cheddatom

Yeh, I really like it there, it has a great stage and a cool atmosphere, even when there's no-one there! What's your band?

It's just a 1 x 15". I was DId and I got him to low pass that, and mic up the 2 x 12".

[quote name='beerdragon' post='59141' date='Sep 12 2007, 10:49 AM']Who's using the Peavey cheddatom?[/quote] Me, and the Johnson 2 x 12" you see to the right of it.

I like this picture 'cos you can see some of my board, and my bass looks great! Anyone else play the Limelight in Crewe?

I've deffinitely seen them on Ebay, but don't know anything about them!

How much do you need to raise them by? Maybe you could just put a double layer of velcro down. Otherwise, wood has to be the way to go I think. You need a material that you can cut at home, that you can get thick enough, and that you can glue velcro to. Wood!

I'd say that's good advice! However, I received the same advice "change your technique" when I went to see a physio clinic thing about an RSI in my wrist. I really can't think of ways to change the way I play that will benifit my wrist. Are there websites around? Or tutorials and things? I have been playing quite a long time, and used to teach guitar, and thought my bass techniques were ok but..... obviously not.

Interesting. I just downlaoded a Gary Newman & Tubeway Army Greatest Hits! I haven't really heard any Gary Newman before, but I love "Music for Chameleons" the song. I know it from the Alan Partridge DVD menu. I may investigate your suggestions further, seeing as I don't listen to enough music.

[quote name='bass_in_ya_face' post='58297' date='Sep 10 2007, 04:57 PM']I tihnk you'll find that was 'Music For Chameleons' by Gary Numan....Pino Palladino was playing with him about that time, not sure if it was him playing[/quote] Thankyou very much! I'm downloading it as I type.

[quote name='Bald Eagle' post='31946' date='Jul 15 2007, 12:02 AM']Funny that, I'd rather tame tigers for a hobby anyday than perform a Mark King solo, Live! The only one I can think of is Alan Partridge playing the airbass does that count [/quote] I know this might seem stupid to those of you who know what i'm talking about, but, what the hell is that funky bassline that Alan's airbassing to? I really want a copy of that song/album.

Yeh, I think swapping it is going to be the best bet. If your set up is noisless without it, you shouldn't have to buy a noisegate. I have a noisegate as my set-up has always been noisy due to high gain and cheap pedals etc.

[quote name='dlloyd' post='58139' date='Sep 10 2007, 12:32 PM']Would something like a noise gate do anything to get rid of the hiss?[/quote] A noise gate will only get rid of noise when you're not playing. If it's hissing at the same time as you playing, you would need some kind of advanced noise reduction dealy, and as far as I know, that doesn't exist in pedal form.

So basically, I don't really NEED the crossover feature on an amp. I think I need to spend a bit more time with my amps now! Ta.

[quote name='Alien' post='57239' date='Sep 7 2007, 11:20 PM']If I'm reading this right, you're not truly bi-amping, you're just taking the high frequency output into the guitar amp. The Peavey combo is still running full range. If you take a patch lead from the low frequency output into the power amp input, then the Peaveys power amp will only be handling lows. My setup used to be similar to this, just a bit more complicated: Bass - Peavey Firebass - HF out - Korg AX300 (stereo outs) - Behringer EP1500 - pair of 2x10 cabs [color="#FFFFFF"]Bass - Peavey Firebass[/color] - LF out - Firebass Power amp in - 1x15 cab Loads of big fat clean bottom end, with all the FX in stereo on the highs. Totally unnecessary and way OTT, but lots of fun nonetheless Andy[/quote] Ahhh, that explains why the TE still kicks out some highs. I'll try that later. Building my own cab now sounds very attractive! Maybe I could make a new cab for the 18" in the TE cab, and carry that to gigs. Are there any other manufaturers that do the bi-amp/crossover thing?

Nice board man. I know it might take a while, but i'd like to know what's on it?

[quote name='The Funk' post='57075' date='Sep 7 2007, 04:36 PM']Well, if the crossover on your Peavey combo has a Lo output, you could run that into your Trace Elliott cab. The thing is you'd need to amplify that signal with a power amp in between the Lo output and the Trace Elliott cab. A power amp is a dedicated unit which is basically the second half of a normal amp. You don't really need to know how it work, just that you'd need one between the Lo crossover output and the TE cab. If you did it that way, your Peavey amp wouldn't clip as the TE cab wouldn't be powered by it but by a seperate power amp.[/quote] I see, that makes total sense now. I did think about that before, as obviously i'm not using the TE cab to it's full potential. bass_ferret - I'm sorry dude, I really don't know what you're on about. I don't know what number is on my amp. I know that it's a combo that is newer than the one in Phaedrus's picture, has a bit more colour on it, is 150W on it's own, 200 or 220 with the ext cab, and it has a BW 15" speaker. It's not a "Combo 300". You're the first one to mention this model. What is it? I have some DIY skills, but have never even thought of making my own cab. I'm guessing it's far beyond putting up some wonky shelves.

I would have whatever I could get the sound I wanted with. If I could afford the kind of rack gear i'd need, and I had the time to program it, and I had a floor controller, then that'd be fine. At the moment, gigging with a massive board is also fine. I there are issues of practicality and cost, but not really sound, which is the main thing at the ned of the day!

[quote name='Phaedrus' post='57062' date='Sep 7 2007, 04:15 PM']Peavey TNT150BW? 150w on its own, gain & volume controls, 9-band graphic, low & high controls, punch & brite switches, built-in footswitchable chorus (depth & rate controls), amp out, speaker out, variable crossover, Black Widow 15" speaker. Rock solid. F*!king heavy. What do you mean you already have one? [/quote] Ok, I have the same thingy, but without the chorus. It's not powerful enough! The Funk - Yes, that is my rig, plus 20 pedals. What did you mean by "You could get a power amp and run the lows out of the low crossover output on your Peavey combo to your Trace Elliott cab."? Either i'm a bit thick or that doesn't make much sense :-/

I've never played a rig that has satisfied me, apart from my own. I can't sell the TE cab, it's way too cool and adds the deep lowness that I really want. I use it in the studio, or at big gigs where the other two band members don't mind driving. Maybe I should get a very loud head and a 1 x 15" like you suggested. That way it should be a straight swap for what i'm using, but louder. Hopefully! Does anyone else have this style of bi-amp rig?