

Now glued and clamped. I check the LED function at each little stage of construction to make sure nothing has got trapped or damaged anywhere in the process as there is still the possibility of fixing up to this point.

This is the back of it with the LEDs installed. I cut a channel about 4mm wide and 4mm deep which everything sits in and is then glued in place. Two wires then stick out the back of the neck which will be connected to copper tape that makes the contact with the body. I'll stick a photo of that up (if I remember!!).

It is an option I've consider trying as there would be less fiddly wiring and it would be possible to use something like a tri-colour LED for more tarty options! The downside would be more fine routing on the back of the fretboard to accommodate each piece of optical fibre but also to ensure the light from the LED was evenly distributed as not to end up with one side dot being brighter than another. I might try this on a bit of scrap at some point to see how do-able it would be.

This has been really time consuming and quite fiddly but it's done. The LEDs are installed in the fretboard, glued in place and the clear plastic installed and trimmed to get the light to the edge of the board. It's always quite a bit of faff as you need to ensure that the (really thin) wires are away from the fret slots in case they need to be cut a little deeper after the board is radiused. Everything also has to fit in the channel in the back of the fretboard so it s flat and level ready to be glued onto the neck. It's always nice to get to this point as almost everything is now robust whereas prior to gluing everything is quite delicate. I've installed the truss rod so next task is to drill the hole through the neck for the wires then this can all be glued together. The last item to make the LEDs completely robust is to get the wires soldered to the connection on the back of the neck. Once that is done nothing is left exposed or vulnerable and I can get on with the basic shaping of the neck.

I like those Triton routers. Measure twice, measure again and again. Make yourself a decent template, remove the bulk with a Forstner bit, practice routing to your template on a spare piece of wood taking a little off at a time then go for it!!

That really is looking very nice! The hardware contrasts nicely with that top wood. I'm not sure if the square corners would be an issue or not as it's not something I've tried so I can't speak from experience. The only times I have seen cracking on square corners is where the finish is a thick lacquer/painted finish (thinking neck joint on P and J basses typically). My gut feeling would be that it wouldn't be an issue here as Status did it before with that neck and also there is a substantial amount of wood between the heel and the pickup and also down the sides of the neck. What finish are you planning on for this?

What a faff these LEDs are!! This really is quite time consuming and you really have to be patient to get everything carefully soldered and lined up. I've got some fine multicoloured wire from an old SCART lead that is perfect for this job and a very small soldering iron. The LEDs are wired in pairs in series with a resistor for connecting to a 9V battery. All the LEDs are now installed in the fretboard. They're connected to a battery and I'll leave it on for a while just to make sure everything works ok before I glue them in which is the point of no return. As soon as I'm happy with these I'll glue the fretboard on and start shaping the neck.

Hi. Sorry - was only planning on posting in the UK. Cheers

Very nice!

Took me ages to get the hand written effect.....

A cheapy eBay 3 band preamp if anyone is interested. Never tried it and looks like it lost the balance pot during it's time in parts box! Might be of interest to someone. I won't necessarily give it to the first reply just in case there are a few people interested. Cheers

Nope, only side dots. Face LED dots are just too much!!

I've cut the fretboard to its final shape and marked it up ready for drilling to fit the side LEDs. Always good to mark it up and double check before drilling. Next was a few test holes to determine the correct positioning of the markers using one of the offcuts from the side of the board. That way I can ensure my drilling guide is correct and all of the holes will be in the same place; as soon as you have two contrasting materials such as the markers and the ebony, anything that is even slightly out of line stands out in a bad way!! Next task is to route the slot on the inside of the fretboard that the LEDs will sit in. Fitting LEDs really is quite a faff......but they are bright and shiny! (I'm actually thinking they might be a bit too bright so a three position off-dim-bright switch might be required).

Fancied a quiet little job so decided to make a couple of truss rod covers. I've used mother-of-pearl and ebony again as it has such a nice contrast and looked good on my last build. First task, printout the logo, cut it out and stick it to the mother-of-pearl the cut it out using a jewellers saw (with a vacuum and a dust mask). Then stick another paper logo onto the ebony and cut the recess using a Dremel. The inlay pits into the recess and any gaps can be filled with ebony dust and glue. Once dried, the whole thing can be shaped and sanded.