Jump to content
Why become a member? ×

sambassman

Member
 View Profile  See their activity

  • Posts

    98

  • Joined

  • Last visited

 Content Type 

Everything posted by sambassman

  1. sambassman
    [quote name='hagguy' post='1076676' date='Jan 3 2011, 07:31 PM']looking for a small combo with cash my way for my genz amp, it's in very good condition as is the footswitch and case ideally i'd like a line 6 studio 110 but i'm open to offers of other small combo amps, i would do a straight cash deal but i'm not sure what the going rate is for a shuttle now, if you have any questions or offers just send me a mail. here's the specs SHUTTLE SERIES Shuttle 6.0 Our new SHUTTLE series also incorporates this high- innovative removable chassis design powered 600 watt design, while remaining extremely compact and weighting only 3.75 lbs. The SHUTTLE 6.0 blends the best of analog and digital platforms to produce the ultimate in warmth, punch and power. The signal path utilizes a 12AX7 tube preamp with our acclaimed Active EQ and responsive Signal Shape circuitry. An optional foot switch is available for use with the Signal Mute and our 3 Signal Shaping circuits. The power amp section is a leading-edge high power CLASS D module, which also incorporates a Switch Mode Power Supply. The SHUTTLE 6.0 delivers 375 watts at 8 ohms and over 600 watts at 4 ohms. As a part of the unique Shuttle design the amplifier can be removed from the “saddle” of the combo models to provide ultimate flexibility in this bass system. Genz Benz quality and versatility delivers over 600 watts output and a rich feel in this lightweight package. There is no sacrifice of tone or power in order to enjoy the benefits of a bass amp under 4 lbs. For any concert stage the Shuttle 6.0 is a high-powered bass “solution” that still fits into your gig bag. FEATURES • Ultra Light 3.75 lb Design • Power: 375W/8 ohms; 600W/4 ohms • Analog 12AX7 Tube Preamp • Digital SMPS (Switch Mode Power Supply) • High Current Class D Amplifier • Active EQ w/Parametric Mids • 3-Band Signal Shape Circuit (Footswitchable) • Signal Mute Switch (Footswitchable) • Tuner Out • E xtended Range Input Gain for Active/Passive Sensitivity • Limiter Circuit • LED Status Indicators • Speakon® Speaker Outputs • Internal Fan Cooling • Full XLR Direct Out Interface • Aux. Input • Headphone Jack • Effects Loop • Optional Footswitch available (click for larger image) Power Output Cabinet Response Speaker Configuration Preamp Type Weight Lbs. Dimensions HxWxD 375 W/600 W 8 ohm / 4 ohm N/A N/A TUBE 3.75 2 1/2" x 10" x 10 1/2" STL-BAG F/S-STL STL-RK Padded carry bag fits both Shuttle 3.0 or Shuttle 6.0 amps. Optional 4 button footswitch for the Shuttle 6.0, and 9.0 includes 25 foot cable. Switches Mute and 3 Signal Shape Filters. Two space aluminum rack kit fits our Shuttle 6.0 and 9.0 models[/quote] price?
  2. sambassman
    stingrays and jazz basses have amazing slap tones. but i prefer the fender jazz for slapping. for both sound and comfort. thats my opinion anyway. im sure many will agree
  3. sambassman
    [quote name='henry norton' post='1072523' date='Dec 30 2010, 10:25 AM']If you use active pickups like EMGs (not just an active tone circuit but proper active pickups), you won't need an earth connection to the bridge but otherwise it's pretty essential.[/quote] yeh its all passive. just a normal fender. cheers. ill keep it safe
  4. sambassman
    [quote name='icastle' post='1071989' date='Dec 29 2010, 06:44 PM']Sorry - that wasn't very helpfull was it? Best thing to do with it is to wrap some tape round it to keep it clean and sand/spray around it. When you come to reassembling the bass remember to unwrap the wire and make sure it gets a good contact with the metal underside of the bridge or you will get some nasty buzzing noises.[/quote] i thought it was something like that. couldnt be too sure though cheers pal
  5. sambassman
    [attachment=67356:Photo_0074.jpg]hiya chaps i was taking all the hardware off my bass in preperation for paint stripping and as i was taking the bridge off i came across a strange hole with a wire coming out of it. [attachment=67354:Photo_0075.jpg][attachment=67355:Photo_0075.jpg] can anybody tell me what this is for? cheers sam.
  6. sambassman
    [quote name='sambassman' post='1060759' date='Dec 16 2010, 05:13 PM']no its not a reissue. its a highway one. they sorta made it so the paint would chip away for a vintage look[/quote] iv jus been scratching it with a screw driver. and the paint is coming of no problem. i may be able to get away with no chemicals. just sand paper and some method of buffing
  7. sambassman
    [quote name='BassBod' post='1060454' date='Dec 16 2010, 12:04 PM']Depends on what is under the nitro. From memory Fender re-issues have a sealer coat under the nitro paint that is a lot tougher to remove. No idea what it is, but I'd guess some sort of polyester - its thicker and much harder than the nitro paint. I'd suggest getting the nitro off fairly gently, (stripper/ scraper and wire wool?) and seeing if the clear layer underneath will give you the look you're after?[/quote] no its not a reissue. its a highway one. they sorta made it so the paint would chip away for a vintage look
  8. sambassman
