ash

A lot of bass for not much money. If I were playing long scale basses I’d snap this up. Bargain!

A nice portable powered speaker cab, handy as a monitor, vocal PA or keyboard/instrument amp. The neutrik locks on the inputs have broken but the inputs work using a jack. The connectors can be replaced - they cost under a fiver. Works as it ought to - it’s been used lightly as a keyboard amp and monitor so has some scuffs and cosmetic blemishes to the grill. They cost around £365 new. I can post in the UK only for £16 Yamaha blurb - Description The DBR10 Active PA speaker features the same Yamaha state-of-the-art DSP technology inherited from its predecessors, ensuring superior performance and versatility, and safe, consistent operation. The DBR10 can project deep bass, clear midrange and accurate high frequencies to the outer-most edges of a very wide coverage area and can boast 700W of power. The design incorporates an optimised 50° wedge angle for floor monitoring use and is also, for its size, the most portable powered speaker currently offered by Yamaha. Features Equipped with: 10" + 1" Power: 700 W Peak, 350 W RMS Peak SPL: 129 dB Frequency range: 55 - 20,000 Internal 2 channel mixer with XLR, TRS and RCA inputs 4-Stage fan Monitor tilt 2 x M8 Rigging points Dimensions (W x H x D): 308 x 493 x 289 mm Weight: 10.5 kg Tech spec Speaker type - 2-way, Bi-amp powered speaker, Bass-reflex type Frequency range (-10dB) - 55Hz - 20kHz Nominal coverage H - 90° Nominal coverage V - 60° Components LF - Diameter:10" cone, Voice Coil:2", Magnet:Ferrite Components HF - Diaphragm:1", Type: 1" throat compression driver, Magnet:Ferrite Crossover - 2.1kHz: FIR-X tuning™ (linear phase FIR filter) Output power - Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) Maximum output level (1m; on axis) - 129dB SPL I/O connectors - INPUT1: Combo x1, INPUT2: Combo x 1 RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1 CH2 Mix) Processors - D-CONTOUR: FOH/MAIN, MONITOR, OFF Heat dissipation - Fan cooling, 4 speeds Power requirements - 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz Power consumption - 60W(1/8 Power Consumption), 18W(Idle) Cabinet material - Plastic Finish - Black Handle - Top x 1 Pole socket - 35mm (Bottom x 1) Dimensions: -W - 308mm (12.1") -H - 493mm (19.4") -D - 289mm (11.4") Net weight - 10.5 kg (23.2 lbs)

G&L Fallout Fullerton Deluxe Bass USA Launch Edition This is the second of my G&L Fallout basses. It is in the very limited launch edition Racing yellow finish with competition stripes. I would like to sell one of my bases to fund new PA gear so no trades, sorry. This one is in what the band call the Kill Bill finish and is indeed a killer bass. It is in excellent condition and comes with a Fender gigbag. It’s a short scale instrument that has a slightly larger body so easier to get used to if you are a long scale player. It’s light weight at 3.9kgs and very easy to play with a nice action. The rosewood board is lovely and the neck has some great figuring. Note there is no G&L paperwork with this one. There is also a small cosmetic ‘bruise’ at the upper edge of the body near the competition stripe. Hardly noticeable and not an issue that affects playability. Pickup preferred but I can post in the UK only if necessary at buyer’s cost. One of the two I own is to go so I’ve dropped the price. From G&L - G&L Fallout Short Scale Bass (Launch Edition) Racing Yellow with Competition Stripes G&L Magnetic Field Humbucking Pickup Alder Body Hard Rock Maple Neck with Caribbean Rosewood Fingerboard CLF/G&L 1 5/8" Slim C Neck Profile with 9 1/2" Radius 30" Scale Length Medium Jumbo Frets, Jescar 57110 18% Nickel Silver Custom G&L "Ultra-Lite" Tuning Keys with Aluminum Tapered String Posts Leo Fender-Designed Bridge, G&L Saddle Lock with Chrome-Plated Brass Saddles 3-Position Mini Toggle for Parallel/Split/OMG Pickup Modes Master Volume and Tone Knobs The new Fallout Bass Launch Edition is available in three exciting colors decked out with racing stripes. This 30” short scale powerhouse features a G&L Magnetic Field Design humbucking pickup controlled by a 3-position mini–toggle switch for parallel/split/OMG modes – just like an L-1000 – bringing anything from modern to old school tones to your fingertips. What’s more, players used to a traditional 34″ scale will find this pint size puncher super easy to play.

