Jump to content
Why become a member? ×

molan

Member
  • Posts

    6,616
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by molan

  1. I really fancy one of these to stack vertically on the one I already have Did you get them with the MB Logo sitting the right way up when stacked vertically or did you have to remove it? I've never even thought about moving the logo but it does look a bit more professional the right way up!
  2. A few quick questions : Do you string it B to G or E to C? What's the bridge string spacing? Have you got an approx idea of how much it weighs?
  3. Standard fit on Wood & Tronics as well. They used to use Fodera, and did actually prefer them, but the Dunlops come in a lot cheaper and still sound really good Could just be me but I felt they 'died' quite quickly though
  4. [quote name='dwh87' timestamp='1352685001' post='1866203'] These are cheaper than some MIM models by a couple hundred pounds from some places. Fender have really made them very cost effective. That does mean luxury things like a hardcase are missing though. [/quote] A Mexican Fender P is about £425 - surely there's no way a UK dealer can sell an American P for a couple of hundred less than that? The FSR tag has been used for a few different basses and not all are for a single retail chain. I think the early ones were for Guitar Center in the States and some of those were MIM not MIA. Fender marketing then realised they could use the label for other limited runs and these have been around 150-200 units I think. I have seen some as low as £500 (the Antigua P) and I seem to remember one of them up over £1,000 (stained ash P). I know the more expensive ones came with hard cases. Sounds like typical Fender really, grab a label and use it for marketing purposes across a range of guitars and confuse everyone
  5. Saw a gig at the Festival Hall tonight with a bassist switching between DB and a Fender P (looked like a Pino) all evening. Both basses went through one rig with what seemed to be a simple A/B pedal. The rig was an SVT Classic into an 8x10 (laying on its side). Big suspended wooden stage and not a hint of feedback all evening
  6. [quote name='pendingrequests' timestamp='1352667377' post='1865945'] yep, its just the bare bones, which gives it a really good price for an american made fender. [/quote] That sounds wrong to me - sure the dealer isn't just tryin to flog you a new case (whilst also selling the original Fender case to someone else)?
  7. This is nice - but very expensive (and it's German!) http://www.bassgear.co.uk/products-page/accessories/straps/richter-beavers-tail-jaro-tan-1055/
  8. Take a stack of pics, front and back of body, neck and headstock. Remove the neck and get pics of the cavity pocket and any stamps on either neck or body. Same with the control cavity and check the pots for serial numbers. If they lift out easily then remove the pickups and get pics of the underside of these as well. Basically the more info you can get them the more likely it is that you'll be able to start dating it. Depends if you just want an approx value for personal reasons or whether you're intending to sell it. If it's the latter then you should, ideally really strip it down and get a better feel for authenticity and dating. I've seen a swathe of old Fenders in the last year and it's amazing what some, supposedly reputable, dealers will sell as an authentic vintage guitar Saw one recently that had been through one of the highest profile dealers around that had been sold as 100% original with no refinish. Took the neck off and the pocket and bridge had been shaved to take a neck that was either not original or had a seriously thick coat of gloss lacquer as part of a, very obvious, neck refin
  9. Is it all working Ok with no scratchy pots etc.? Also, ever had any issues with it cutting out when hot?
  10. I saw this on No Treble and genuinely thought it was an April Fool! They sometimes republish stuff or it gets moved back up the site because of an update etc.
  11. Have you asked about it on TalkBass Rick? There's a few real Fender experts over there. Mind you, feedback for Rudy's is generally terrible. Poor customer service, way over-priced, lots of basses badly set up etc. The Americans seem to rate Rudy's & neighbour Sam Ash a bit like we do Denmark Street
  12. I've spent quite a long time now with my Ritter which is a 33.3" scale. It doesn't immediately feel hugely different to my 34" Fenders or Foderas but after a while playing I find I'm definitely more comfortable on the Ritter. I use to play mosty 35" 5'ers and got on with them fine but fairly convinced that this 33.3" is the best for me. I notice far more of a difference in stretching and hand cramping on a small bodied bass with a headstock strap button that falls closer to the body than a 'regular' bass.
