HazBeen

Yeah, 2 way adjustable is the way to go. Really all are fine, there aren’t too many bad ones around anymore. 620 or 630mm will do for most basses.

That is pricey!

All cabs have an In and Thru, so they probably felt 1 Speakon out on the amp was enough. Works for my setup, but clearly not everyone’s cabs will have a thru. Missed opportunity. Looks decent enough otherwise, but no GAS.

I think you will find this is the build diary section, which in essence = woodwork, sand and finish chat 😂

It plays well too, although admittedly the 30" scale I am not used to. It feels "small" but "easy".

So quick one taker with Tone closed (the first) and then half open (2nd bit). Sounds very P to me.....mini P Bass into Scarlett Solo into Ableton Live, just a virtual amp/cab and no further processing Mini P.mp3

FFS ..... okaaaaaaaaaazy. Hold on to your horses 😂 Will sort something soon.

Pretty much none. The very small head, light tuners, big upper horn (relatively) and heavy-ish bridge work thankfully,

At 46 I can’t say I am a spring chicken anymore (nor over the hill), but I still actively look for new music/bands/musicians to get into. So I was rather amazed to find that my band mates, all a few years my jr, all said they did not do the same and that they in essence felt that hardly any music that was worth their while is being made today. It certainly takes more effort to wade through the muck, but there is still good stuff being made by young guns. Makes me wonder what my BC community thinks. Are you still open to “new”?

I find myself listening to Spiritbox quite a lot, like now.

So I take it nobody likes them? 😂

I bought one too, cheap as chips so worth the punt. Indeed very transparent which I like a lot. My channel A and B are identical i(to my ears), solid EQ points in my opinion. Also not unhappy with the compressor, very clean, if I happen to forget my Keeley it would do.

For the record, it weighs 2.9kg. Pretty happy with that.

Nut needs some extra work as E and A are too high, amazingly it is already quite playable. An hour so to fettle/tweak and what have you and we should be golden. Basschat meet Big Red 😂

Result! Now to make a nut and finish this bad boy...

All my builds I want to be under 4 kg, the swamp ash I have is really light so 3.6/3.8kg I expect to end up at. Oil finish for sure.

So up next will be a modern 5 string. - 35” scale - 24 frets (may opt for 21) - 2 active EMG MM pups - passive EQ VVT (may put in a preamp) - Black hardware - 18mm string spacing (single string bridge) at bridge - brass nut (10mm spacing) 50mm wide - swamp ash body with a tbd top (walnut likely) - maple neck, bolt-on - wenge fretboard (most likely) - I quite like scalloped headstocks, so will probably go with that Will be doing a full-size drawing in the next weeks..... old school style

Btw, bridge installed....

Cover, take 2 . 2 more coats and we are golden.

Not giving up just yet

It clearly wanted to go, literally exploded when I went from 6 to 10mm. The new one is already drying Tung coat 2.

After 4 coats of Tung, I had left it for a day extra to cure and am now slowly but surely putting it together. Also had the control cavity cover split on me along the grain whilst drilling holes for the pots. Ah well, I will have to redo it (and redo 4 coats of Tung) and it will be fine. Some selected pics for you to look at whilst I have a little cry in the corner

+1 and indeed, so much quicker than a radius block. @spacecowboy, is there a built in stop to prevent rolling off the side? I made a similar radius jig a few years ago that I made quite wide to prevent mistakes from the router sled rolling off the side. Your is much more compact so keen to learn how you tackled it.

Very cool indeed!