tauzero

I'd be inclined to open the casing (if you can) and instead of re-using the insert, get a flanged nut of the same thread size and put that in place of the insert with the flange on the inside of the case, fixed in place using Araldite, the goddess of repairs.

Not offhand, but I'm sure it was a decently high impedance for the piezo as I'm aware of that need.

The preamp may well be dodgy. I'm pretty sure that Bart preamp will be similar to a Bart preamp that was once fitted to my Sei - the pickups are wired direct to buffers in the preamp, then the two buffer outputs go to the blend control. It sounds as if something funny is happening involving a capacitor in the neck buffer, though I can't be more specific than that. The solution for mine was replacing the preamp (with a Delano Sonar).

And then use the rifle for relicing?

I use acetone for some things but I wouldn't use it on anything plasticy as it's an extremely good solvent (splashed a bit on a PC keyboard when I was removing sticky from some headless bridge tuners, I think it's still usable).

The cheap piezo bridges off Ebay were crap. I have a couple knocking around somewhere, I tried them and the sound was very scratchy, for want of a better word - no bass and the tone was very gritty and low fi.

That intonation looks a bit out...

Drummer could mic his drums up into a separate mixer and run the output from it into the main mixer, so he buys the drum mixer and drum mics. They might want different mixes for IEMs - there might just be one monitor output on the current desk or there might be a couple of Aux ouputs.

They are, and that's just the 8" ones.

I'm not sure that it is the fault of the bean counters. Fender (and, in the bike world, Harley-Davidson) have attempted the occasional innovation but they have been marketing flops as their core customers are utterly resistant to change.

It's just gear snobbery. I wonder how many avid Class AB devotees would be able to distinguish an AB from a D in a blind test. Assuming that the blind test didn't include picking the amp up.

The Alto TS408s that I use are (according to Alto) 2000W peak, 1000W RMS. I will say that they're mind-buggeringly loud if you're standing a couple of metres from one and the guitard plugs in a guitar that he hasn't set the volume correctly on.

Isn't the port that horizontal slot at the bottom? I had an idea that the bike park slot was some sort of speaker loading system, like horn loading but more primitive - @Bill Fitzmaurice would be able to answer that, he's done a lot of horn loaded designs.

If it does, it means it can be used by a leftie as well as a rightie.

Has anyone here tried any of the luminous acrylic paints?

Sei Flamboyant 5-string headless fretless with piezo bridge saddles feeding a GraphTech ghost Hexpander to 13-pin jack.

The top looks nice in the middle but it looks like someone has sprayed the edge in an attempt to hide something nasty.

Do they do Shitty Drummer 1.5 too?

New dishwasher coming tomorrow <checks clock> er, today. Replacement for the one which was being delivered on Monday but had a damaged door. Now, can I use expenditure on dishwasher as an excuse for expenditure on a bass, when I've seen something tempting?

http://bandwerkz.com/ I've managed to get 50% of the band onto it. One day maybe the other two will join too.

Can't be He Who Can't Be Named, he'd convert a 6-string bass into a 4-string for people with sausage fingers.

You should watch some of Glenn Fricker's Youtube videos on the SpectreSoundStudio channel - guitars rather than basses, but he has a lot of time for HBs and very little for gear snobs.

Grow your fingernails a bit, so they catch the strings as you pluck.

I don't mind my lot doing some things to help - take speakers off stands, fold stands up and put them in bag, put speakers in slip covers, coil mains leads (which have velcro ties and are colour coded with insulting tape for length). They know to leave me to coil the XLR leads (2 to FOH, 2 to monitors, 2 to mics, the vocalist brings his own XLR lead and mic). I don't bother with subdividing the leads case, XLR leads are colour coded (orange = FOH, green = monitors, purple = my mic) so easy enough to get what I want out at the next gig.

Must have put an extra zero on the end of the price by accident.