  13. I kinda like it - would definitely gig with it if I could afford it Price seems like a bargain for Rudy's - they have a $54K '69 Strat up for sale at the moment. . .
  14. Some of this is very obvious but it's worth a read for people new to gigging - or those who don't gig that often & could do with a 'refresher' Main link is here: http://www.musicradar.com/tuition/guitars/playing-a-gig-kit-list-and-essential-tips-566304 Copied & Pasted below: [b]Whether you're a guitarist who's taking their first step into performing on stage or a grizzled veteran of the live circuit, we're here to help you out.[/b] We'll start by providing you with a checklist of everything you should take with you; then we'll give you the essential dos and don'ts for when you're soundchecking and playing the gig. [b] Stage survival kit[/b] Talent aside, preparation is the real key to success – and your gear is a big part of that [b]Guitar tools[/b] Pack string cutters, pliers for tightening, and Allen keys to tweak your action and vibrato system. [b]Gaffer tape[/b] Fix your mic stand, setlist, cable, van exhaust, leaky shoes. [b]Spare guitar and strap[/b] Tune it up before you go on. Your fans will escape to the bar if you hold things up changing a broken string mid-song. [b]Spare strings[/b] Strings aren't immune to breaking in soundcheck – spares are essential. [b]Torch[/b] It gets dark onstage: get an app for your smartphone and you won't have to worry about forgetting your torch. [b]Tuner pedal[/b] Never forget this. Get the best you can afford: there is no excuse for starting out of tune. [b]Pen and paper[/b] Have these on hand to jot down your setlist. [b]Amp backup[/b] If you can't take a spare amp, try a modeller with cab simulator that can be DI'd straight into the PA. It's not ideal but it's an option if another band on the bill can't help you out. [b]Batteries[/b] You'll need some spares if your power supply goes down. [b]First aid[/b] You don't want to bleed on your fans or let a headache ruin your big night – pack some plasters and painkillers. And the singer's secret weapon: throat pastilles. [b]Blu-Tack[/b] If your pick tends to fly out of your hand mid-song, stick spares to your mic stand or guitar so replacements are always at hand. [b]Electronic cleaning spray[/b] A quick fix for crackling connections. Make sure it's in your gigbag. [b]Spare pedal[/b] Get a budget spare for your essential pedal. For the super- prepared, a multi-effects unit could save you from serious pedalboard problems. [b]Earplugs[/b] It might get loud – these can increase the clarity of onstage levels. [b]Cables[/b] Pack instrument, patch, speaker, XLR and daisy chain cables. Don't buy the cheapest: quality lasts and you always need more cables than you think. [b]Picks[/b] Minimise the chances of losing one from sweaty mitts by packing picks with grippy surfaces. [b]Mains adapter[/b] Never assume the venue has enough power points or extensions. It's worth investing in your own multi-socket extension adaptor that's RCD- equipped, with surge and overload protection. [b] The Soundcheck - Take the time to get to your band's sound right and then you can focus on the fun part[/b] [b] [b]Do…[/b][/b] [b]Learn the names of the sound engineers: [/b]treat them with respect and thank them at the end of the night, even if they treat you like an amoeba. [b]Set your amplifiers to sensible volume levels onstage.[/b] Moderate levels allow the engineer to have more control over the overall front-of-house balance meaning that monitors don't need to be pushed to levels where they begin to feed back in order for singers to hear themselves. [b]Turn your amp on at least a few minutes before you start[/b] – it lets your valve amp warm up a bit. [b]Tune all your guitars[/b] (even your back- up) again as close to the start of your set as possible and make sure they're on hand and on stands. Things have a tendency to get knocked over in the heat of the moment. [b]Choose a song for soundcheck that will test the sound mix[/b] in the best way for all instruments in your band. [b]Listen carefully to the mix [/b]of instruments coming through the monitor speaker wedge – can you hear yourself and the rhythm section clearly to keep time? [b]Check as many of your sounds as you can:[/b] clean/crunch/distortion channels all need to be checked so they're at the right level. Ditto effects. [b]Talk to the other bands you're playing with[/b] on the night and find out