Skinner

My advice is when you first gig with it just go fretless! you will overcome.

Are the ratings the same? ie Ohms and handling power, if they are then it should be a straighforward swap and a good move (in my opinion).

Screws can work loose from graphite instruments/components, my experience is same as obove regarding wood (not had any loose screws) -no pun intended! Are they definately tightening up and not 'stripped' the wood!? You could try a mix of wood shavings and wood glue or cascamite is pretty good-make up a paste, fill holes let dry thoroughly then re-drill.

I suggested card because it's nice and easy to cut to shape with scissors or a knife-so less work (for that stage at least!)

Pleasure to deal with, great comms, smooth transaction. Cheers

[attachment=146409:Zon Sonus Custom 003.jpg][attachment=146410:P1050739.JPG] Very happy chappy with my Zon Sonus's. Both formerly owned by fellow basschatters.

[attachment=146407:P1050739.JPG][attachment=146408:Zon Sonus Custom 003.jpg] Here's mine!

I find it helps to initially draft onto tracing paper then trace and cut onto card copies cut them out, refine as necessary and finally draw round the best one onto the plastic. Good luck.

Just purchased a pair of barefaced cabs with covers from Nick. A pleasure to deal with, cabs in excellent condition, this is a fellow who looks after his kit. Thanks again.