My gear downsizing continues. I bought this from the forum a few months back at £400 and have since added a DI extension lead (as the head does not have an XLR out) and a neat padded bag (not EA but fits perfectly), together costing about £35. Will sell for £390 posted (£380 collected) which is a bargain for an amp of this quality and in basically near-perfect condition (they are £550 new at BassDirect and the XLR conversion cable is £14 on top).
Works fabulously for double bass (has two channels, one specifically voiced for piezo input) but I've also used it with my fretless acoustic/electric bass and its both loud and ludicrously light.
Stock pic (mine looks identical):
[attachment=136694:EAmiucro1200.jpg]
Specs:
Inputs: Configuration: 2 independent channels- Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass
•Input Impedance: 1Meg ohm input impedance on both inputs
•Trim controls: Independent channel level adjustments, DI output level, and high pass filter
•Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2
•Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
•EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages-Channel 2 only)
•Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers
•Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4" stereo wired as TRS)
•Protection: Internal cooling fan, thermal and overload
•Line Voltage: 100/120 - 240 volts internally selected via jumper
•Frequency Response: 20Hz to 20kHz +/- 3dB
•Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms
•Size: 2.1"H x 8.5"W x 5.4"D
•Weight: 2.3 lbs.