MrT-Bass

Jenzuwin, I've now had 3 Shukers built from scratch and each has been of superb sound, playability and build quality. IMO Jon is one of the best luthiers around and deserves to be recognised as such. I'd say get a spec together and speak to Jon about what you want. He is highly knowledgeable and will be able to guide you with your choices. Depending on the complexity, they can take a while to be completed but they are worth the wait. Post your spec if you go for a custom bass. (I recently had a custom set neck Jazz built by Jon. There's a build diary on this part of the forum if you wanted to check it out.) Cheers, T

Shizznit, they're both Buck-eye Burl...I totally agree. If I hadn't needed to sell the Elite, it would still be with me! The Jazz makes up for the loss in more ways than one Your Uberhorn looks great...I remember watching it unfold on the build diary. The reverse headstock looks interesting. Did you decide to do it for the string tension?

Hey guys, Here are a few of my Shukers, a Jazz (2013) and an SC (2011) [attachment=156052:Shuker Jazz - Front A.jpg] [attachment=156053:Shuker Jazz - Back.jpg] More details on this one here - [url="http://tiernangodel.co.uk/shuker-jazz-bass/"]http://tiernangodel....uker-jazz-bass/[/url] and a the build diary here - [url="http://basschat.co.uk/topic/220403-shuker-set-neck-jazz-bass-build/"]http://basschat.co.u...azz-bass-build/[/url] [attachment=156054:Shuker number 2.JPG] ...And here's one I used to own but sold [attachment=156055:Shuker 1.1.jpg]

Sorry for the delay in updating the thread. The bass finally arrived in mid December and it has taken me this long to put it down and get to a keyboard. Here are a few pictures and there are more pictures with a full review of the bass on my blog (http://tiernangodel.co.uk/shuker-jazz-bass/) It is another stunning example of Mr Shukers workmanship and it plays fantastically!! [attachment=154826:Shuker Jazz - Front.jpg] [attachment=154827:Shuker Jazz - Back detail.jpg]

Very nice mate...I'll bet you can't put it down!! I hope it's everything you wanted

So...I just had a chat with Jon and it looks like I should receive the bass by Thursday this week Here's a cheeky picture he sent as a taster and to check some final details. [attachment=150166:Control layout 2.jpg] If I said I am excited it's probably an understatement in the extreme!!

Great job Dude!!! I love the whole bass - from conception to the finished bass!! That Lion scratch-plate is particularly special

I've been watching the progress on this and can't wait to see it all come together!! The rotary control is really interesting...Are you having one control switching from Off-parallel-Series-single coil that effects both pickups? I had wanted to put a switch in my build like this but went with the 'both pickups Parallel-both pickups Single Coil' switch in the end. Maybe I could get it rewired at some point... Sounds like a really versatile bass you've got coming there

Thanks guys...Just added a new close-up picture showing back of the neck... I'd not thought of the similarity to the SR5...I put together my favorite aspects of each Shuker I owned and then added a few extra things...this was the result. Fingers crossed it turns out as well as I hope!!

Having had two previous basses built by Mr Shuker, I wanted to use the experience and knowledge I had gained from the previous builds to spec up my ultimate bass. The previous basses have been a Shuker series II which I have now sold (Here's a link to the build diary - [url="http://basschat.co.uk/topic/31473-yes-its-another-shuker/page__hl__shuker"]http://basschat.co.u...age__hl__shuker[/url]) and my current number 1 bass, a set-neck Single-Cut bass (no build diary for this one unfortunately!). My reasons for ordering this bass are varied but primarily I wanted to have a bass of the same caliber as my SC bass in the form of a jazz bass. The spec on the new bass is here - 5 string custom jazz 34" scale 24 frets 17.5mm spacing at bridge nut width 45mm neck depth at 1st fret 20.5mm 12th 22.5mm 3 piece wenge - deep set neck macassar ebony board two way truss rod carbon fibre reinforcement MOP side dots small frets brass nut white headstock finish black shuker sig headstock 1, 4+1 with string trees Hipshot Ultra light tuners neck lacquer so the grain of the wood can still be felt j bass custom shape, deeper cutaway, extended horn ash body, multi chambered upper bout polyester bisect Olympic white colour nitro finish satin topcoat 1 x Tort [b]&[/b] 1 x Black s/plate (to be fitted first) chrome hardware rear rout control cavity hipshot A style bridge removable ramp – Black Ebony Kent Armstrong pickups - Dualcoils (with a radius) – Parallel / Single coil switch (With the wiring done so as to allow a switch to Series / Single coil if desired) 60' spacing (bridge pickup 1/2" nearer neck) John East pre, U retro BLI001 – Jon East battery life indicator side jack The bass was ordered mid September last year and I'm expecting it to be finished any day now so I thought I'd share the spec and various pictures with the Basschat community. Neck pictures - [attachment=146696:tg1.jpg] [attachment=146697:tg3.jpg] Body Picture - [attachment=146698:tiernanjazzbody1.jpg] Neck set into body - [attachment=146699:tiernan3.jpg] [attachment=146700:tiernan2.jpg] [attachment=146705:tiernan1.jpg] Pickups - [attachment=146702:Kent Armstrong pickups sample pic - side.jpg] Hardware - [attachment=146703:5 string a style bass bridge - silver.jpg] [attachment=146704:Hipshot_Ultralite_Bass_Tuner_with_Fender-style_Knob_sm.jpg] That's it for the moment...I haven't received any further pictures from Jon and I'm quite looking forward to the surprise when I open the case. With any luck I'll get an email from him in the next few days and I can add some pictures of the finished bass. I'll update with any further developments..!

OOoo...It's getting closer!! I'm looking forward to seeing them...He's about 3 hours off finishing a jazz for me and I really can't wait.

This is looking great...My set neck SC Shuker has become my number 1 bass for almost every gig. I'm pretty sure you'll love it. It'll be interesting to see this one 'come to life'