Jump to content
Why become a member? ×

DanOwens

Member
  • Posts

    1,119
  • Joined

  • Last visited

Posts posted by DanOwens

  1. I bet there's lots who are much better at this than I, but sound-proof usually means a room built within a room where the inner room is mechanically decoupled from the outer room. There are lots of steps in between that, but fully soundproofed is a monumental task (especially when you take into account airflow etc).

    Acoustically treated, however, is easy. Just put baffles everywhere!

    • Like 1
  2. On 14/10/2019 at 08:06, Kiwi said:

    Yeah the one thing I wish it had was a pass-through defeat switch so that when the freeze was in effect, the input jack was disconnected.  Maybe a nice effect pedal guru will one day develop a hack for it...

    EHX Superego with a mute pedal in the front?

  3. Brother I feel your pain. I had a custom routing switcher so I could split / sum multiple boards and pitch-to-midi. I was a dreadlocked DnB fanatic. I'm now a bald double bass player; make of that what you will!

    I wanted 5 parallel signal paths and the band were all midi-syncd so we had a lot of flexibility; my problem came in the sum / split phase and I think if I was doing it today my setup would be similar to you (I was doing it 10 bloody years ago!). Keep up the efforts! 

    • Like 1
  4. 13 hours ago, AngelDeVille said:

    No, any radius changes will be a surprise, and limited by the existing bridge adjustability.

    If it's a normal BBOT bridge, or even something more fancy, you're unlikely to get anywhere near the radius of a double bass. I suppose you could add some longer grub screws to gain height, but obviously the higher the saddle, the greater angle between the saddle and the terminus, resulting in tension changes and the risk of snapping. If you were aiming for a slightly more exaggerated radius to the board than on a Fender, like maybe 7" or so, then you might get the bridge to match without modifying it too much, otherwise you're looking at a bespoke bridge solution too. 

    • Like 1
  5. 12 hours ago, gypsyjazzer said:

    Hi Dan--- Like you I have tried two different sets of Innovation strings. I should imagine  that they are probably near the gut sound--(Never heard a live DB with guts on though. ) I found Innovation strings quite a good sound--easy to play--but peg winding issues--the windings  tend to fray if you put them on another bass--and they do not hold their tuning to well.

    Do gut strings hold their tuning like metal strings?

    Do all makes of synthetic strings have tuning issues?

    I guess I've been really lucky then as the Honeys on my NS have been on two other basses previously and I'm having no issues with windings, and before them I briefly had a pair of Silver Slaps that had been on one bass previously and had no winding issues either. It took about a week of practising before I could be confident that the Honeys would be predictable in their tuning, but that's not unreasonable in my mind since there's a lot of mass going on.

    Which Innovations did you try and for how long did you have them on the bass? 

    I'd love to play about with some guts, maybe on a new bass....

  6. I play in an acoustic blues band and we stray into bluegrass on occasion. I mostly play EUB live, U-Bass in rehearsal, Double Bass if there's space and I got the Precision out for the last recording session. I'd focus on note choice, laying back in the pocket and having fun before i decided which instrument to choose, but then I already played DB, EUB and Slab. 

    If I could play just DB, I certainly would, but my instrument doesn't prevent me from playing bluegrass. If you're looking for an excuse to buy a DB, though, then I wholeheartedly support your decision!

  7. I feel open mics, jams or any number of by-the-seat-of-your-pants experiences are of such great value to our development. I used to play a lot of jazz; now I do a lot of accompaniment on the fly at open mics. I absolutely love it, and the workout of rapidly decoding whats going on whilst trying to play something that sounds good... well I'd take that over rehearsing the same tunes again and again!

    • Like 2
  8. I play in an acoustic blues trio. We got an XR18 last year and we're (I'm) loving it. 

    Live our line up is usually me on EUB and Vocals on stage left (sometimes doghouse), Rob in the middle on acoustic guitar (DI), National (SM57), Banjo (DI) and Vocals, Dan on the end on acoustic guitar (DI), Mandolin (DPA4099), Kick Drum (Audix thing), Harmonica (Bulletini mic) and Vocals.

    So we've got a lot of mics on a stage which is often about 6mx4m, playing venues of maximum 200 at the mo (pubs, bars, etc). 

    Our first generation HK LUKAS has failed twice recently so we're looking to replace it. One of the guys in the band has suggested a pair of RCF 710s, no sub. I'm not too fussed about huge low end as our sound isn't very subby, and I've got lots of mics in close proximity to the tops so volume is always a battle. 

    Is a pair of 710s a good idea? I doubt I could push to more than £800 and I want the peace of mind with buying new. What would you suggest?

  9. 3 hours ago, geoham said:

    - What do we do if the iPad crashes or WiFi stops working?

    I play in a trio and nearly every song requires some channels muting and unmuting (new instruments). My ancient iPad crashes at least once a gig but we just handle it. If you're not messing with the desk between every tune then you'll probably be alright. If you're using a relatively decent tablet, then you'll definitely be fine.

    • Thanks 1
  10. 2 hours ago, Nicko said:

    I'm not intending to get a separate external router, and was hoping to use my laptop with an ethernet cable as backup in case the wifi fails - is this viable?

    Yeah, that's absolutely possible, but that wifi will fail pretty promptly so you'll want your cables ready to go in an emergency. If you've got the space then just go wired all the time (I would if I could!)

  11. I like the sound of my Wegen gypsy pick on my bass but I don't use it that often as they're kinda expensive. Very sharp attack despite the bevelled edges. They're 5mm and have an innovative contour / crosshatching that means they're not going anywhere once they're gripped (even lightly)

  12. I bought a Yamaha DD65 to trigger samples through midi and I hated the playing experience. The pads were too small and the clacking of sticks on ABS plastic when you miss the centre of the pad drove me crazy.

    I then bought an Alesis Sample Pad and I loaded the samples onto an SD card. That was a much better playing experience as there isn't as much plastic to accidentally hit since the rubber pads are larger. It also seemed to respond to dynamics much better. They go for £70 secondhand on ebay.

  13. 2 minutes ago, dave moffat said:

    What strings do you use? Got Aquila thunderblacks on mine at the moment definitely an imorovement on the white and red Aquilas. Passing notion to try Worths.

    I think they’re Aquilas (they’re off-white/cream). I considered changing them but my kids and the band kids love making cheese-string jokes!

    • Haha 1
  14. I'm considering modding my bridge to add a tension screw as my Big Single is so susceptible to pressure changes that it becomes a little inconsistent in my sound. Some gigs its rich and bassy but other times its a bit thin and middy. I'm using a variety of preamps so it isn't an impedance thing.

  15. 20 hours ago, dave moffat said:

    Just laziness, 😄

    I can have my mini acoustic downstairs in front of the TV and just work on a little piece now and again (during the ads/boring bits), whilst I'd have to go upstairs probably unplug the  Uke bass, plug in the electric and switch on the amp. And the kettle/coffee is downstairs. I find little and often works best for me when I'm trying to learn.

    I used to take my EUB to open mic nights but now I always take the Uke Bass! Sounds great, elicits interest, easy to set up. 

×
×
  • Create New...