Jump to content
Why become a member? ×

bassist_lewis

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    792

  • Joined

  • Last visited

 Content Type 

Everything posted by bassist_lewis

  1. bassist_lewis
    I ordered mine last week, so will report back when it arrives. I've had the original Jive for a couple of years and love the low gain settings.
  2. bassist_lewis
    I have the Black Vehicle and it's up there with the best. Very transparent and loads of tonal options with the boost switch and the pre/post gains.
  3. bassist_lewis
    Bass Blasters are pretty hard to come by these days! Are they worth the hype?
  4. bassist_lewis
    I've played SS exclusively for almost 10 years now, and I've always used 30" scale strings. LaBella make a special Mustang set for through-body stringing, which I guess are similar to 32" scale strings. In terms of winding round the post, it doesn't matter too much with the D and G, but make sure that only the narrower part at the top of the string (where the silk is/would be) goes around the post for the E and A.
  5. bassist_lewis
    That's some impressive Tetris-iing!!
  6. bassist_lewis
    bought a 3Leaf Octave Mini. Posted very quickly and arrived the next day. Quick replies to messages. Easy deal!
  7. bassist_lewis
    I've been curious about Atelier Z for a while. People talk very highly of them, I'd love to play one. I like the look of this one but I have an aversion to mustangs with bridge pickups. Plus I'm low key saving myself for a Wilcock 4P-51 (once the wedding is paid for).
  8. bassist_lewis
    Not after a gig but I'd had three school shows and a parents evening that week so I was definitely knackered 😅
  9. bassist_lewis
    A 4p-51 is on my list, but alas I have a wedding to pay for. GLWTS
  10. bassist_lewis
    No reason other than its particularly good pic of my Wilcock Mullarkey on the couch.
  11. bassist_lewis
    Something to consider is that the 2 One10s will be taller, so the speaker will be nearer your ears than the Midget. Of course if you don't like the tone it doesn't matter, but it will likely sound and/or feel louder.
  12. bassist_lewis
    Does the colour of the tape match the colour of the pedal?
  13. bassist_lewis
    I seem to remember my JMJ came with a set of Fender flats and they fitted fine. They were pre-installed so I couldn't tell you exactly which ones they were.
  14. bassist_lewis
    how's the CMC Prototype? Been tempted but one for ages.
  15. bassist_lewis
    it would be her first pedal... Also, I believe this came in between the Mk 1 and Mk 2 as a more 'conventional' octave pedal, without the solo octave function.
  16. bassist_lewis
    If I wasn't planning a wedding right now...
  17. bassist_lewis
    That has happened before, but it also happens when I'm at home just plugged into my amp. I re-wired my board so every pedal has isolated power and no noise so far 🤞
  18. bassist_lewis
    I have not tried it with a separate supply. I will try it, but its very unpredictable when it happens. I have also noticed I've wired some of the the pedals from the distributer (not isolated), so I'll rewire them to an isolater and see if that stops the sound. Cheers!
  19. bassist_lewis
    I thought it was a power thing. I'm using the Gigrig power setup. The tuner is connected to a high power adapter (needs 300mA), which is connected to the Distributer. This is how Gigrig recommends you wire it up.
  20. bassist_lewis
    In as new condition, I think I've only gigged it a couple of times. Comes with the original box and extras. Would consider a trade/part-X for an interesting octave pedal. £5 postage to mainland UK. Poison Noises The Crook v.1 - £100 Fulltone OCD clone, but with bass control
  21. bassist_lewis
    I have a Walrus Audio Canvas tuner on my board. Works perfectly well 90% of the time, except every now and again when I engage it to tune then disengage it, there is a high pitched tone when it unmutes. The noise goes away if I stamp/kick it (not the foot switch, literally stamp on the enclosure). Anyone with a background in electronics know what's going on? L
  22. bassist_lewis
    My band are playing the Edinburgh Blues and Jazz Fest next week for any local BC'ers: https://www.ejbf.co.uk/artist/flam
  23. bassist_lewis
    I used a Mesa D800, so 400W at 8 ohms, so 2/300 at 12 ohms?
  24. bassist_lewis
    If I was to get a One10W I'd want to be able to use it on its own, for those small gigs. I used to have a One10 and it was surprisingly loud for its size, but it wouldn't be much use to me if it was only useable with the Three10.
  25. bassist_lewis
    How would that work when using the One10W on its own with an amp rated at 4/8 ohms? Would it just reduce the output?
×
×
  • Create New...