bagsieblue

Squier Bass Neck from a Pete Wentz Bass £29 shipped mainland uk. Broken / think of this as a project. There is an issue with the truss rod - it doesn't appear to adjust at all / correctly. It feels as though the nut is about to 'grab' then it slips again.

A case or gig bag, whichever would be the preference of the buyer. Then into a sturdy outer box.

Bass is still currently available. Shipping to Mainland UK is included. Bass weight 4.52kg on digital kitchen scales.

SBP2 now sold. SBP1 still available.

Don't think so, only finished building it a couple of weeks ago.

Epifani Tour Rig - Tour 555 Combo (Piccolo Amp & 210 Cab) and Tour 210 Cabinet. £1200 Collected. Up for sale is my Epifani Rig which is made up of: The Tour 555 Combo and the Tour 210 Cabinet. This really is a great modular rig that would cover almost any venue. Selling with a heavy heart - I became unemployed at the beginning of March, the job market is quiet at the moment so I need to be sensible and raise funds from the arsenal. Details are: Combo - Tour 555 Configuration Single Channel Preamp Class-D Power Amp Switch-Mode Power Supply 2 x 10-inch 225-watt Epifani Neodymium drivers by Eminence 1 x 1-inch compression tweeter with adjustable control Impedance 8 Ohms Power Rating Amp: 550 Watts RMS @ 4 Ohms Cabinet: 450 Watts RMS Extension Speaker-Ready Response Amp: 20 Hz - 25 kHz Cabinet: 42Hz - 16kHz Sensitivity: 100dB (1W@1m) Voltage 120 Volts or 240 Volts, 50 or 60 Hz 550 Watts consumption at full power Connections 2x Speakon + 1/4-inch output connectors Hardware Lite Ply with dado joint construction with vinyl covering. Steel recessed handles and an 18-gauge steel grill Dimensions 22.7 inches (h) x 19 (w) inches x 16.7 inches (d) Weight 50 pounds ========================================================================= Tour 210 Cabinet Configuration 2 x 10-inch 225-watt Epifani Neodymium drivers by Eminence 1 x 1-inch compression tweeter with adjustable control Impedance 8 Ohms Power Rating 450 Watts RMS Response: 42Hz - 16kHz Sensitivity: 100dB (1W@1m) Connections 2x Speakon + 1/4-inch output connectors Hardware Lite Ply with dado joint construction with vinyl covering. Steel recessed handles and an 18-gauge steel grill Dimensions 22.7 inches (h) x 19 (w) inches x 16.7 inches (d) Weight 45 pounds =============================================================== Condition is very good, just a few minor scuffs and scrapes. They also have homemade covers to help protect the cabinets. £1200 for the combo and extension cabinet. £799 for the combo and £449 for the cabinet - ideally I'd want to sell as a pair as it makes a great rig. Social distancing collection preferred but can look into shipping if absolutely necessary. I'm based in Chorley Lancashire.

£199 shipped Mainland UK or can be collected via social distancing from Chorley Lancs.

Thanks.....Yes, I think so.

Now £325 shipped.

Spector Euro 5 String - Natural £1199 Now £999 Collected, socially distanced from me in Lancashire, shipping in the UK possible for £30. No Trades. Natural finish - 35" scale. The serial number dates to 2005. The pre amp is the standard tonepump pre amp from this time. Please see the photographs, it's a colour which is a little tricky to capture the actual colour 100% accurately. I'd say in the flesh it is a little darker than the photos which are at the paler end of the scale, and similarly a little paler than those photos which appear to have the yellow hue. The actual colour is somewhere in the middle of those. There are a number of minor marks on the bass as shown in the photographs, these are from thumb placement above the pickup and one small dent on the bass. Overall its in very good condition for a 15 year old bass. These are just the normal wear to be expected from a 15 year old instrument. £1199 shipped Mainland UK, or collect from Chorley Lancashire.

£550 shipped Mainland UK

It is yes.

The full bass here (including 2 x 9v batteries of course!!) is 5.4kg

I measure it at 43/44mm.

Happy to listen to / be tempted by a PM offer, though that said my preference would be to hold out for selling the full bass as it as in its full build for a while, it does work so well as a whole.

Yes, now amended.

Now Sold Pending Here is my - MM USA SUB (Stingray) 4 String complete with John East 2 Band Pre Amp - £575 Shipped Mainland UK. John East Pre Amp: https://www.east-uk.com/index.php/bass/mmsr/mmsr-3-knob-2-band.html As you'll most likely know this "is" a Stingray. These USA basses were made alongside Stingrays etc in the USA Ernie Ball factory in San Louis Obispo. Reputedly Ernie Ball stopped making these as they were too good for the money / EB were loosing money on each on they sold and cannibalising the sales of the top of the range Stingrays. The bass plays nicely, its well set up and has all the usual Stingray tones and punch, currently wearing flats but can switch to rounds if you'd prefer. USA Musicman quality , classic Stingray sounds and in very good playing condition. A few areas of wear on the body and some wear to the black finish on the edges of the headstock as shown in the photographs. Also, some scraping off of the paint on the neck close to where it meets the scratchplate.

