Bigwan

I've seen one somewhere... Think it was over on a custom build on TB.

Listen to some 3 leaf proton and groove regulator clips on YouTube. Between the 2 you'll find one that suits you I'm sure. The gr2 has a blend which can tame it down, allthough you can set it to be pretty tame anyway (i have the gr1 and it's lovely, but thinking of seeking out a gr2 just for the buffered bypass).

[quote name='NoirBass' timestamp='1373988683' post='2143915'] +1 I found the Squeezer really tedious, why didn't they add a USB port and some software? It'd be a must have pedal then. [/quote] Ha! No it wouldn't! People would still complain, same as they do with the markbass synth

[quote name='thisnameistaken' timestamp='1373819685' post='2141929'] Filling that out made me realise just how many effects I want that nobody makes. [/quote] Like what?

[quote name='TG Flatline' timestamp='1373893271' post='2142713'] Do it, that'd be a great build diary. Shep and I have talked about a similar project, currently on the back-burner, but very much along those same lines! [/quote] Nice! That I'd like to see. Easy to let the mind wander when contemplating this kind of project though. Now thinking of adding an escobedo uglyface as a switchable alternative to the mammoth and a pwm/wave shaper as a switchable alternative to the octave... Or in series... Where do you stop!!!

Cheers Tom. I'd considered that in passing (and have relays and a few cmos devices to hand at work) but if I was to go to those lengths I'd probably build another filter specifically for synth sounds and incorporate it along with the octave and fuzz in one 1550G box (your "like rome" dirt box as my inspiration Tom!). Individually switchable, an overall bypass and the filter envelope controlled from the clean signal at all times. One to think about...

A work in progress... [attachment=139097:IMAG0091.jpg] The unboxed circuit is a mammoth clone with the input impedance control of the mastotron. Originally I was going to put it in a 1590a (mooer sized enclosure) and use it as a preset fuzz, but think I might rehouse the chord octave pedal so I'll put it in along with it and bring a few of the controls out front. Don't know what to do with the groove regulator. Sounds brilliant, but there's no way to run the octave and fuzz in its loop and have access to them without the filter effect.

[quote name='NoirBass' timestamp=(1373558777' post='2139064'] I must build one of those Ezekiel's too. Sorry for not having posted recently, but have been busy making pedals :-) Since my last post I've managed to complete 2 RAT's, Colorsound Bass Fuzz, Big Muff (never got round to putting the clean blend in it), Dyna Comp, Keeley 4 Knob Comp, Zen Drive, Red Llama, Sparkle Drive, Tubescreamer, A couple of utility boxes and today I finished a Greedtone OD. I'm addicted! [/quote] ...wish I had your free time. 2 young kids and a hectic job are making it hard to get anything done. I've even resorted to kits to speed things up, but can't even get time to get those started (ggg tuned muff, rc booster and bb preamp based on pedalparts kits and some mods). Have been using any spare minute (including 3am baby feeds) thinking about custom circuit combinations....

60's P bass 60's J bass Fodera Emperor 5 Celinder Scarbee Update 4 Dingwall 5 Every one changed my outlook on the instrument.

[quote name='craigcapener' timestamp='1372662777' post='2128148'] How did the mastotron clone turn out? I had a look for DIY mastotron kits but i couldn't find anything. [/quote] The mastotron is just a wooly mammoth with the extra input impedance control to help it play nice with active basses and other pedals - I left out the 3 position switch too though. Build a wooly mammoth and add the control is what I did (built it on stripboard but have yet to put it in an enclosure - planning to put it in a box with the guts of a chord oc2 clone and a diy filter pedal). Pedalparts.co.uk do a mammoth clone kit. In answer to your original question it sounds filthy!

Tony bought an iPhone 4 from me through the forum. Quick payment and excellent comms. A star!

Just bought a mooer elec lady flanger from Ollie. Minty fresh pedal at a great price with fast delivery and great comma. What's not to like! Would deal again any time