Jump to content
Why become a member? ×

Kevsy71

⭐Supporting Member⭐
  • Posts

    879
  • Joined

  • Last visited

Everything posted by Kevsy71

  1. Richard kindly drove over a Vintage Tony Butler Sig P in excellent condition - very pleased with it, and a pleasure to meet and chat! Top recommendation, many thanks Richard
  2. I bet you could still rest one of these on them...
  3. I'd assume in that setup there is (1) frequency overlap between the front and back speakers and hence (2) interference as the soundwaves from the rear pair meet the front pair, which is difficult to control. So likely to be a sub-optimal mix for the audience. It also seems like pub overkill: we've managed 30+ pub gigs using a budget gear4music speaker pair (12s + horn) on stands and a humble Behringer mixer . Vocals, rhythym guitar, keyboard through PA, drums unmicced (although sometimes we run the kick through an old 1x15 bass combo ), sax unmicced with a reflection monitor on a micstand, harmonica through a combo, bass through 2x15 (but very rarely cranked). Floor monitors for vocals, keyboard, guitar only. And it's an easy tear-down for the rainy car park afterwards.
  4. Fantastic basses, I had a 4HH too - but I'm guessing yours is not 5kg heavier GLWTS!
  5. Please can you confirm the fingerboard radius? I can't remember if these are 7.25" or 9.5" . Cheers!
  6. Dakota is a lovely shade, darker red than fiesta which has a hint of pink. What's the fingerboard radius bruce?
  7. Withdrawn, probably because @Marc S is right on all counts ^^
  8. DIsclaimer: not tried one, but the Bass Centre Ps get good reviews, especially the Bruce Thomas signature model.
  9. For sale only: Fender Roadworn 50s Precision bass. £750 including UK courier No trades thank you (some more hi-res pics here: https://www.flickr.com/photos/133089969@N07/albums/72157666524093767/with/27118298298/ I bought this recently from fellow Basschatter thebrig, original sales thread here: https://www.basschat.co.uk/topic/320859-sold-fender-road-worn-50s-precision-bass-sunburst-20156/ It has not been gigged or even at band practice since I received it. Includes the original Fender gigbag and case candy (bag candy?) Comes with LaBella FS (standard gauge) flats, not the FL as shown in the pic. Price includes UK courier. Thanks for looking!
  10. For a home cinema, music listening room or studio; with a static, seated audience and careful acoustic treatment; I would absolutely go to town applying the scientifically-correct sound reinforcement solution. Because in that environment, the variables are minimised, and the results can be more fully appreciated. But at the Dog and Duck, with a packed car park in the rain, an L-shaped-low-ceiling- room-with-a-bar-and-ante-rooms-and-windows-and-glass-conservatory, packed* with standing, moving, 'refreshed' and loud-talking punters? Then the goalposts move. If I can hear clear vocals and distinguish the instruments from the busy parts of the room then I'm happy: and if that can be achieved with a more portable set up with less trip hazards, less power strips and less footprint then that setup wins. Sadly we're not generating anything near-enough the gig income to switch, so it's teetering PA tops for the foreseeable. Mind those stand legs! * anything more than three, including dogs
  11. Sorted , see here: https://www.talkbass.com/threads/ampeg-v4-b-2016-no-signal-from-preamp-out-di.1332575/#post-21063304
  12. Hi all, My Ampeg V4-B works great into a cab, and I thought I'd try a DI recording. Chain: P bass -> 0dB input on V4-B -> DI out -> Focusrite Scarlett 2i2 'Line' input. My speaker cab was connected. Nothing registered at the Scarlett (tested with other preamps, and working fine). I heard the bass as normal through the speaker. Tried taking 'Slave out' and 'Preamp Out' to the Scarlett, again nothing. But: when I feed another Preamp into 'Power Amp In', then the DI works. Any ideas please? It's as if the V4B preamp->power amp chain is working fine for speaker output, but not for the preamp->DI/Preamp out/Slave out circuits. Cheers! Kev
  13. Is the earth wire soldered to the underside of the bridge, or is the wire just splayed out so that threads contact the bridge? I had a similar issue on a P which had the latter, and so I scraped back the bridge plate to reveal some copper, to which I could solder the earth wire: hum greatly reduced.
  14. After an epic noodle I realised why I loved this so much - can't part with it, so withdrawn. Thanks for all the interest!
  15. Superb Lewis!! I have gold on my faded surf green relic, love it Is that the CIJ maple neck...?
  16. Surely the best response would have been "Howdy, partner!"
  17. If basses are going to start wearing jackets, then mine needs to be a Puffer for tonight's gig!
  18. Just bought Brian's Roadworn P: exactly as described, carefully packaged, quickly despatached and communications throughout - perfect! Cheers Brian, much appreciated
  19. I awoke from surgery once in a darkened room, to a deep voice saying "it didn't work". They actually meant the surgery hadn't gone ahead due to a technical fault, but my first thought was "I'm dead, and this is heaven". My second was , "Now, where do they keep the original '57 Ps...?"
  20. Try this: practice it 3 times slowly, then 1 time fast. And repeat...
  21. @ZilchWoolham, the first Continental Europe link in Germany is now dead/shut down; but to make up for it there's also these across La Manche: http://leguitarium.fr/categorie-produit/guitares-basses/par-type-basses/guitares-basses-vintages/ http://vintageguitars.fr/en/product-category/guitars/bass/ http://www.bassclubparis.com/index.php/occasions/fender
×
×
  • Create New...