As the world is currently on pause - rightly so - and I have no income, I'll be listing up lots of items in the next few days. Here is my Squier Precision - Made In Korea - Early 90s - £SOLD Dates from early 90's - This bass has had a relatively tough life as can be seen from the dings, dents and tarnishing. Things to note: Dings and dents to the body, particularly the underside of the body. The D string machine head ferrule is missing - please see photo. I bought this as a project bass with an iffy truss rod - this was sorted by my local luthier (nut stripped out and lubed). There was a small crack on the truss rod access near the nut, this can be seen in the photo and has now been glued and is stable. Truss rod now adjust fine and I have had various strings with various tensions all set up and adjusted for playability fine for the suitable amount of relief via the truss rod. All things considered, a c30 year old bass, a few cosmetic areas but plays fine. A decent bass for not a lot of cash - £160 shipped Mainland UK.

Here is my Bitsa Jazz bass - £349 shipped Mainland UK. Will now part this out. £150 for the raw body only no hardwear - price is shipped mainland UK. £150 for the neck only - price is shipped mainland UK. The body is a custom made jazz bass body, 2 piece ash, africa wedge top. A great playing and sounding bass. Unknown Jazz pickups, with a passive Volume / Voume / Tone Wiring (Note not the EMG's as shown in the photos - I will update new photos ASAP). As this is a Bitsa project build - things to note: Body - note the visible join on the where top, can be seen between the A & D strings, also a small scar on the upper face of the body, above the pickups. Neck - Maple Generic Neck, lovely flame on the back. A couple of B stock elements on this neck: 1 - the tuner holes are not drilled quite flush so the tuners sit slightly proud, see photo. 2 - The think varnish on the neck has left some witness marks of varnish on the neck itself close to where it meets the neck pocket, again please see photo. I may be open to parting out, removing the pickups and loom if you wanted to use you own simpler/more cost effective set up on that etc.

Trace Elliot AH500-7 Amplifier - BFC-4 footswitch and lead. £300 shipped Mainland UK. This is a head from a 715x combo, removed and built into a custom (homemade) casing. The casing is vinyl wrapped, cosmetically there are a few creases in the vinyl here and there but still does a great job of housing the head. 500W RMS @ 4 ohms with a 7 band EQ and compressor. * 7-band classic Graphic Equalizer. * Compressor with self-adjusting program dependant Attack/Release times. *Effects loop. *Output Mute switch, active on all outputs except Tuner Out. *Electronically balanced XLR DI outputs for Pre and Post Preamp. *MOSFET technology 500 Watts (4 Ohms) output stage. *Footswitch allowing control of Preshape, Graphic EQ, Compressor and Output Mute.

MONO M80 Dual Bass Case In very good condition, see photos, just a couple of nicks. The one closet the front is the front pocket not the front bass compartment. £169 collected via social distancing from Chorley Lancs. ABOUT THIS PRODUCT A second bass is a must-have on stage or in the studio. But in transit, carrying two bass guitars has always been a necessary evil. We set out to design an elegant solution to this problem. Our driving criteria was to offer each guitar the same protection as our single M80 hybrid case. After a year of prototyping, the Z-form™ design was perfected (patents pending). The end result is an incredibly light weight, extremely rugged Classic Dual Bass Guitar Case. A first of its kind. Go play. 360° PROTECTION DROP-PROOF The patented Headlock™ design provides a level of protection worthy of the finest instruments. Your guitars quickly strap in and remain stabilized during transport. The headstocks of both guitars are suspended inside the case, saving them from both side and rear impacts. STRAP PIN PROTECTION Hi-density foam bumpers divert vertical impacts out and around the case, away from the strap pin. Integral ABS panels deliver hardcase protection at a fraction of the weight. The reinforced outer shell of the case absorbs and deflects hard impact away from the vulnerable areas of the guitar. SMART STORAGE ONE OR TWO GUITARS This patented “zig zag” design creates a completely separate case for each guitar. That means both headstocks are protected with our Headlock™ suspension system and strap pin bumpers. It also means the M80 Dual can be used with 1 or 2 guitars - something you’ll appreciate on the road. Additionally, the Z-form design allows for immediate access to either instrument. TICK-READY Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready - please contact support if you have questions about the Tick-compatibility of your MONO case. PLUG AND PLAY Everything in its place. Specialized storage compartments put your gear right where you need it. The hidden upper pocket keeps your wallet, keys, and cell concealed. Pen slots double as tool storage. Business card storage and a durable key clip are also included. BUILT TO LAST WEAR IT OUT We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin™ shell keeps you on the move, rain or shine. 100% animal free. RIVETED HANDLE & HYPALON SOLE Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip. All M80 cases feature a hard-wearing sole and piping made of Hypalon - the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

Precision Pickup - £18 posted Mainland Uk. Unsure of the origin after all this time, just gave it a whirl in a project bass and it sounds like a P pickup should! Note the lugs are a little rounder on these so can be a tight fit with some scrathplates, easily resolved with a touch of filing if required.

Music Man Stingray - Original 2 Band Pre Amp. Pretty rare to find these. £129 shipped Mainland UK?