Jonny Walker

Hey people, I'm selling my wireless receiver and transmitter. The receiver was rack mounted and the transmitter is also in good condition and ready to go. It also has a neoprene case to hold the transmitter to a strap but this does have some damage on the velcro. Postage to mainland UK included, shipping elsewhere at buyers cost!

Hi people, I'm selling my Metro20 with hard case. It has some cosmetic damage but is ready for a new life on the road. Postage to mainland UK included, shipping elsewhere at buyers cost!

Hey People, I'm moving my Jamman on. It is in good working order and comes with the power brick. Postage to mainland UK included, shipping elsewhere at buyers cost!

Hey all, Time to move my A/O onto a new home. One of the best distortion pedals out there. Give it a try at this bargain price! Delivery Included!!

.175

Hey all, Time has come to sell my bass whammy, comes with the correct power cable. If you're looking at this I'm sure you know what great sounds it can create. Grab a bargain. Postage included

Yea, all still available

Hi all, The time has come to sell my Cali 76. this is the limited edition TX-P model which features a premium quality FET compressor with added parallel compression and switchable boost. It is in full working order. I have owned this pedal from new and it has lived in an isolated rack case its entire life. There is one scratch on the face plate, and some blemishes of the finish on the right side and I have removed the feet in place of a wide strip of velcro for security. Unfortunately, this item does not come with the box. A truly rare pedal and something I never thought I would sell but it deserves a new home. DELIVERY INCLUDED! Many thanks

Grab a bargain 😁

Pm'd

Nothing unfortunately, I've not played in years and this level of gear needs a new home

Darkglass B7K - £130 Darkglass Alpha.Omega - £160 Prices are delivered!

Time to move my amp on to a new future. 8U Rack case Effects shelf Samson Powerbrite Pro power conditioner Unpowered Kemper Matrix GT800FX FCB foot controller for the Kemper DELIVERY INCLUDED!

The time has come to move my BT2. It has a few small chips (in photos) but is generally in very good condition. It comes with a travel case. Delivery can be organised at the buyers' cost

£260 Selling my Ltd F-415 FM Great bass for the money, It does have some small imperfections but this was cherished back when I was touring. The nut has also been shaved slightly to accept a thicker top string. Hasn't been played for a few years and needs a new home. Can be delivered the next day by my local courier for £60 Comes with Mansons case and strap also. Grab a metal bass bargain!

Nope, £1300 plus shipping. The nut has been shaved to accept a thicker top string and it was my touring bass for a few years so it's got some road rash. Just putting up an honest quick sale price but had no takers yet

Selling my Ltd F-415FM Has some nicks and finish blemishes shown in photos. Comes with a case and strap Price £300 Delivered next day for £60 with my local courier

Selling my Dingwall 5 which has the Darkglass tone capsule active preamp installed. UV side markers It's in fair condition with some light dings on the back and some corrosion on the bridge and pre-amp knobs. Comes with a touring case and strap. Delivery can be arranged at buyer's cost

Used but in great condition and was serviced last year with no faults. I've used this power amp in my guitar rig for 3 years and it has never let me down. Huge power, Matrix build quality and it comes with an SKB rack case. The XT2000 outputs 1000 watts of great sounding class AB sound per channel from its 7.5 kg chassis. Often used for high powered compression driver arrays on large systems, kick bins, large top boxes requiring up to 1000 watts at 4 ohm and the bottom end of sub / satellite systems where the subs require 1000 watts at 4ohms, each. Can also be used with; high powered compression driver arrays on large systems kick bins large top boxes requiring up to 1000 watts at 4 ohm pairs of subs requiring 1000 watts each at 4 ohm. The switched mode power supply ensures that plenty of power is available for the output stage to faithfully reproduce every transient in your original source material. The dual speed temperature controlled 80mm long-life fan draws air through the front, exhausting heat from the rear of the rack. The amplifier has fully balanced Neutrik XLR inputs, Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused 20A Powercon inlet. If you require a little more power in the 2u format please have a look at the XT2000's larger brother, the XT3000MF, likewise if the XT2000 is a little too powerful for your needs then please have a look at the XT1000. Number of channels:2 Height (RU):2U Watts (rms) per channel, 8R:600 Watts (rms) per channel, 4R:1000 Watts (rms) Bridge Mode, 8R:2000 Average Supply Current, Full load:10A Mains Connector:20A POWERCON Frequency Response (±3dB ref 1kHz):8Hz – 24kHz Signal to Noise Ratio (ref full power, 1kHz):99dB THD (20Hz - 20kHz, full power):0.07% Slew Rate:65V/μs Damping Factor (ref. 8R, 100Hz):>500 Cooling (Temperature Controlled Dual Speed Fan):1x 80mm Fan Cooling Direction:Front to Back Dimensions, mm:482 wide x 88 high x 210 deep Weight:7.5kg Gain: 37.2dB Sensitivity: .950V RMS for full output.

Sold

SOLD PENDING

[quote name='Dan Dare' timestamp='1503781621' post='3360913'] Blimey. Something for the person whose Ampeg fridge just isn't man enough. Paul made me a 2x12 a while back. He does good work. [/quote] It's definitely not for the faint hearted yea, there's doesn't seem to be much hype around zillas but they're top quality

[quote name='VicMacKey' timestamp='1503818625' post='3360984'] Hi Johnny, Thomas from In The Guise Of Men here, hope you re doing well! I had the opportunity to play on this cab paired with my GK 2001 RB II when touring a little bit with Johnny and I can tell you this cab rocks !!! GLWTS buddy ! [/quote] Oh hey man! Thanks for the recommendation

[quote name='plankspanker' timestamp='1503488164' post='3358605'] Cor - that's humongous! Assuming they are 8 ohm drivers I'm betting it's probably 5.3 ohm altogether. GLWTS. [/quote] Yea she's a beast. I'm not sure on the exact ohm rating but Paul got it as close as he could and it's run with an 8ohm input for a while with zero issues