deanovw

That was copied from the Demeter spec. I think the old version had a bright switch and this new version has this mode switch. Apologies for any confusion. I have done no work to this amp as it is perfect as it is.

For Sale: Demeter – Minnie VTBP-M-800D Amp £900 + delivery at cost It is with some regret that I am putting this amp up for sale as it it a fantastic amp, but, I have at last managed to get an all valve amp and so this must go. It is immaculate and comes with a posh Roqsolid cover. If I had lots of money I definately would not be selling this. Trades considered: Nice Fender P Bass + cash either way Really small class D amp + cash my way. <p> [b] [size=4][color=#000000]Features[/color][/size][/b] [color=#666666][font=Cabin][size=3][size=4][color=#000000]All tube pre-amp circuitry Hand wired in the USA using High quality components, DC filament, full 280V high voltage supply. Classic passive tube tone controls Treble, Middle, Bass with frequency selector and presence with frequency selection.[/color][/size][/size][/font][/color] [color=#666666][font=Cabin][size=3][size=4][color=#000000]Replaced the original bright switch with new Mode switch that lets you control the overall tone: Dark, Normal and Bright. The unit has a pre-amp output if you need to run more amplifiers.[/color][/size][/size][/font][/color] [color=#666666][font=Cabin][size=3][size=4][color=#000000]A select Jensen transformer drives our 800 watt class D Amplifier. There are two Speakon combo jacks on the back to hook up your speakers.[/color][/size][/size][/font][/color] [font=Cabin][color=#000000]This amp does not have a DI out. I have never had a problem with this as I have a foot pedal with DI out and most PA companies have a DI box for bass.[/color][/font] [color=#666666][font=Cabin][size=3][size=4][color=#000000]The amp weighs 10.5 lbs and messures 13”wide x 5.5”high x 9”deep. Built in the USA in Barn in Templeton CA.[/color][/size][/size][/font][/color] [b] [size=4][color=#000000]Tone section:[/color][/size][/b][list] [*][size=4][color=#000000][b]Treble Control: [/b]The treble control gives 6 dB of boost or cut at 4 kHz (6dB per octave, shelving type).[/color][/size] [*][size=4][color=#000000][b]Middle Control:[/b] The middle give 6dB of boost or cut at 500Hz (wide Q, peaking type).Bass Control: The bass control gives 9dB of boost or cut at a selectable frequency of 60Hz or 120Hz (6dB per octave, shelving type).[/color][/size] [*][size=4][color=#000000][b]Presence Control:[/b] The presence control gives up to 12dB of boost at a selectable frequency of 2kHz or 4kHz (active type, 6dB per octave).[/color][/size] [*][size=4][color=#000000][b]Mode switch:[/b] Dark, is a high frequency cut fatting up your fundmental. Normal, flat opertion showing off more overtones. Bright, brings out the overtones on the dullest basses or speakers.[/color][/size] [*][size=4][color=#000000][b]Internal Volume Trimmer: [/b]This control is designed to match the output volume of the VTBP-M-800D with the sensitivity of any Bass.[/color][/size] [*][size=4][color=#000000][b]Optional, Studio Output: [/b]The VTBP-M-800Dm- features a mic level Jensen DB-E output transformer for a balanced studio output.[/color][/size] [*][size=4][color=#000000][b]Effects Loop: [/b]in/out line level[/color][/size] [*][size=4][color=#000000][b]Power Amp Outputs:[/b] Operating at 4 (800w), 8 (500w) or 16 ohm (250w). 1/4” & Speakon[/color][/size] [/list] [b] [size=4][color=#000000]Preamp Specifications[/color][/size][/b] [list] [*][size=4][color=#000000][b]Inputs:[/b] one instrument level 1/4” jack.[/color][/size] [*][size=4][color=#000000][b]Output impedance (line):[/b] > 1 kohm, (unbalanced)[/color][/size] [*][size=4][color=#000000][b]Minimum load impedance:[/b] 10K[/color][/size] [*][size=4][color=#000000][b]Input impedance:[/b] > 1megohm[/color][/size] [*][size=4][color=#000000][b]Maximum output:[/b] + 24dBV[/color][/size] [*][size=4][color=#000000][b]EQ gain :[/b] + or – 12 dB[/color][/size] [*][size=4][color=#000000][b]Signal to noise ratio: [/b]– 80dB[/color][/size] [*][size=4][color=#000000][b]THD :[/b] .5%[/color][/size] [*][size=4][color=#000000][b]Outputs (preamp):[/b] 1/4” unbalanced , Optional 3 pin XLR Direct out[/color][/size] [*][size=4][color=#000000][b]Frequency response :[/b] 10Hz to 40kHz[/color][/size] [*][size=4][color=#000000][b]Tube: [/b]1-12AX7a selected 1-12AT7[/color][/size] [*][size=4][color=#000000][b]Operating voltage:[/b] 115V or 230V AC[/color][/size] [*][size=4][color=#000000][b]Power supply:[/b] 280V DC[/color][/size] [*][size=4][color=#000000][b]Filament:[/b] 6.3 V DC[/color][/size] [/list] [b] [size=4][color=#000000]Power Amp Specifications[/color][/size][/b] [list] [*][size=4][color=#000000][b]Outputs (power amp):[/b] 1/4” Speaker & Speakon[/color][/size] [*][size=4][color=#000000][b]Output impedance (power amp):[/b] 4 ohm, 8 ohm, 16 ohm[/color][/size] [*][size=4][color=#000000][b]Output Power (power amp):[/b] 800 watt RMS @ 4 ohms, 400 watt RMS @ 8 ohms[/color][/size] [/list]

Pm'd

pm'd

Replacement wiring loom to convert the retro two10 from 4ohm to 12ohm is £30. Mine should be with me anyday now.

Barefaced sell a kit to convert it to 12ohms. 😉 [quote name='pbasspecial' timestamp='1442952978' post='2870954'] Love barefaced cabs. Would have had it if it were the 12ohm version. GLTWS. [/quote]

I'll take it. Will message you.

On hold, pending the usual.

SOLD I am listing my Thunderfunk TFB550. £600 inc shipping. UK mainland only It comes with the flight case pictured, the rack ears, carry handle as fitted and feet so you can re-house it pretty much anywhere. The amp is fantastic and I wouldn't be selling it if i didn't have to. I have just purchased something new and can't keep everything. 500 watts into 4 ohms 350 watts into 8 ohms I have used 8 ohm and 4 ohm cabs in reasonably loud pub bands and have always had plenty of volume left if required. Great tones available. I used it pretty much flat and it delivered every time. Hand made by Dave Funk in the USA. Any questions just ask. Pics:

Pm'd

Messaged