EDIT EDIT: SOLD, THANKS ROB!!
For sale, my XS700 power amp:
Here's the technical stuff...
The Xs Series of power amplifiers from Crown represents a new era in affordable, quality switch-mode power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features.
The Xs Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of five models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. Xs Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements - reliably and within budget. Every Xs Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty.
Power Output for Xs700:
* 2-ohm Dual (per ch.): 900W
* 4-ohm Dual (per ch.): 750W
* 8-ohm Dual (per ch.): 450W
* 4-ohm Bridge: 1900W
* 8-ohm Bridge: 1645W
[i]
Features:
* Housed in a rugged, all-steel 2U chassis
* Efficient forced-air fan prevents excessive thermal buildup
* 2-channel models have XLR-1/4" combo and Phoenix-style inputs, daisy-chain XLR outputs, touch-proof binding post outputs and Speakon outputs.
* Precision detented level controls, power switch, and eight LEDs which indicate signal and clip for each channel, power, AC mains, bridge mode, temperature and fault conditions
* Microprocessor-controlled protection system
Specifications:
* Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
* Frequency Response (at 1 watt) 22 Hz to 22 kHz: ±1 dB
* Phase Response (degrees at 1 watt, 20 Hz to 20 kHz): +5°, –18°
* Signal-to-Noise Ratio: A-weighted, below rated power: > 102 dB; 22Hz to 22kHz, below rated power: > 97 dB
* Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 20 kHz: < 0.5%
* Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1): From full rated output to –40 dB: < 1%; From full rated output to –30 dB: < 0.5%
* Damping Factor (8 ohm) 10 Hz to 400 Hz: > 200
* Crosstalk at 1 kHz, 20 kHz (below rated power): > 65 dB, > 45 dB
* Voltage Gain (at maximum level setting): 47.4:1 (33.5 dB)
* AC Line Voltage and Frequency Configurations Available (±10%): 120VAC/60 Hz and 240VAC/50 Hz.
Indicators:
* Signal: Two or four green LEDs, one for each channel, illuminates when the channel's input signal level is above –40 dBu.
* Clip: Two or four front-panel red LEDs, one for each channel, illuminates when the channel's output signal is being overdriven.
* Power: Yellow front-panel LED indicates amplifier has been turned on and AC power is available.
* AC Mains: Red front-panel LED indicates the presence of AC power at the power cord, even if the amplifier is not turned on.
* Fault: Red front-panel LED illuminates whenamplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on.
* Bridge: Yellow LED indicates that amplifier is in bridge mode.
* Temp: Red LED indicates that channel(s) are in thermal protect mode.
Construction:
* Ventilation: Flow-through ventilation from front to back.
* Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
* Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³).
* Dimensions: EIA Standard 19 inch (48.3 cm) rack mount width (EIA RS-310-, 3.5 inch (8.9 cm) height and 17.14 inch (43.5 cm) depth behind the mounting surface.
* Weight: 28 lb 14 oz (13.1 kg). [/i]
My set up using this was my X3 Live as a pre, the XS700 as the power and my [url="http://basschat.co.uk/index.php?showtopic=67987"]Ampeg 4x10[/url] to throw it! Never turned it up past 10 o'clock and was seriously loud enough then - a cracking rig!
I'll get some photos up ASAP, will also include the 2U flightcase [url="http://www.flightcasewarehouse.co.uk/music/typeproducts2.asp?id=2836-2577"](just like this one)[/url] which it's lived in from new
Looking for £300 plus postage or you're welcome to collect, any takers?
Cheers