Jump to content
Why become a member? ×

Rumble

Member
  • Posts

    581
  • Joined

  • Last visited

Everything posted by Rumble

  1. You could start your sixer adventure with far worse than this. The bass is tonally outstanding and is far easier to play than the fretboard width might make you think.
  2. Now £865 [color=#282828][font=helvetica, arial, sans-serif]I've had this bass for quite a while now, but as much as I love everything else about the bass, the ergonomics just aren't suiting me; the 6'er body is just a bit too big for my short arms. I had to get urid of my beloved Fbass for the same reason. That too was an incredible bass [/font][/color] [color=#282828][font=helvetica, arial, sans-serif]The neck is fantastic and the tone is incredible, especially with the piezo ...... WOW![/font][/color] [color=#282828][font=helvetica, arial, sans-serif]The TRB6p[/font][/color][color=#282828][font=helvetica, arial, sans-serif] is a pretty well known and 'iconic' bass so I won't bother waxing lyrical. It is was it is.[/font][/color] [b]Condition -[/b][color=#282828][font=helvetica, arial, sans-serif] I'd say pretty good for a 20+ year old bass, but it has signs of use:[/font][/color][list] [*]The usual little dinks on the end of the headstock and the back of the body + tarnishing of the hardware. [*]There is a 3-4mm nick in the lacquer along the top edge of the neck. [*]The left (as you look at it in the picture) truss rod has over the years slipped down by about 4-5mm, but is rock solid in that position. It still turns freely in both directions. The plastic guard to the truss rod access was absolutely battered so has been removed, but you don't really notice. The important thing is that you the truss rod still functions. [/list] [i][b]Truss Rod update[/b][/i][color=#282828][font=helvetica, arial, sans-serif]: after a couple of queries re the Truss Rod I have spoken to two luthiers who both reassured me that it's nothing to worry about. When the Truss Rod is loosened right off there's absolutely no movement in the rod and no rattling in the neck. The neck is true and stable, so both luthiers seemed unconcerned about it and discouraged me from doing anything about it.[/font][/color] [b]Electrics [/b][color=#282828][font=helvetica, arial, sans-serif]- 100%. Had a new neck PUP just after I purchased it a couple of years ago.[/font][/color] [b]Action [/b][color=#282828][font=helvetica, arial, sans-serif]- lovely and low (to me anyhow!)[/font][/color] [b]Price [/b][color=#282828][font=helvetica, arial, sans-serif]- Asking £865. Please contact me for a shipping quote. [/font][/color] [b]Trades -[/b][color=#282828][font=helvetica, arial, sans-serif] Higher end 5'er OR smaller bodied 6 string.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Please feel free to PM me with any questions etc..[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Pictures:[/font][/color] [url="http://basschat.co.uk/uploads/monthly_11_2012/post-207-0-49908400-1351885093.jpg"][/url] [url="http://basschat.co.uk/uploads/monthly_11_2012/post-207-0-05606700-1351885147.jpg"][/url][color=#282828][font=helvetica, arial, sans-serif] [/font][/color]
  3. For sale is my Tascam CD-BT1 in full working order. Comes with power supply but without the box. All the info about it can be found on the Internet or the various threads related to the same item. Please contact me with any questions. Sale fee includes postage Thanks
  4. Rumble

    TRB dilemma

    It's a pretty old bass so I imagine it'd just be plain old lacquer. Wasn't the poly stuff a more recent advance?
  5. Rumble