I’m selling my Fender JMJ Mustang. It’s a Roadworn finished bass but as new. There’s a lot of praise for these instruments - justifiably so as this is just like picking up an old mid 60’s bass that feels worn in and ‘just right’. The bass weighs around 3.6kgs and is set up with round wound D’Addario medium gauge strings. The bass has a really punchy Mustang split pickup and stock Hipshot lollipop tuners. The aging process has been tastefully done and the fretboard is lovely with rolled edges. The board has been lemon oiled and feels great. It comes with tags and Fender original gigbag. I have the original box so I can ship in the UK if necessary at buyer’s cost of £25. This is a backup for my old 70’s Fender and has not been used - I want to buy a powered sub for my PA and this or my G&L need to go to fund this. Sorry no trades.

Fender Japanese Mustang Bass 2008, classic cream white and tortoiseshell livery. I have two of these little basses and a JMJ. This one has been my back up and rarely played. As a result it’s near mint apart from a small ‘bruise’ to the finish. The neck on this is slimmer than the original Mustang basses and the recent MIM and Squier editions. These Japanese models are highly regarded and don’t come up very often in this condition. The bass comes with a generic gigbag. The bass is very light at around 3.6kgs. It is strung with 40-100 DR round-wounds. Plays and sounds great as you’d expect from a MIJ Fender. No trades sorry, pickup preferred but if necessary I can post in the UK at buyer’s cost.

Markbass CMD 121H Bass Combo Made in Italy I recently purchased this from Lloyd on this forum, it was intended to replace my old CMD 121P that had developed some issues however my local tech has managed to repair my amp and so this is now up for sale. The reason I’m selling is because this model is slightly bigger and heavier and mine is easier to store. I’m selling it for what it owes me including the new MB handle I purchased and fitted and the delivery costs. Pickup only please. It’s an absolute bargain for a superb Italian made Markbass combo. Very good condition, some scuffing to the carpet covering, it hadn’t been used for some time prior to my purchase of it so the controls are a little scratchy. No trades UK only. Specs from Markbass - A more “hi-fi” alternative to the Mini CMD 121P, thanks to its larger size and 1” compression driver and custom horn. Easily upgrades to a 500W rig with the addition of a New York 121 or Traveler 121H cabinet. Designed for bass players who need power, portability and top performance. AMP OUTPUT POWER 500W RMS @ 4 ohms / 300W RMS @ 8 ohms PREAMP solid state FREQUENCY RESPONSE 45 Hz to 20 kHz CROSSOVER FREQUENCY 3.5 kHz SENSITIVITY 99 dB SPL WEIGHT 35.27 lbs / 16 Kg WIDTH 15.35 in. / 39 cm HEIGHT 23.03 in. / 58.5 cm DEPTH 18.31 in. / 46.5 cm

G&L Fullerton Deluxe Limited Edition Fallout Bass USA 2019 First edition version of the G&L Fallout bass. This one in a fetching Miami Blue with racing stripes. It comes with original G&L gigbag, build certificate and Allen keys. It’s a lovely bass and weighs around 3.8kgs, nicely balanced and easy on the shoulder. The bass has been recently set up by my local luthier and the frets levelled - it plays really well and is sporting D’Addario nickel round wounds 45-100 gauge. The Fallout is a shortscale bass but retains the proportions of a long scale instrument. So if you are tall or a larger person it doesn’t look like you are playing a toy! I am playing so rarely now I don’t need such an expensive back up bass. Condition is excellent. The only blemish being a tiny chip (chip in finish now touched up see last pic) at the underside of the neck pocket done when the neck was removed. The neck pocket is super tight - probably why it got chipped. Usual superb G&L construction. The fretboard and neck are lovely. Electrics are passive with the classic MFD pickup. There are some great demo videos online with The Bass Whisperer. Don’t mistake this for the Tribute model this is the full fat Fullerton version. No trades. I can post in the UK at buyer’s cost. I’ve dropped the price. I’m taking a hit on it so no further reductions and it will be fleabay bound. I need some work doing on my house so it has to go and I seem to be playing my old Fender Musicmaster now.

