Chenzman

I did see some on eBay however were too short and was worried they wouldn’t fit. Turns out I ended up damaging the board so thankfully was able to convert it

Thanks for the offer dude, however thanks to @KiOgonI managed to get it converted to a passive bass using one of his kits

Purchased a wiring loom from John for my Washburn Bass after the preamp went to pot some time ago due to faulty pots. Loom arrived super quick and worked a treat to get my bass back up and running again! John was very helpful, providing various options that I could choose from and would highly recommend others use him should they need a new wiring loom. Thanks again, Cheers Vince

Excellent, very much appreciated, I’ll drop him a message!

Thanks for your response, can you advise what exactly you replaced them with, as I assume the pots need to go from existing 100k to 250k

Hi all, I have an old Washburn XB400 that plays great however can’t use as the volume pot is knackered (PCB mounted) and generally the electronics seem to be problematic. I have dismantled the pot and trying to put it back together have caused some damage to the PCB 😩 Finding an exact replacement pot also seems to be a pain, if found I can replace as I have the tools etc however worries the tracks on the PCB may be an issue now. Has anyone removed/replaced the preamp, keeping the pickups and rewired making it a passive bass? If so, do you have any recommendations? Cheers Vince