what backline will be shared. While it's common for a headline band to let support acts share drum shells and stands, it's not for breakables like amps. [b]Be tuned-up and ready[/b] to take to the stage when the sound engineer needs you. [b] [b]Don't…[/b][/b] [b]Drink alcohol[/b] excessively before. It won't make you play any better! [b]Assume you'll be able to share gear [/b]and turn up with minimal kit. It should be easy to get contact numbers or email addresses for the other acts on the bill from the promoter or the venue, and it's common courtesy to ask first. [b]Crank your volume if your amp is being mic'd through the PA[/b] – you don't need a very loud onstage volume. Let the sound engineer get the levels. And you may not need your cab or combo front-on to the audience if it's being mic'd – angle it in a position best for you. [b]See soundcheck as a rehearsal or jam.[/b] One or two short songs should provide more than enough opportunity for the sound engineer to set up a decent mix. Taking liberties won't do you any favours with the other bands on the bill. [b]Leave your pedals running with the input plugged in[/b] for long periods of time ahead of the gig if you're using nine-volt batteries with your effects pedals – it drains the power unnecessarily. [b]Get bogged down with your onstage sound if you're playing outside.[/b] Put even more trust in the sound engineer's front of house mix – the nature of the external environment means your concern is playing in time, and the sound engineer's is making sure the audience get a good mix. [b]Play blazing lead lines when the sound engineer is tweaking the bass drum sound[/b] – he/she won't appreciate it. [b]Lose sight of the bigger picture[/b] – it's about attitude as well as the rig you're setting up. And remember that you get back what you put out. If you're confident, professional and polite, that's what you'll get back from the engineer and other bands. [b] The Gig - There's more to impressing the crowd than your blazing chops[/b] [b] [b]Do…[/b][/b] [b]Write a setlist for the show.[/b] Unless you're playing free jazz, you'll need a list of the songs you're playing and the order in which you're playing them. [b]Demand the audience's attention.[/b] The general rule of thumb is to open with a song that makes an impact. [b]Take a drink onstage with you[/b] – especially if you're a singer. You may be surprised to find your throat can get as dry as the Mojave desert onstage, and you'll soon be begging for water. [b]Realise that things can go wrong[/b] – it's just part of gigging. Have contingency plans in your head in case the worst happens, including an instrumental piece the rest of you can play to fill time if one of the musicians has a problem they need to sort. [b]Look people in the eye while you're performing[/b] – engaging with your audience is more than just about sound. [b]Signal to the engineer[/b] if you need to communicate with the desk mid-gig: for example, if you can't hear your guitar clearly through the monitors or you're too loud. [b]Relax, listen to the sound engineer and remember that, ultimately, it's about the audience, not the band.[/b] Nobody cares that much about your tone except you, so stop stressing about it. [b] [b]Don't…[/b][/b] [b]Amplify your guitar when you're tuning up.[/b] You should tune quickly and silently between songs. Buy an electronic tuner with an easily visible display. The audience don't want to hear you tuning and it gives a sloppy, amateurish impression. [b]Forget to say the name of your band between songs.[/b] If you're a support act and don't have a banner, you can't assume anyone knows who the hell you are [b]Allow long silences between songs.[/b] While the guitarist or bassist tunes up, it gives the singer an ideal opportunity to crack a joke or, if they're not a natural raconteur, fill the silence by plugging the band's website or merchandise. [b]Mess with your amp settings during the gig based on the monitor speaker mix[/b] – it isn't a reflection of what the audience and engineer can hear out front. [b]Take forever to pack up your gear.[/b] Unless you're the headline act, the next band want to get onstage before the audience drifts away and loses interest. There will be plenty of time for excessive alcohol consumption and chatting up groupies once your equipment is off stage. [b]Be sheepish with the audience.[/b] Forget apologetic amateurism and smack them right between the eyes with your set!
