paul j h

Bump

For sale Bartolini NTMB -918F preamp, full wiring loom and black rubber control knobs including push/pull on the volume and stacked bass treble, three way boost?switch, stereo switchcraft jack socket, battery pack and all mounted on a free scratch plate so you can see where everything goes. Looking for £80 this was recently taken out of my old bass by a local guitar tech (Guitar Angel) I will try and answer questions, but there is much more detail etc on the Bass Direct or Bartolini webstes. This sounded immense when in my bass, only taken out as reverting bass back to single P bass passive. If you require any further photo please PM me. Bartolini 9J-1 pick up also listed separately on Basschat. [attachment=181762:pick ups 004.JPG][attachment=181763:pick ups 005.JPG][attachment=181764:pick ups 006.JPG][attachment=181765:pick ups 007.JPG]

For sale Bartolini jazz pick in excellent condition, epoxy sealed from Bartolini' Classic series ideal upgrade for Fender etc. £40 Free postage [attachment=181759:pick ups 001.JPG][attachment=181760:pick ups 003.JPG]

bump

bump

bump

bump

bump

Bump, no love for this great bass

Now back available

bump

bump

For sale my Ashdown Klystron hand made in the UK, 575 watts in very good condition, new valve fitted. Home use only since I've had it. Interested in trade for Ampeg USA cabs.. The 575-Watt, 2 x10 + horn C210H-500 combo features a single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. A built-in dual band compressor acts separately on the high and low frequency components of the signal to provide precise control, while the on-board sub-harmonic generator turns the Classics into powerhouses of tone.Central to the performance of the combo is the use of new, custom developed Neodymium speakers which incorporate a number of advanced features including a cast aluminium chassis with thin brackets to avoid sound wave reflections, a magnet circuit with heat sink rims to ensure rapid heat dissipation and decompression holes in the cone. The result is a range of ultra-lightweight bass drivers that just keep getting louder as the level is increased, delivering a powerful, consistent bass tone at all volume levels and with no power loss over long performances [attachment=181883:012.JPG][attachment=181884:013.JPG][attachment=181886:016.JPG][attachment=181886:016.JPG] [attachment=181390:AshdownEngineeringBassAmpsClassicSeriesKlystronC210H500ComboIH10.jpg] Specifications Power Output (RMS) 575W Speaker Configuration 2 x10 + horn Frequency Response -3dB at 17Hz and 30kHz Speaker Outputs Minimum impedance 4 Ohms High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20V p-p Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p Line Input Impedance 22k Ohms, input level 0dBu nominal Line Output Impedance 10k Ohms, level 0dBu nominal DI Output 600 ohms balanced, level -20dBu nominal Tuner Output Impedance 1k Ohms, level 0dBu nominal EQ Bass +/-15dB @ 45Hz Middle +/-15dB @ 660Hz Treble +/-15dB @ 7kHz shelving Slider 1 +/-15dB @ 110Hz Slider 2 +/-15dB @ 340Hz Slider 3 +/-15dB @ 1.3kHz Slider 4 +/-15dB @ 2.6kHz Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave Effects Send Impedance 22k Ohms, level 0dBu nominal Effects Return Impedance 22k Ohms, input level 0dBu nominal H x W x D (mm) 645 x 610 x 340 Weight (kg) 37

Bump

Now with different trade/PX options

PM'd

bump

bump

Bump

Bump

Bump