Jump to content
Why become a member? ×

paul_5

Member
  • Posts

    8,154
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by paul_5

  1. Classic Mike! I’ve been in studio sessions that used one as a room mic for drums etc... great sound!
  2. I played Hohners for a while (30 year’s ago) and got rid because they were TOO thin, so that might suit you.
  3. It’s been a while since this guy’s been mentioned, so here we go...
  4. How would they react to being told to f**k off?
  5. I’m using a Donner DP2 from Amazon - cheap as chips and will power the DHA as well as all my other pedals. Obviously I’m using the voltage inverter, but it’s fine and noise free - the only issue is that the brick won’t power up with the DHA attached; it doesn’t like seeing a huge current drain on startup, so I just wait until all of the lights come on, then plug the DHA in and it’s fine.
  6. They sound better with a 12v supply, but will run on 9v quite happily. Either 9 or 12v, at least 500mA and centre positive (unless it’s one of the newer ones). These pedals need a hefty amount of current, so 500mA is a comfortable amount.
  7. This. It’s another argument for no back line and in-ear setups. I’ve let other bands use my cabs in the past, and have always sought permission beforehand, and I don’t *really* mind someone using my head if they’ve suffered a breakdown during soundcheck or the gig, but someone who ‘forgets’ kit can ferk right off.
  8. I love John Frusciante’s tones - single coil pickups with a smattering of gentle compression and a valve amp just on the edge of overdrive. If it’s just the neck pickup then so much the better. Effects wise I love the whacky stuff that Tom Morello does with his Whammy Pedal, and anything through a rotary cabinet. The Edge made some of my favourite guitar based noises on Achtung Baby too. My philosophy is ‘if you’re going to use effects, use them ALL!!!’ Least favourite would have to be early rock and roll stuff with that god-awful delay.
  9. Yes it is, needs a high gain preamp though, as the output is tiny!
  10. Electro Voice EV20 is a great mic for voice over work too.
  11. My preferred pickup configuration. Looks nice!
  12. For folk wanting the Slonimsky pdf there's a pdf version here: https://ia803000.us.archive.org/24/items/nicolasslonimskythesaurusofscalesandmelodicpatterns/Nicolas Slonimsky - Thesaurus OfScales And Melodic Patterns.pdf
  13. That body design is great for someone with short legs. The bridge has a couple silly points though.
  14. There's a whole lot more to Britpop than Oasis though; Blur (in particular Graham Coxon) have always been a really creative band - check out their albums from around the mid 90s! Suede also had some great tunes, as did Sleeper. I lived through it in my early 20 (my peak 'going out' years) and yes, Oasis were everywhere, and were boring.
  15. And Sly Stone in his vocals.
  16. I’ve never needed a spare bass in nearly 30 years of gigging. I used to go out with a couple of basses ‘just in case’, and occasionally I’ll take a second bass for a change of sound (mostly it’s fretless Jazz, but occasionally it’s nice to dig into a P with flats) depending on the band and the set list. These days it would be nice to have a gig to go to; my first one of the year is in July!
  17. Glad to hear you’ve taken your first steps in Zappa’s immense (and intense) body of work. as a newcomer I’d recommend: Broadway the Hardway Apostrophe Sheik Yerbouti as the most accessible ones. The Yellow Shark Project is worth a listen too - FZ’s masterpiece of orchestral writing.
  18. I watched a video of one of these the other day - sounded great!!
  19. A preamp should be able to do both. whether you choose to use it to just change the eq, and set the output to match bypassed signal is up to you. I’ve got a Dave Hall valve unit that I used to use as a preamp direct into a power amp - much like other BCers who run into the effects return socket of their amp; these days I just use it as an overdrive pedal, so I dial back the volume and that’s what it is. Tone shaping is much easier (and safer) to do in the preamp stage, as the signal is significantly smaller (typically less than 1v) when compared to the signal coming out of the power amp stage, so that’s why it gets done at that particular part of the amp.
  20. Oof!! These are one of my top 2 drive pedals for bass. If I didn’t have the other one I’d have had this in a heartbeat. 😄
  21. Put me in mind if a Pearly Queen. and not in a good way.
  22. Could’ve as simple as a dicky switch - it’s a mechanical device as will fail eventually!
  23. Everything’s worth repairing!
  24. There’s a little plastic cover on the headstock; it’s under there. 😄
  25. I’m no Derek Smalls, but...
×
×
  • Create New...