fretmeister

The legal position is very clear. You can put any logo on your own instrument. You cannot sell that instrument, even with a disclaimer, as that is selling a counterfeit. No ifs or buts. Disclaimers do not change the status of the item. The item itself, at the point of sale or beyond is liable to confiscation and destruction. The intent of the person selling is irrelevant to confiscation / destruction (hence disclaimers not having any effect at all as to the status of the item) as it is the item itself that is counterfeit. The intent of the person only becomes an issue if they knew they were selling counterfeit goods and that can open the person up to liability for a simple refund or worse if it looks like a business. Fender own their own IP and get to decide who can use it through licensing arrangements. Fender do not sell logos individually to the public. Every logo you see that is not on a genuine Fender product, or is still on the waterslide sheet is a fake logo. Obviously Fender go after the big producers of counterfeit instruments rather than little guys like Limelight but there is no doubt at all that Limelight are breaking the law if they don't have a licensing agreement with Fender to use their logo, and anyone who sells a Limelight onwards is doing the same. Several other, larger forums have an outright ban on all counterfeit instruments similar to the Ricky ban here. I know of one forum where they got proper legal advice on the point and then made that change as the owners of the forum were concerned about being dragged into any litigation by an IP holder (like here for Rickys). So the OP's poll is missing a bit really - in all circumstances it turns what might well be a fantastic instrument into a counterfeit one and at risk (no matter how small) of being seized and destroyed.

I've had a variety of small cabs before and my favourite was the Barefaced One10. I had a pair for a while and gigged them. At the time they were the very lightest cabs - I'm not sure of GR now make an even lighter one, but I have no experience of how they sound. The One10 has quite a traditional sound. I only sold to get a Super Twin - sometimes wheels are just easier!

Those Aguilar P pickups are some of the most realistic / trad sounding P pickups there are. They are very middy, but so were original P basses. They do react beautifully to a passive tone control though, the treble gets reduced but the bass doesn't ever get too muddy. Fantastic for just about everything apart from modern metal I reckon - But at the same time they work in the mix and sound a bit honky when playing alone.

That's what it looks like to me. The American Specials didn't have the Badass and did have it mentioned on the back (IIRC) of the headstock.

That's quite depressing.

I’ve had the One10 cabs and loved them, then needed something bigger and now have a Super Twin and really love that.

Well, I do need a 5 string to place the soon to be on sale Stingray 5 I have. So yes. Kind of. I do have another 5 but that has flats on it and I could do with a roundwound option without changing strings. Ahem.

I need one. Ive decided.

Why not just ignore the B rather than take it off? You'd have to faff with the truss rod etc without a string on it.

I really like the M900 but I can't really keep 3 (marital harmony and all that) and these days I'm playing more and more clean-ish sound stuff. Far more Duck Dunn than Billy Sheehan now!

Low is at 55Hz.

So far it's been silent - the manual says it only comes on when it needs to and I've had a good 30 minute thrash in the house until my teenagers got upset! I don't like fan noise either.

It has loads more low end than the Darkglass. Very impressive.

Not really. When I play without a ramp my finger hits the string at about 45 degrees. So not flat with the board like a plectrum would, and not a vertical impact like slap. A ramp changes the angle of attack - it's like pulling your finger across a flat surface and there just happens to be a string in the way. It's very much a horizontal interaction with the string. If you look at different players fingers, without a ramp the plucking finger comes to rest against the next string, sometimes causing a bit of a thump and the joints are all are gently bent. With a ramp the next string doesn't need to be touched at all and the finger geometry is a bit different (for me anyway) in that the proximal phalanx stays straighter with the main part of the hand, and the middle phalanx bends down more to allow that more horizontal movement. It does need a bit of technique adjustment - just hammering away like Steve Harris won't work with a ramp - the angle of approach to the string is different. It's easy to try - bit of old smooth wood and double sided tape. Don't worry about curving the top, just get the idea. It's definitely not for everyone, but I like it.

My little Tonehenge I got the VT500 in the Thomann blow out. £159 + vat and courier charge. Amazing price. Only had a 5 minute play to see if it all worked ok and it does. It's very different to the Darkglass and the Markbass. It actually has higher OD gain levels than the DG - gets a bit noisy when cranked fully and with the Character all the way to the right (and with a compressor in front) but it's a great sound. The thing that really surprised me though was the almost complete lack of noise when using a clean or lower gain sound. No hum, no fan noise (reactive fan control! at last!), just quiet. Perfect for playing with woodwind instruments. I used to do that a lot before the plague. Input gain appears to be very high so even on a loud passive instrument it's better with the Pad engaged. I'm looking forward to going through the Sample Settings in the manual later on. Also hoping that my big band manages to start up again in September!

I like them. I don't have them at the moment, and I don't need them, I just find them very comfortable. And I'm not convinced that Gary Willis or Billy Sheehan could be accused of having poor finger technique and needing a crutch.

Yes. Just like all those DB players playing over the fingerboard. Clearly a crutch.

@Stealth Dunno if This is your thing, but it's cheap - has to be ordered though https://www.andertons.co.uk/bass-dept/bass-amps/tc-electronic-bass-rig-bundle-bh800-amp-head-k410-cab

Assuming that already has a great monitoring system... just a Helix. (And I'd remember to get my jeans over the top of my cowboy boots).

I love the SH1. I can get any sound I want from it. Lovely old RnB all through to modern metal. If it had a compressor in it (and ideally a 9V battery option) it would be perfection.

That's a bit crap - especially as you ordered before I did (I only went for the head).

As expected from UPS my delivery today has been delayed until tomorrow. Ah well, I have too much work to do today anyway!

I nearly bought a heritage Ampeg when they first came out... 84lb No frakking way.

Thanks. I'll stick it on the list!

My word that looks heavy!