SWR Bass Monitor 12. An 8 ohm 250 watt cab with tweeter and level control. You can use it as a main cab, extension or wedge monitor. It’s a bit scuffed but works perfectly well and has the original speaker. It’s a bit awkward to box up owing to the shape for a courier and it weighs around 17kgs so pickup may be best unless you want to send a courier. UK only. The cab is one of the original SWR units before Fender and things started going wrong for the company. A decent cab at a cheap price. £80 PS can post but it will be around £25 Parcelforce.

Trade offers need to be sent by PM only please and no sorry, I am no longer playing long scale basses and am only interested in the short scale instruments specifically mentioned. All the best.

Since I bought my US G&L Fallout this Mexican made Mustang PJ has been unplayed. It’s a lovely bass in near new condition. As you can see it has been upgraded with a Hi-Mass brass saddle bridge and tort guard. The heavier bridge helps the bass balance when on a strap as it is very light. It’s a special edition in canary yellow and yes I also have the original white scratchplate that I will include. I bought it a few months ago from my local music shop and it plays and sounds great. It’s around 3.7kgs in weight. There is no case or bag so pickup preferred. Postage in UK at buyer’s cost.

Pm sent

1978 Fender Musicmaster Bass in black original finish. Made in USA. This is a lovely shortscale bass and is in great playing condition with plenty of dings and wear to the body. It’s light and easy to play and has plenty of mojo. The pickup is original however the pots and jack socket have been changed. The scratch plate is also a modern replacement as the original is badly damaged. I can include this in the sale. Other modifications are a couple of replaced screws on the back of the tuning gears and a brass nut - fitted before I bought it. A nice old Fender bass that is becoming more sought after. This one is light weight at around 3.8kgs and sounds nice and punchy. No case included. Pickup preferred but I can post in the UK only at buyer’s cost. No trades. Selling as I’ve just bought another G&L Fallout.

obbm - the original SB14 neck was sold on to another member

Trust me it’s a nice one!

I’m pitching it for what I paid. I’ve seen them go for higher prices but I just want to move it on.

PM’d

Another of my long scale basses for sale - this time a Samick era Korean Squier Jazz from around 1989/90. The neck is very nice on this one with no dings other than a couple of chips at the headstock. Neck pocket is super snug. The trussrod works both ways. Hardware is original. The body of these instruments were ply I believe and some were very heavy. This is fine at 4.3kgs. Same as my JV Jazz from the early 80’s. Some cosmetic dings and scuffs to the finish. The bass has the Schaller licensed tuners and the bell shaped control panel that was an odd feature of these Samick made basses. It’s a great solid workhorse of a bass and perfect for modding. This one is all original except for the added thumbrest which I left it on because there is a permanent marker outline underneath it. Pickup preferred as it doesn’t have a case. I can post at buyer’s cost but only in the UK. Sorry no trades.

Pm

This is a Sterling SB14 body with a maple USA EBMM Sterling neck. I bought the neck from eBay and the SB14 from this site. I was looking for a candy apple red bass with a maple board neck but couldn’t find one so I built my own! This has been my main gigging bass for a few years but owing to fretting hand issues I’m now selling my long scale basses. I’ll regret this as I’ve invested quite a bit of gigging life into this one but it’s now gathering dust. The bass has Hipshot tuners and a drop D tuner fitted. The active electronics sound as good to me as my full fat US Sterling bass. It’s light at 3.9kgs and plays really well. There is a scratch at the top edge of the neck near the fretboard - I thought it was a hairline crack but my luthier said it was nothing to worry about. See fifth picture. It comes with the installed Armstrong black scratchplate and the original white one. There is a Sterling gigbag included. No trades sorry. I’d prefer pickup but can post at buyer’s cost UK only.