    TRB dilemma

    Hmmm! How easy would it be to strip all the lacquer off back to bare wood?
  6. I've recently acquired one of the original TRB6p's which is tonally what I've been searching for the last 20 years, but there's just one problem, the ergonomics just don't seem to be suiting me. In particular, where I rest my right arm, I just can't get comfortable. I've even considered stripping the lacquer to the bare wood so that I could try a subtle reshaping job along the top edge of the body - such is my love of this bass! Can anyone offer me some suggestions for how I can accommodate / compensate so that I can keep this stonking bass? Failing this, are there any other basses out there that offer the TRB tone with different ergonomics?
  7. Only because I've seen something else I really fancy, up for grabs is my Frudua GFJ 5 - really nice jazz bass with the following specs:[list] [*]Sunburst finish with maple fingerboard (pearl blocks) [*]Maple neck [*]34" scale [*]Bolt on neck (6 bolts and very stable) [*]DiMarzio Ultrajazz pickups [*]Dual coil neck pickup (switchable to single coil) [*]Active / Passive switch [/list] [b]Condition [/b]- Excellent all-round [b]Price [/b]- £550 with free P&P within the UK PM me if you have any questions Thanks for looking [attachment=124024:IMG_0341 (Medium).JPG] [attachment=124025:IMG_0342 (Medium).JPG] [attachment=124026:IMG_0343 (Medium).JPG] [attachment=124027:IMG_0345 (Medium).JPG] [attachment=124028:IMG_0347 (Medium).JPG]
  8. Thanks, Peter. I can't see that there's much for you to feel bad about. I must admit that had I been made aware of the truss rod anomaly by the seller I might have been put off, but now that I've experienced it and sought the opinion of the luthiers I'm no longer concerned. The tone is amazing and despite its size, the neck is so easy to play.
  9. For anyone concerned about the Truss Rod anomoly please see addition to original post for update. In short, it's nowt to worry about!
  10. I'll have you know that I'm fully hetro, but thanks anyway!! :-)
  11. This is my Spector Euro LX4 with maple thru neck construction, ?ash wings and a stunning zebrano top. Brass hardware, EMG pickups, tonepump preamp, Rosewood board with MOP Spector inlays, brass nut & Schaller tuners. [b]Condition [/b]- Outstanding [b]Price [/b]- NOW £695 inc P&P reduced from £725 [b]Deal option [/b]- take this and the Yamaha TRB6P I'm also selling for £1500 [b]Trades [/b]- would rather not take trades given that I'm also trying to sell the Yammy. Please get in touch if you have any questions. [attachment=122856:IMG_0310 (Medium).JPG] [attachment=122857:IMG_0308 (Medium).JPG] [attachment=122858:IMG_0311 (Medium).JPG] [attachment=122859:IMG_0309 (Medium).JPG]
  12. Thanks GK. I wish I'd worn this well at 30 yrs old!! I'm going to play this in anger tonight so a U turn could be on the cards if I can only figure out how to wear it to reduce the impact on my right arm.
  13. Thanks, Chris. I have to say the tone surpasses my expectations by a mile, but alas my short arms.....!
  14. Only just got this, but I know straight-away that the ergonomics just aren't going to suit me; the 6'er body is just a bit too big for my short arms. I had to get rid of my beloved Fbass for the same reason. That too was an incredible bass The neck is fantastic and the tone is incredible, especially with the piezo ...... WOW! The TRB6p is a pretty well known and 'iconic' bass so I won't bother waxing lyrical. It is was it is. [b]Condition -[/b] I'd say pretty good for a 20+ year old bass, but I've notice the following: [list] [*]The usual little dinks on the end of the headstock and the back of the body, and tarnishing of the hardware. [*]There is a 3-4mm nick in the lacquer along the top edge of the neck. [*]The left (as you look at it in the picture) truss rod has over the years slipped down by about 4-5mm, but is rock solid in that position. It still turns freely in both directions. The plastic guard to the truss rod access has taken a battering, but you don't really notice. The important thing is that you the truss rod still functions. [/list] [i][b]Truss Rod update[/b][/i]: after a couple of queries re the Truss Rod I have spoken to two luthiers who both reassured me that it's nothing to worry about. When the Truss Rod is loosened right off there's absolutely no movement in the rod and no rattling in the neck. The neck is true and stable, so both luthiers seemed unconcerned about it and discouraged me from doing anything about it. [b]Electrics [/b]- 100% [b]Action [/b]- lovely and low (to me anyhow!) [b]Price [/b]- I'd just like to recoup my outlay so I'm asking £895 including fully insured shipping in the UK. Please contact me for a shipping quote outside the UK. [b]Deal Option [/b]- take this [u]and [/u]the Spector Euro LX4 (Zebrano top) for £1500 [b]Trades -[/b] Jazz 5 or something very similar please, OR smaller bodied 6 string. Please feel free to PM me with any questions etc.. Pictures: [attachment=122860:IMG_4712 (Medium).JPG] [attachment=122612:IMG_4714 (Medium).JPG] [attachment=122861:IMG_4717 (Medium).JPG] [attachment=122614:IMG_4715 (Medium).JPG]
  15. Is that 4 identically constructed basses with different PUP / pre combinations? Absolutely fantastic playing of an incredible instrument!
  16. Are you selling two of these basses? I can see two ads, one selling for €800 and this one at €700??
  17. Lovely bass, but I think you need to put a sale / trade value in the ad.
×
×
  • Create New...