    [quote name='BurritoBass' post='1059885' date='Dec 15 2010, 07:02 PM']Here are two Precisions I have stripped, both black 1970s basses I used Nitromors. You need a bit of patience but no heat gun. I did mine outside the house on the patio and on the front step of the house. I too love that undercoat BUT you won't get around keeping it. Any method will damage the undercoat so it has to come off. You'll need a stripping knife / stripping tool too and also sandpaper to tidy up afterwards. I've added a wood dye after on one bass and I use wax at the end. Very satisfying and I really bonded with the basses as I'd put the hours in. You'll enjoy it. I loved doing mine[/quote] cheers. i think i have some nitromors lying around somewere. ill try that got miself a little project over christmas haha cheers chaps sam.
  9. sambassman
    [quote name='Al Heeley' post='1059792' date='Dec 15 2010, 05:50 PM']You only have 3 choices - chemical stripper, abrasives or heat gun. All of these will affect the lacquer underneath so you have to be prepared to refinish or sand back to bare wood and lacquer or oil finish again. Its virtually impossible to remove half a coating.[/quote] whats the best product for stripping the body then?
  10. sambassman
    [quote name='Ou7shined' post='1059799' date='Dec 15 2010, 05:56 PM']It seems you've answered your own question. Though why someone would put nitro over a previous finish without removing it first is beyond me.[/quote] yeh its bonkers. its a factory finish though =/
  11. sambassman
    Hiya all i have this Fender jazz bass with a nitrocellulose finish. but i want to strip it to leave natural. but im quite reluctant to use chemicals because there is a really nice varnish finish underneith the paint and im afraid it will take the varnish with it. thats what i want to keep. the paint itself chips away really easily. i can actually scratch bits off. so, whats the best method of stripping this? cheers. sam
  12. sambassman
    [quote name='lewyyy' post='1055083' date='Dec 11 2010, 04:16 PM']It could be a present to yourself! [/quote] i wish haha
  13. sambassman
    I WANT IT! christmas pressents have to be bought though (sad face)
  14. sambassman
    [quote name='tom1946' post='1050442' date='Dec 7 2010, 12:48 PM']My two are Korean and Indonesian and I really can't see/feel any difference? Oh wait, one's natural and the other is dark blue I suppose I'm not a good enough player to notice small nuances between basses.[/quote] im guessing that the korean ones are the older ones?
  15. sambassman
    [quote name='jezzaboy' post='1045702' date='Dec 2 2010, 09:43 PM']The tributes are great right out of the box. The neck is quite a chunky affair, more so than the stingray I had. I would say it`s like the neck on a 50`s reissue P bass. Good if you like that sort of thing. Jez[/quote] i think i need to go and try one cheers jez
  16. sambassman
    okay cheers chaps sam.
  17. sambassman
    [quote name='neepheid' post='1044942' date='Dec 2 2010, 12:41 PM']I hope the USA guys can align tuner backs in a straight line, they're a bit off on my Tribute. It's just the little bits of attention to detail like that which you'd hope the extra wedge would cover. The only other difference is more choice of finishes on USA G&Ls, choice of neck profile (the Tribute L-2000 only offers a quite chunky P bass like affair, which is fine if you like that sort of thing), other misc options like body binding. Oh, and as far as I'm aware, you can't get a factory fretless Tribute.[/quote] would you say that the neck on a tribute has a similar feel to a stingray neck? theyre quite chunky
  18. sambassman
    [quote name='Ou7shined' post='1044916' date='Dec 2 2010, 12:20 PM']To be honest there isn't all that much in it. You get G&L stamped hardware on the USA. The Tribute bridge leaves you in no doubt what model it is and the tuners are unbranded generic looking but the construction and feel is pretty much as good as the USA.[/quote] cheers
  19. sambassman
    [quote name='icastle' post='1044905' date='Dec 2 2010, 12:14 PM']Compared to what? [/quote] compared to eachother =P
  20. sambassman
    hiya chaps/chapesses iv been looking at the G&L L2000 bass and what a fine peice of equipment too. i realise that they use the same electronics in both basses but is the quallity much different between the pair? eg: tuners, neck, action? what do y'all think? cheers. sam
  21. sambassman
    [quote name='brummie' post='1017105' date='Nov 9 2010, 01:23 AM']Played but not owned, OK basses but over priced in new and second hand market. Don't really understand the point of a tribute bass. Higher priced than a Mex Fender for the quality of a decent Squier - IMO. CHEERS[/quote] okay cheers brummie
  22. sambassman
    does anyone owne a G&L jb2? what are they like? cheers sam.
  23. sambassman
    welcome liam! im not actually a manc but im only half an hour away! haha plently of locals eh? =P
  24. sambassman
    whata beauty! great deal too! good luck with the sale mate sam.
  25. sambassman
    [quote name='Count Bassie' post='1010117' date='Nov 2 2010, 10:29 PM']No worries, thanks for the response. I'm betting it's going to be a nice sound though.[/quote] i think you'd get a very rich, beefy tone out of it. but im not sure if the high end would cut through the mix that well though. thats why i got the 2 x 10 cab
×
×
  • Create New...