Walker

Thanks for that - the doubler is parallel... (from the forum) "...our Current Doubler cable is in fact simply connecting two outputs in parallel." Does that make it any easier to make? I'm clueless about this stuff although trying to learn! I'll ask the question at tech support too.

[b]I 'moved' this from the technical forum, probably should have posted it here in the first place. Anyway...[/b] Hello, I have a Voodoo Pedal Power 2 and want to run 3 pedals - one with a 300mA draw, one with under a 100mA and another with a 500mA draw. I use a current doubler cable on ports 5 and 6 to get my 500mA. Could I use a 'tripler' cable (I would need to get one made up) for the 300mA pedal using three the 100mA ports? Thanks Chris

As above, no noise with my passsive or active. Sounds great in the band. I've even got a great patch for my electric upright sorted. Fantastic value.

Hello, I have a Voodoo Pedal Power 2 and want to run 3 pedals - one with a 300mA draw, one with under a 100mA and another with a 500mA draw. I use a current doubler cable on ports 5 and 6 to get my 500mA. Could I use a 'tripler' cable (I would need to get one made up) for the 300mA pedal using three the 100mA ports? Thanks Chris

Anyone else enjoying some of the amp sims or just me? The Eden sounds fabulous with my rig set flat. This thing is a bunch of fun. I bought it to leave in our practice room but may need to buy another! Been ABing my analogman chorus with the Zoom. Nowhere near, but in I live situ, it'll only be me that's noticing. Almost managed to get a usable and subtle OD and the envelope filters take some tweaking but again, very usable. Totally happy with this.

Thanks gents. That all makes perfect sense now. Totally get it!

Thanks for that Musky, yes, eachchannel has its own output, so does that mean if I have one channel set up for clean, and another set up as overdriven, I can only have 375w available for each? So how would I access the 750w option? By mixing them somehow?

Hi there, Very confused. I have two Vanderkley 112MNT cabs, Power: 600 Watts RMS, Impedance: 8 Ohms. I want to use a two channel GB STLMax 12.2. How does a 2 channel amp work? One cab into each channels output? Looking at this, what will I get? (from the GB manual)... The SHUTTLE®MAX12.2 dual power amp design offers a variety of available output power choices: One 8 ohm load (either Amp A or Amp B driven) 375 watts One 4 ohm load (either Amp A or Amp B driven) 600 watts Two 8 ohm loads (Amp A and Amp B driven) 750 watts One 4 ohm load (Amp A) and one 8 ohm load (Amp B ) 975 watts Two 4 ohm loads (Amp A and Amp B driven) 1200 watts Cheers Chris