  15. They've been selling at under £300 for ages in the States and there are some 'friendly' US dealers who are more than happy to ship to UK in tax efficient ways. I've also heard of someone using the US pricing to negotiate a deal with a UK retailer to get one new for under £300 (but I'm damned if I can remember who it was!). Definitely quite a few dealers offering very good package deals for a head plus cab(s) too. The 750 doesn't seem to be moving in price much though
  16. Are they planning on offering rebates to all the customers that spent £500 on RH450's only to discover they are now for sale at £275 brand new?
  17. Interesting I have a Traveller 2x10 that I really like but I'm a big fan of 2x12 cabs. The 210 is smaller and lighter and fits perfectly in my car boot! Will do some measuring
  18. Standard issue on many Foderas - not least the Wooten signatures. I have them on my '86 and love them
  19. [quote name='voxpop' timestamp='1351194500' post='1848616'] I manage the Weybridge store of Sevenoaks. Always a good deal for fellow Basschatters. http://www.sevenoakssoundandvision.co.uk/products/category/Amplifiers/1765.0.4.3.46510.46510.0.0.0 Let me know if we have an amp that is of interest. [/quote] Big vote of confidence from me for Marc - helped me choose some speakers for a small music room and got me a great price as well
  20. [quote name='thisnameistaken' timestamp='1350993800' post='1845923'] I'd forgotten about that Godin, I like the look of those. [/quote] I've played the PJ configuration ones and thought they were very nice. Stupidly good value for a Canadian built bass. Store price is between £750 & £850 for the 2 pickup version. The 5 string ones will be in the country soon as well
  21. From the Distance Selling Regulations: Returning goods Only if it is covered in the contract and the written information can you require the consumer to pay for the cost of returning the ordered goods. You are not allowed to make any further charges, such as a restocking charge or an administration charge. If you do not include these details in the required written information then you cannot charge anything. You can never require consumers to pay the cost of returning substitute goods. If the goods are faulty or do not comply with the contract, you will have to pay for their return whatever the circumstances. The most important thing in this is that you have to contact them within 7 days and state the reasons for returning. If you miss the 7 day deadline it can get more complicated. If they are sending unchecked items straight from a warehouse then I think they should state tis in the terms somewhere. However, I'm not 100% sure about this. A lot of people send things out without checking them and, in fact, a lot of customers refuse to even accept goods that have been previously opened. Personally I'd always expect a guitar to have been checked over and, from a decent shop, set up properly so it's playable etc before I received it.
  22. [quote name='Stacker' timestamp='1350895306' post='1844646'] Snappy, growly '63 (or '64) any day. Don't like gloss necks on basses. [/quote] The '64 has a gloss neck refinish (unfortunately). Ttrued them all through the little MarkBass LMII plus MB 210 today and it made quite a difference compared to the B15. The '71 wasn't really at the races without a lot of bass boost. Neck still feeling nice and getting used to those tiny mandolin frets. '65 a bit livelier and brighter, really nice all round sound with the extra edge coming from the modern MB combination (in the interests of comparison, and my sanity, I kept all amp controls flat!). The '64 began to sound a trifle flabby in the low end. Still very nice but not as good a match as the B15. The gloss neck and jumbo frets not as easy to work with. '63 just killed . Still had a great low end punch and plenty of snarl without ever sounding thin or brittle. This one definitely seems to be the overall winner in terms of tone and playability for me with the '65 now edging ahead of the '64.
  23. [quote name='RichF' timestamp='1350749234' post='1843045'] Blow a guy's fantasies why dont you! [/quote] It's ok, I've had the 'baronial tower' fantasy a few times but unfortunately all my spare cash has gone on guitars, amps, cars and bikes
×
×
  • Create New...